The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Incorporating 4D Seismic Data in Reservoir Simulation Models Using Ensemble Kalman Filter
Abstract
Summary: A method based on the ensemble Kalman filter (EnKF) for continuous model updating with respect to the combination of production data and 4D seismic data is presented. When the seismic data are given as a difference between two surveys, a combination of the ensemble Kalman filter and the ensemble Kalman smoother has to be applied. Also, special care has to be taken because of the large amount of data assimilated. Still, the method is completely recursive, with little additional cost compared to the traditional EnKF. The model system consists of a commercial reservoir simulator coupled with a rock physics and seismic modeling software. Both static variables (porosity, permeability, and rock physic parameters) and dynamic variables (saturations and pressures) may be updated continuously with time based on the information contained in the assimilated measurements. The method is applied to a synthetic model and a real field case from the North Sea. In both cases, the 4D seismic data are different variations of inverted seismic. For the synthetic case, it is shown that the introduction of seismic data gives a much better estimate of reservoir permeability. For the field case, the introduction of seismic data gives a very different permeability field than using only production data, while retaining the production match.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Approach to Linear Filtering and Prediction Problems
Kalman, R. E. (1960) · Journal of Basic Engineering · doi:10.1115/1.3662552 · Cited by 31,751
Inverse Problem Theory and Methods for Model Parameter Estimation
Tarantola, A. (2005) · doi:10.1137/1.9780898717921 · Cited by 6,585
Evensen, G. (1994) · Journal of Geophysical Research: Oceans · doi:10.1029/94jc00572 · Cited by 5,371
Self-citation
Cited by
Ensemble smoother with multiple data assimilation
Emerick, A. A., & Reynolds, A. C. (2013) · Computers & Geosciences · doi:10.1016/j.cageo.2012.03.011 · Cited by 1,007
Recent progress on reservoir history matching: a review
Oliver, D. S., & Chen, Y. (2011) · Computational Geosciences · doi:10.1007/s10596-010-9194-2 · Cited by 804
An Iterative Ensemble Kalman Filter for Multiphase Fluid Flow Data Assimilation
Gu, Y., & Oliver, D. S. (2007) · SPE Journal · doi:10.2118/108438-pa · Cited by 332
Closed-Loop Reservoir Management
Jansen, J. D., Douma, S. D., Brouwer, D. R., Van den Hof, P. M. J., Bosgra, O. H., & Heemink, A. W. (2009) · SPE Reservoir Simulation Symposium · doi:10.2118/119098-ms · Cited by 308
Metadata
- Authors
- Skjervheim, J.-A., Evensen, G., Aanonsen, S. I., Ruud, B. O., & Johansen, T. A.
- Venue
- SPE Journal
- Publisher
- Society of Petroleum Engineers (SPE)
- Published
- 2007-09-19
- Volume
- 12
- Issue
- 03
- Pages
- 282-292
- ISSN
- 1086-055X (ISSN-L)
- 1930-0220
- OpenAlex
- W2012052869
- Cited by
- 217
- References
- 3
- FWCI
- 39.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.