The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Evaluating Interactions between Groundwater and Vadose Zone Using the HYDRUS‐Based Flow Package for MODFLOW
Abstract
In the past, vadose zone processes in groundwater flow models were dramatically simplified (or even neglected) due to constraints on computational resources. The one‐dimensional unsaturated flow package HYDRUS, recently developed for the groundwater model MODFLOW, was evaluated and compared with other contemporary modeling approaches used to characterize vadose zone effects in groundwater models. Being fully incorporated into the MODFLOW program, the HYDRUS package provides MODFLOW with recharge fluxes at the water table, while MODFLOW provides HYDRUS with the position of the groundwater table that is used as the bottom boundary condition in the package. The performance of the HYDRUS package was analyzed for three case studies of increasing complexity: (i) a one‐dimensional infiltration experiment; (ii) a two‐dimensional water table recharge experiment; and (iii) a hypothetical regional‐scale groundwater flow problem. The computational need and modeling efficiency of the HYDRUS package was compared with other relevant MODFLOW packages (VSF, UZF1, and REC‐ET). For smaller scale problems (up to two dimensions), the VSF process and the HYDRUS and UZF1 packages performed comparably well in terms of modeling efficiency and simulation times. Because of the high computational demand, it was not feasible to use the VSF process on a typical personal computer for the hypothetical large‐scale groundwater problem. The HYDRUS package provided a much more efficient alternative to VSF for this large‐scale groundwater problem and could better account for vadose zone processes than the UZF1 and REC‐ET packages. For large‐scale groundwater problems, the HYDRUS package provides an optimal tradeoff between computational effort and accuracy of model simulations for coupled vadose zone–groundwater problems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated Soils
van Genuchten, M. T. (1980) · Soil Science Society of America Journal · doi:10.2136/sssaj1980.03615995004400050002x · Cited by 27,578
Cited by
Development and Applications of the HYDRUS and STANMOD Software Packages and Related Codes
Šimůnek, J., van Genuchten, M. T., & Šejna, M. (2008) · Vadose Zone Journal · doi:10.2136/vzj2007.0077 · Cited by 1,281
Self-citationRecent Developments and Applications of the HYDRUS Computer Software Packages
Šimůnek, J., van Genuchten, M. T., & Šejna, M. (2016) · Vadose Zone Journal · doi:10.2136/vzj2016.04.0033 · Cited by 1,058
Self-citationNumerical Solution of Richards' Equation: A Review of Advances and Challenges
Farthing, M. W., & Ogden, F. L. (2017) · Soil Science Society of America Journal · doi:10.2136/sssaj2017.02.0058 · Cited by 412
Metadata
- Authors
- Twarakavi, N. K. C., Šimůnek, J., & Seo, S.
- Venue
- Vadose Zone Journal
- Publisher
- Wiley
- Published
- 2008-05
- Volume
- 7
- Issue
- 2
- Pages
- 757-768
- ISSN
- 1539-1663 (ISSN-L)
- OpenAlex
- W2124593651
- Cited by
- 178
- References
- 1
- FWCI
- 19.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.