The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Transient Flow from Tension Infiltrometers I. The Two‐Parameter Equation
Abstract
Tension disk infiltrometer experiments are generally conducted until apparent steady state is reached because most of the methods of analysis are based on Wooding's solution for steady state flux. However, the time necessary to reach steady state may be a penalizing aspect for soils with low permeability and the information contained in the transient stages is not utilized. Moreover, these methods assume homogeneous soil and a uniform initial water content, which may be unrealistic when a large volume of soil is sampled. In this series, we propose and compare several new methods of analysis that are based on the transient stage of axisymmetric infiltration. In the first part, we show that a two‐parameter equation—one term linear in square root of time and one term linear in time—adequately describes the transient flow from the disk infiltrometer for both simulated and laboratory tests. The technique used for the determination of the two coefficients must meet two criteria; it must verify the validity of the two‐term equation throughout the duration of the experiment, and it must account for the early‐time perturbation that is induced by the sand‐contact layer placed between the disk and the soil. We show that the best technique consists in linearizing the data by differentiating cumulative infiltration with respect to the square root of time. Direct nonlinear fitting on cumulative infiltration or infiltration flux is likely to lead to unacceptable errors, either because of the undetected invalidity of the two‐parameter equation or arising from the influence of the contact layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
Cited by
Beerkan Estimation of Soil Transfer Parameters through Infiltration Experiments—BEST
Lassabatère, L., Angulo-Jaramillo, R., Soria Ugalde, J. M., Cuenca, R., Braud, I., & Haverkamp, R. (2006) · Soil Science Society of America Journal · doi:10.2136/sssaj2005.0026 · Cited by 448
Field measurement of soil surface hydraulic properties by disc and ring infiltrometers
Angulo-Jaramillo, R., Vandervaere, J.-P., Roulier, S., Thony, J.-L., Gaudet, J.-P., & Vauclin, M. (2000) · Soil and Tillage Research · doi:10.1016/s0167-1987(00)00098-2 · Cited by 318
Self-citationRelations between soil hydraulic properties and burn severity
Moody, J. A., Ebel, B. A., Nyman, P., Martin, D. A., Stoof, C., & McKinley, R. (2016) · International Journal of Wildland Fire · doi:10.1071/wf14062 · Cited by 122
Metadata
- Authors
- Vandervaere, J.-P., Vauclin, M., & Elrick, D. E.
- Venue
- Soil Science Society of America Journal
- Publisher
- Wiley
- Published
- 2000-07
- Volume
- 64
- Issue
- 4
- Pages
- 1263-1272
- ISSN
- 0361-5995 (ISSN-L)
- 1435-0661
- OpenAlex
- W1995441414
- Cited by
- 191
- References
- 2
- FWCI
- 27.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.