The DOI matches its Crossref record.
A Method for Predicting the Performance of Unstable Miscible Displacement in Heterogeneous Media
Open accessAbstract
KOVAL, E.J., CALIFORNIA RESEARCH CORP., LA HABRA, CALIF. Practical miscible displacement processes will be characterized by fingering of the solvent into the oil. The fingering process is brought on by viscosity differences, and can be accentuated by channeling and longitudinal dispersion. The effects of these factors on the efficiency of unstable completely miscible displacements are combined in what is called the K-factor method. This method, analogous to the Buckley-Leverett method, predicts recovery and solvent cut as a function of pore volumes of solvent injected. Experimental data are included and show excellent agreement with theory for a wide variety of sandstone cores and viscosity ratios. Introduction: Theoretical considerations, laboratory experiments, and pilot tests lead to the conclusion that miscible displacements in the field will be unstable. In an unstable miscible displacement, the solvent fingers through the oil. This fingering leads to early breakthrough of the solvent and an extended period during which both oil and solvent are produced.For such a system, there appear to be four principal factors which bring about or accentuate the effects of instability: longitudinal dispersion (including geometrical effects), channeling, viscosity differences and gravity differences. Other factors, such as diffusion and flooding rate, can also influence the effects of instability, but at the flooding rates considered in this report, circa 15 ft/D, they are unimportant. Longitudinal dispersion can be thought of as a spreading of the solvent front caused by the presence of microscopic inhomogeneities. Channeling of the solvent occurs when a porous medium has macroscopic inhomogeneities; i.e., gross permeability variations. Viscosity differences lead to fingering of the less viscous solvent. This difference in viscosity accelerates the growth of fingers along paths previously developed because of permeability variations. Gravity differences lead to overriding of the usually less dense solvent. Although gravity effects are generally small at a flooding rate of 15 ft/D, they would, nevertheless, unnecessarily complicate the interpretation of flooding experiments. For this reason, all the experiments reported herein were done with matched density fluids.Fingering and the resultant poor areal sweep were recognized early as the dominant influences on the efficiency and the economics of miscible displacement processes. Much research effort has been spent on ways to minimize fingering and increase areal sweep such as the use of graded viscosity slugs or water slugs. Some researchers attempted to work out ways to prevent fingering completely; i.e., to achieve a stable displacement through gravity or latitudinal dispersion stabilization. Others did not attempt to control fingering but obtained an economic process by merely recycling the solvent and sweeping pattern by pattern.During this period, all aspects of fingering came under close scrutiny. Some researchers reported on how fingering looks and how it is affected by viscosity ratio, geometry, and slug size. Peaceman and Rachford suggested a mathematical approach to the prediction of unstable miscible displacements in relatively homogeneous sand packs, but their work cannot be extended conveniently to heterogeneous systems. Hence for a heterogeneous system, no method is presently available for predicting solvent cut and recovery as functions of pore volumes of solvent injected.The purpose of this investigation was to attempt to fill in the gap in our knowledge concerning the prediction of performance of unstable miscible displacements. Necessarily, the system selected for study was a relatively simple one. The restrictions placed on the system were:The system was linear;The solvent was miscible in all proportions with the oil in place;The solvent was continuously injected into the porous medium;Gravitational effects were eliminated by matching densities andAll the flood rates were high and constant at 15 ft/D to avoid any small rate effect and to minimize any diffusion effects. To simplify and to indicate that both longitudinal dispersion and channeling arise from permeability variations, the effects which they cause or influence have been termed heterogeneity effects. SPEJ P. 145^
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Sahimi, M. (1993) · Reviews of Modern Physics · doi:10.1103/revmodphys.65.1393 · Cited by 1,082
Farmer, C. L. (2002) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.267 · Cited by 366
Multiphase flow and transport modeling in heterogeneous porous media: challenges and approaches
Miller, C. T., Christakos, G., Imhoff, P. T., McBride, J. F., Pedit, J. A., & Trangenstein, J. A. (1998) · Advances in Water Resources · doi:10.1016/s0309-1708(96)00036-x · Cited by 318
Metadata
- Authors
- Koval, E. J.
- Venue
- Society of Petroleum Engineers Journal
- Publisher
- Society of Petroleum Engineers (SPE)
- Published
- 1963-06-01
- Volume
- 3
- Issue
- 02
- Pages
- 145-154
- ISSN
- 0197-7520 (ISSN-L)
- OpenAlex
- W2003399012
- Cited by
- 510
- References
- 0
- FWCI
- 3.75
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Method for Predicting the Performance of Unstable Miscible Displacement in Heterogeneous Media. https://app.cochat.ai/papers/10.2118/450-pa
- The paper
- Koval, E. J. (1963). A Method for Predicting the Performance of Unstable Miscible Displacement in Heterogeneous Media. Society of Petroleum Engineers Journal. https://doi.org/10.2118/450-pa
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.