The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Mobility and Conformance Control for CO2 EOR via Thickeners, Foams, and Gels - A Literature Review of 40 Years of Research and Pilot Tests
Abstract
Carbon dioxide (CO2) has been used commercially to recover oil from geologic formations by enhanced oil recovery (EOR) technologies for over 40 years. The U.S. Department of Energy Office of Fossil Energy and its predecessor organizations have supported a large number of laboratory and field projects over the past decades in an effort to improve the oil recovery process including investments to advanced reservoir characterization, mobility control, and conformance of CO2 flooding. Currently, CO2 EOR provides about 280,000 barrels of oil per day, just over 5 percent of the total U.S. crude oil production. Recently CO2 flooding has become so technically and economically attractive that CO2 supply, rather than CO2 price, has been the constraining developmental factor. Carbon dioxide EOR is likely to expand in the United States in upcoming years due to "high" crude oil prices, natural CO2 source availability, and possible large anthropogenic CO2 sources through carbon capture and storage (CCS) technology advances. Despite its well-established ability to recover oil, the CO2 EOR process could be improved if the high mobility of CO2 relative to reservoir oil and water can be effectively and affordably reduced. The CO2 EOR industry continues to use water-alternating-with-gas (WAG) as the technology of choice to control CO2 mobility and/or mechanical techniques (e.g., cement, packers, well control, infield drilling, and horizontal wells) to help control the CO2 flood conformance. If the "next generation" CO2 EOR target of 67 billion barrels is to be realized, new solutions are needed that can recover significantly more oil than the 10–20% of the original oil in place associated with current flooding practices. A recent literature review [Enick and Olsen, 2011] concentrates on the history and development of CO2 mobility control and profile modification technologies in the hope that stimulating renewed interest in these chemical techniques will help to catalyze new efforts to overcome the geologic and process limitations such as poor sweep efficiency, unfavorable injectivity profiles, gravity override, high ratios of CO2 to oil produced, early breakthrough, and viscous fingering. This paper is a concise overview of the recent, comprehensive literature review available on the NETL website entitled "Mobility and Conformance Control for Carbon Dioxide Enhanced Oil Recovery (CO2-EOR) via Thickeners, Foams, and Gels – A Detailed Literature Review of 40 Years of Research" [Enick and Olsen, 2011] that focuses on attempts to enhance carbon dioxide mobility control (in-depth, long-term processes that cause CO2 to exhibit mobility comparable to oil) and profile modification/conformance control (near-wellbore, short-term process primarily intended to greatly reduce the permeability of a thief zone) using CO2 thickeners and CO2 foams. In particular, this paper focuses on the history of CO2 thickeners.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Gelation of CO 2 : A Sustainable Route to the Creation of Microcellular Materials
Shi, C., Huang, Z., Kilic, S., Xu, J., Enick, R. M., Beckman, E. J., Carr, A. J., Melendez, R. E., & Hamilton, A. D. (1999) · Science · doi:10.1126/science.286.5444.1540 · Cited by 200
Self-citationWilliams, L. L., Rubin, J. B., & Edwards, H. W. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0497543 · Cited by 193
CO2-solubility of oligomers and polymers that contain the carbonyl group
Shen, Z., McHugh, M. A., Xu, J., Belardi, J., Kilic, S., Mesiano, A., Bane, S., Karnikas, C., Beckman, E., & Enick, R. (2003) · Polymer · doi:10.1016/s0032-3861(03)00020-x · Cited by 184
Self-citationOxygenated Hydrocarbon Ionic Surfactants Exhibit CO 2 Solubility
Fan, X., Potluri, V. K., McLeod, M. C., Wang, Y., Liu, J., Enick, R. M., Hamilton, A. D., Roberts, C. B., Johnson, J. K., & Beckman, E. J. (2005) · Journal of the American Chemical Society · doi:10.1021/ja052037v · Cited by 94
Self-citationThickening Carbon Dioxide With the Fluoroacrylate-Styrene Copolymer
Xu, J., Wlaschin, A., & Enick, R. M. (2003) · SPE Journal · doi:10.2118/84949-pa · Cited by 68
Self-citationCellulose triacetate oligomers exhibit high solubility in dense CO2
Hong, L., Fisher, M., Enick, R. M., & Beckman, E. J. (2008) · Green Chemistry · doi:10.1039/b800812d · Cited by 12
Self-citation
Cited by
An Integrated Framework for Optimizing CO2 Sequestration and Enhanced Oil Recovery
Dai, Z., Middleton, R., Viswanathan, H., Fessenden-Rahn, J., Bauman, J., Pawar, R., Lee, S.-Y., & McPherson, B. (2014) · Environmental Science & Technology Letters · doi:10.1021/ez4001033 · Cited by 364
CO2 Accounting and Risk Analysis for CO2 Sequestration at Enhanced Oil Recovery Sites
Dai, Z., Viswanathan, H., Middleton, R., Pan, F., Ampomah, W., Yang, C., Jia, W., Xiao, T., Lee, S.-Y., McPherson, B., et al. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b01744 · Cited by 287
Metadata
- Authors
- Enick, R. M., Olsen, D., Ammer, J., & Schuller, W.
- Venue
- SPE Improved Oil Recovery Symposium
- Publisher
- SPE
- Published
- 2012-04-14
- OpenAlex
- W2062864053
- Cited by
- 354
- References
- 6
- FWCI
- 39.69
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mobility and Conformance Control for CO2 EOR via Thickeners, Foams, and Gels - A Literature Review of 40 Years of Research and Pilot Tests. https://app.cochat.ai/papers/10.2118/154122-ms
- The paper
- Enick, R. M., Olsen, D., Ammer, J., & Schuller, W. (2012). Mobility and Conformance Control for CO2 EOR via Thickeners, Foams, and Gels - A Literature Review of 40 Years of Research and Pilot Tests. SPE Improved Oil Recovery Symposium. https://doi.org/10.2118/154122-ms
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.