The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Dielectric Dispersion: A New Wireline Petrophysical Measurement
Abstract
Dielectric measurements and interpretation, introduced with great promise in the 1980s, have not found widespread use owing to measurement limitations, moderate accuracy, and insufficient quality control. This paper presents a new-generation dielectric tool that overcomes these limitations and brings extra information for more accurate petrophysical formation-evaluation. One of the revolutionary advances offered by this tool is the continuous measurement of dielectric dispersion (variation of formation dielectric properties as a function of the frequency) at 1-in vertical resolution. The tool uses multi-spacings antenna arrays operating at multiple frequencies in the MHz to GHz range. Moreover, transmitter and receiver antennas have colocated longitudinal and transverse polarizations. The wealth of recorded data will allow interpreters to both adapt the answer product to the reservoir fluids and geology, and also to provide acquisition quality-controls and error estimates on the results. Carbonate and heavy oil reservoirs are becoming more and more important. In these two environments, the new tool provides unique answers to better characterize these reservoirs. This tool also addresses traditional dielectric formation-evaluation in fresh water and thinly laminated sands. Answer products offered by this new tool can be classified in three categories. Pore-fluid analysis from the muti-spacings high frequency measurements•Hydrocarbon residual saturation and invaded zone water salinity•Invasion profile: hydrocarbon saturation profile in heavy oil reservoirMatrix analysis from dielectric dispersion•Carbonates: textural information (Archie m cementation factor)•Shaly sands: high resolution clay volume and anisotropyGeological structure analysis from the muti-polarizations and high resolution•Thin beds analysis•Structural anisotropy measurement in very thin beds•Geological features extraction•Carbonate classification This paper reviews the dielectric dispersion physics, then describes the tool's architecture, measurements, and data processing chain. Field test examples illustrate the enhanced interpretation potential of dielectric dispersion measurements from this tool.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics
Cole, K. S., & Cole, R. H. (1941) · The Journal of Chemical Physics · doi:10.1063/1.1750906 · Cited by 10,152
Cited by
Laboratory characterisation of shale properties
Josh, M., Esteban, L., Delle Piane, C., Sarout, J., Dewhurst, D. N., & Clennell, M. B. (2012) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2012.01.023 · Cited by 604
Near-Surface Applied Geophysics
Everett, M. E. (2013) · Cambridge University Press eBooks · doi:10.1017/cbo9781139088435 · Cited by 381
Metadata
- Authors
- Hizem, M., Budan, H., Devillé, B., Faivre, O., Mossé, L., & Simon, M.
- Venue
- SPE Annual Technical Conference and Exhibition
- Publisher
- SPE
- Published
- 2008-09-21
- OpenAlex
- W1970957283
- Cited by
- 189
- References
- 1
- FWCI
- 19.01
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.