The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Discrete-Fracture Modeling of Complex Hydraulic-Fracture Geometries in Reservoir Simulators
Abstract
Summary: Hydraulic fracturing is a dominant technology in unconventional resources development. Recent advances in fracture-diagnostic tools and fracture-propagation models make it necessary to model fractures with complex geometries in reservoir-simulation studies. In this paper, we present an efficient method to model fractures with complex geometries with reservoir simulators. Through nonneighboring connections (NNCs), an embedded discrete-fracture modeling (EDFM) formulation is applied to reservoir simulators to properly model fractures with complex geometries such as fracture networks and nonplanar hydraulic fractures. We demonstrate the accuracy of the approach by performing a series of case studies with two commercial reservoir simulators and comparing the results with local-grid-refinement (LGR) models and a semianalytical solution. The limitations of the model are also discussed. In addition, the results show its computational efficiency as the complexity of fractures increases. We also present two numerical case studies to demonstrate the applicability of our method in naturally fractured reservoirs. The nonintrusive application of the EDFM allows insertion of the discrete fractures into the computational domain and the use of original functionalities of the simulators without having access to the source code of the simulators. It may be easily integrated into existing frameworks for unconventional reservoirs to perform sensitivity analysis, history matching, and production forecasting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
A New Two-Constant Equation of State
Peng, D.-Y., & Robinson, D. B. (1976) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160057a011 · Cited by 13,046
Monteagudo, J. E., & Firoozabadi, A. (2004) · Water Resources Research · doi:10.1029/2003wr002996 · Cited by 237
A note on groundwater flow along a hillslope
Daly, E., & Porporato, A. M. (2004) · Water Resources Research · doi:10.1029/2003wr002438 · Cited by 64
Metadata
- Authors
- Xu, Y., Cavalcante Filho, J. S., Yu, W., & Sepehrnoori, K.
- Venue
- SPE Reservoir Evaluation & Engineering
- Publisher
- Society of Petroleum Engineers (SPE)
- Published
- 2016-08-31
- Volume
- 20
- Issue
- 02
- Pages
- 403-422
- ISSN
- 1094-6470 (ISSN-L)
- 1930-0212
- OpenAlex
- W2512375282
- Cited by
- 269
- References
- 4
- FWCI
- 22.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Discrete-Fracture Modeling of Complex Hydraulic-Fracture Geometries in Reservoir Simulators. https://app.cochat.ai/papers/10.2118/183647-pa
- The paper
- Xu, Y., Cavalcante Filho, J. S., Yu, W., & Sepehrnoori, K. (2017). Discrete-Fracture Modeling of Complex Hydraulic-Fracture Geometries in Reservoir Simulators. SPE Reservoir Evaluation & Engineering. https://doi.org/10.2118/183647-pa
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.