Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 204

The DOI matches its Crossref record.

Water-In-Crude Oil Emulsion Stability And Emulsion Destabilization By Chemical Demulsifiers

Jones, T.J., Neustadter, E.L., Whittingham, K.P.·1978·Journal of Canadian Petroleum Technology

Abstract

The measurement of static physico-chemical properties of oil-water interfaces provides a useful method of indicating where problem emulsion stability areas arise for water-in-crude oil emulsions and the effectiveness of chemical demulsifiers in resolving these problems. The paper includes a discussion of interfacial tension, interfacial shear viscosity and interfacial film compressibility, particularly as applied to complex crude oil systems, and deals with the modification of these properties on the addition of a chemical demulsifier. Introduction: Stable water-in-crude oil emulsions occur at many stages during the production and processing of much of the world's oil. The breaking of these emulsions, frequently by the addition of a chemical demulsifier, is an essential step. Factors that affect the stability of such emulsions, and the role played by the demulsifier in destabilizing them, are of paramount importance. Little experimental information exists for complex crude oil systems. It has been suggested(1) that the structural mechanical properties of the natural crude oil emulsifiers in the interfacial layer surrounding the drop are important. This layer provides a resistance to coalescence in the final stage of emulsion breaking. The chemical demulsifier is thought to destabilize the emulsion by causing a disintegration of this layer at the interface. This work supports that viewpoint. Static physico-chemical properties of crude oil/water interfaces have been evaluated over a variety of conditions and correlations with emulsion stability, particularly those encountered during oil production and processes, have been sought. Thus, the relevance of oil/water interfacial tension to emulsion formation and stability has been investigated. The influence of interfacial shear viscosity (and viscoelasticity) on the coagulation stage of emulsion resolution has been examined. Also, the resistance of interfacial films to expansion/compression has been studied and the effect on coalescence elucidated. Finally, modification of these physico Mchemical interfacial properties on the addition of a chemical demulsifier has been investigated, with a view to determining the additive's ability to destabilize such emulsions. Interfacial Tension: Oil/water interfacial tension changes were measured by the method outlined in reference (2). Previous work(3) has shown that interfacial tension lowering alone is not an emulsion stabilizing factor. Table 1 shows the influence of various dissolved salts on γ o/w of Ninian crude oil/ water interfaces. These systems have widely different emulsion stabilities at 25 °C, yet the interfacial tension values are hardly different. Mass Transport: As well as adsorption of surfactants at the interface, mass transport of water-soluble crude oil components across the oil/water interface will also influence the measured γo/w lowering. Figure 1 shows the effect obtained by pre-equilibrating the crude oil/water phases. This results in a more rapid lowering of γ o/w with time, but with the same final value of interfacial tension being achieved. Where the illustrated effect of pre-equilibration is not observed, the anomalous behaviour can usually be attributed to bulk aqueous-phase pH drifts (in non-equilibrated systems) due to transport of acidic material (predominantly across the mid pH range). Any field-added chemical demulsifier in the crude oil will also cause anomalous effects.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.2118/78-02-08

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 204

Metadata

Authors
Jones, T. J., Neustadter, E. L., & Whittingham, K. P.
Venue
Journal of Canadian Petroleum Technology
Published
1978-04-01
Volume
17
Issue
02
ISSN
0021-9487 (ISSN-L)
OpenAlex
W2041874824
Cited by
204
References
0
FWCI
1.02
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Water-In-Crude Oil Emulsion Stability And Emulsion Destabilization By Chemical Demulsifiers. https://app.cochat.ai/papers/10.2118/78-02-08
The paper
Jones, T. J., Neustadter, E. L., & Whittingham, K. P. (1978). Water-In-Crude Oil Emulsion Stability And Emulsion Destabilization By Chemical Demulsifiers. Journal of Canadian Petroleum Technology. https://doi.org/10.2118/78-02-08

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.