Carbon Dioxide Corrosion in Oilwell Cements
The DOI matches its Crossref record.
Abstract
Carbon dioxide corrosion studies of oil-well Portland cements were initiated using a new micro-sample technique to determine the effect of carbonic acid on portland cement slurry formulations and to develop a high carbonic acid corrosion-resistant cement for carbon dioxide Enhanced Oil Recovery applications. Earlier results from studies using two-inch API cement cubes showed carbonic acid had essentially no effect on cement after relative short test periods at elevated temperatures. Similar results with two-inch API cement cubes also were reported in recent literature. Because carbonic acid corrosion in cements was difficult to observe and measure using two-inch API cement cubes, a new microsample technique was developed. Use of this new technique, which represents an accelerated testing method, showed oil-well cements undergo a rapid deterioration in a wet carbon dioxide environment. Similar tests with two-inch cubes showed essentially no cement deterioration under the same conditions. Experimental details of this new microsample technique are discussed. Data relating cement strength loss and carbon dioxide penetration depths to cement type and slurry formulation are reviewed. Included in the discussion is a new cementing formulation which shows significant promise as a high carbondioxide-resistant, oil-well cement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Degradation of Well Cement by CO 2 under Geologic Sequestration Conditions
Kutchko, B. G., Strazisar, B. R., Dzombak, D. A., Lowry, G. V., & Thaulow, N. (2007) · Environmental Science & Technology · doi:10.1021/es062828c · Cited by 604
Review of integrity of existing wells in relation to CO2 geological storage: What do we know?
Zhang, M., & Bachu, S. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2010.11.006 · Cited by 344
Heterogeneous porosity distribution in Portland cement exposed to CO2-rich fluids
Rimmelé, G., Barlet-Gouédard, V., Porcherie, O., Goffé, B., & Brunet, F. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.03.022 · Cited by 307
Rate of CO2 Attack on Hydrated Class H Well Cement under Geologic Sequestration Conditions
Kutchko, B. G., Strazisar, B. R., Lowry, G. V., Dzombak, D. A., & Thaulow, N. (2008) · Environmental Science & Technology · doi:10.1021/es800049r · Cited by 305
Experimental assessment of brine and/or CO2 leakage through well cements at reservoir conditions
Bachu, S., & Bennion, D. B. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2008.11.002 · Cited by 270
A solution against well cement degradation under CO2 geological storage environment
BARLETGOUEDARD, V, RIMMELE, G., PORCHERIE, O., QUISEL, N., & DESROCHES, J. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2008.07.005 · Cited by 182
Well Technologies for CO 2 Geological Storage: CO 2 -Resistant Cement
Barlet-Gouédard, V., Rimmelé, G., Goffé, B., & Porcherie, O. (2007) · Oil & Gas Science and Technology - Revue de l'IFP · doi:10.2516/ogst:2007027 · Cited by 167
Metadata
- Authors
- Bruckdorfer, R. A.
- Venue
- SPE Rocky Mountain Regional Meeting
- Publisher
- SPE
- Published
- 1986-05-19
- OpenAlex
- W2072646555
- Cited by
- 77
- References
- 0
- FWCI
- 0.00
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.