The DOI matches its Crossref record.
Determination of Hydraulic Conductivity Using a Tension Infiltrometer
Abstract
A new procedure is presented for in situ determination of saturated and near‐saturated hydraulic conductivity [ K fs and K (ψ), respectively] from a sequence of steady infiltration measurements made at several tensions on a single infiltration surface. The method applies to tension infiltration from either a surface disk or from within a ring inserted a small distance into the soil. The analysis employs a modification of Wooding's solution for infiltration from a shallow pond, combined with numerically determined shape factors that account for the interaction effects between flow geometry and soil properties. The method is found, via numerical simulations, to have an overall accuracy within about ± 7%, regardless of whether the predicted K (ψ) function is flat with an indistinct air‐entry value, steep with a distinct air‐entry value, or very steep with no air‐entry value. Some important practical features of the method are that it does not require measurement of the often‐difficult square‐root‐of‐time infiltration behavior, no special considerations are required regarding the thickness of the contact layer, it minimizes the effect of local spatial heterogeneity by using only one infiltration surface per set of K (ψ) measurements, it avoids the use of potentially unstable simultaneous‐equations solution procedures, and it can be applied to tension infiltration from both disk and ring infiltrometers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Does biochar influence soil physical properties and soil water availability?
Hardie, M., Clothier, B., Bound, S., Oliver, G., & Close, D. (2014) · Plant and Soil · doi:10.1007/s11104-013-1980-x · Cited by 499
Characterization of soil quality: Physical and chemical criteria
Arshad, M. A., & Coen, G. M. (1992) · American Journal of Alternative Agriculture · doi:10.1017/s0889189300004410 · Cited by 386
Šimůnek, J., & van Genuchten, M. T. (1996) · Water Resources Research · doi:10.1029/96wr01525 · Cited by 301
Influence of soil, land use and climatic factors on the hydraulic conductivity of soil
Jarvis, N., Koestel, J., Messing, I., Moeys, J., & Lindahl, A. (2013) · Hydrology and Earth System Sciences · doi:10.5194/hess-17-5185-2013 · Cited by 285
Reynolds, W. D., Bowman, B. T., Brunke, R. R., Drury, C. F., & Tan, C. S. (2000) · Soil Science Society of America Journal · doi:10.2136/sssaj2000.642478x · Cited by 259
Self-citation
Metadata
- Authors
- Reynolds, W. D., & Elrick, D. E.
- Venue
- Soil Science Society of America Journal
- Publisher
- Wiley
- Published
- 1991-05
- Volume
- 55
- Issue
- 3
- Pages
- 633-639
- ISSN
- 0361-5995 (ISSN-L)
- 1435-0661
- OpenAlex
- W2090691909
- Cited by
- 400
- References
- 0
- FWCI
- 45.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Determination of Hydraulic Conductivity Using a Tension Infiltrometer. https://app.cochat.ai/papers/10.2136/sssaj1991.03615995005500030001x
- The paper
- Reynolds, W. D., & Elrick, D. E. (1991). Determination of Hydraulic Conductivity Using a Tension Infiltrometer. Soil Science Society of America Journal. https://doi.org/10.2136/sssaj1991.03615995005500030001x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.