Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 476

The DOI matches its Crossref record.

A Laboratory Evaluation of the Wettability of Fifty Oil-Producing Reservoirs

Treiber, L.E., Owens, W.W.·1972·Society of Petroleum Engineers Journal

Abstract

A knowledge of the preferential wetting characteristics of a reservoir can frequently be of assistance to the field or reservoir engineer, particularly in such areas as (1) assessing the particularly in such areas as (1) assessing the applicability of restored state data; (2) interpreting electric logs; (3) selecting well workover fluids; (4) applying laboratory capillary pressure data; and (5) applying special fluid injection processes. Because of this broad usefulness, wettability information was gathered on more than 50 oil-producing reservoirs from many areas of the world. One-half of the reservoirs studied, however, were located in West Texas and Wyoming. The reservoirs studied ranged in depth from 1,700 to 13,000 ft, in temperature from 80 deg. to 240 deg. F; the reservoir oils ranged from 14 deg. to 50 deg. APl gravity. Contact angle measurements in a glass-teflon cell using uncontaminated samples of the reservoir crudes provided a quantitative indication of the ability of the various crudes to wet reservoir rock minerals in the presence of water. The minerals used were selected from petrographic studies of cores fro the reservoirs of interest. For many of the reservoirs studied, flow data on native-state or fresh cores were available to provide a qualitative comparison of the reservoir wetting preference. The results obtained in the contact angle cell tests indicated that for approximately 27 percent of the reservoirs studied, water wets the rock mineral surfaces more strongly than oil; for about 66 percent of the reservoirs, oil wets the rock mineral surfaces more strongly than water; and in the remaining 7 percent of the reservoirs, the mineral surfaces were percent of the reservoirs, the mineral surfaces were not wet strongly by either water or oil. Excellent agreement was found between these results and the qualitative indication of rock wettability obtained from native-state or fresh core relative permeability tests. The tests further showed that contamination by air and certain metallic ions can seriously alter the wetting properties of many reservoir crude oils. Introduction: The relative preference of reservoir rock pore surfaces to be wet by water or oil has long been of concern, and perhaps some bewilderment to the oil industry. Several early investigator of the relative wetting tendencies of solids by water and various hydrocarbons found that some solid surfaces exhibited a definite affinity to be wet preferentially by hydrocarbons. Other early research demonstrated that many crude oils contain natural surface-active agents that are readily adsorbed at solid-liquid interfaces to render the solid surface oil-wet. numerous subsequent studies of flow in porous media have demonstrated the porous media have demonstrated the significant effect of rock wetting preference on oil displacement by water. Some of the more recent studies would appear to provide rather conclusive evidence that reservoir rock wetting preference may cove a broad spectrum. however, preference may cove a broad spectrum. however, there is still a strong tendency by some in the industry to accept the implications of research conducted by Leverett and others that all reservoirs are preferentially water-wet. If reservoir rock wetting preference were not an important factor in many aspects of oil production, further elucidation on the subject would be on little practical importance. its real significance, however, practical importance. its real significance, however, can perhaps best be demonstrated by a few examples.1. The quantitative interpretation of water saturation from electric log response by Archie's method requires a numerical value of the saturation exponent, n, which is directly related to wettability.2. In well completions or workovers, it is desirable that the kill fluid or wellbore fluid itself not have a prolonged adverse effect on the well productivity. If a formation is oil-wet, microscopic productivity. If a formation is oil-wet, microscopic trapping of water (as a nonwetting phase), which may have invaded the formation furring its use as a well control fluid, could result in serious, prolonged reduction in formation oil flow rates after putting the well on production.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2118/3526-pa

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 476

Metadata

Authors
Treiber, L. E., & Owens, W. W.
Venue
Society of Petroleum Engineers Journal
Published
1972-12-01
Volume
12
Issue
06
Pages
531-540
ISSN
0197-7520 (ISSN-L)
OpenAlex
W1997454577
Cited by
476
References
0
FWCI
0.00
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Laboratory Evaluation of the Wettability of Fifty Oil-Producing Reservoirs. https://app.cochat.ai/papers/10.2118/3526-pa
The paper
Treiber, L. E., & Owens, W. W. (1972). A Laboratory Evaluation of the Wettability of Fifty Oil-Producing Reservoirs. Society of Petroleum Engineers Journal. https://doi.org/10.2118/3526-pa

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.