The DOI matches its Crossref record.
A review of ADM1 extensions, applications, and analysis: 2002–2005
Abstract
Since publication of the Scientific and Technical Report (STR) describing the ADM1, the model has been extensively used, and analysed in both academic and practical applications. Adoption of the ADM1 in popular systems analysis tools such as the new wastewater benchmark (BSM2), and its use as a virtual industrial system can stimulate modelling of anaerobic processes by researchers and practitioners outside the core expertise of anaerobic processes. It has been used as a default structural element that allows researchers to concentrate on new extensions such as sulfate reduction, and new applications such as distributed parameter modelling of biofilms. The key limitations for anaerobic modelling originally identified in the STR were: (i) regulation of products from glucose fermentation, (ii) parameter values, and variability, and (iii) specific extensions. Parameter analysis has been widespread, and some detailed extensions have been developed (e.g., sulfate reduction). A verified extension that describes regulation of products from glucose fermentation is still limited, though there are promising fundamental approaches. This is a critical issue, given the current interest in renewable hydrogen production from carbohydrate-type waste. Critical analysis of the model has mainly focused on model structure reduction, hydrogen inhibition functions, and the default parameter set recommended in the STR. This default parameter set has largely been verified as a reasonable compromise, especially for wastewater sludge digestion. One criticism of note is that the ADM1 stoichiometry focuses on catabolism rather than anabolism. This means that inorganic carbon can be used unrealistically as a carbon source during some anabolic reactions. Advances and novel applications have also been made in the present issue, which focuses on the ADM1. These papers also explore a number of novel areas not originally envisaged in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Principles and potential of the anaerobic digestion of waste-activated sludge
Appels, L., Baeyens, J., Degrève, J., & Dewil, R. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2008.06.002 · Cited by 3,181
Total solids content drives high solid anaerobic digestion via mass transfer limitation
Abbassi-Guendouz, A., Brockmann, D., Trably, E., Dumas, C., Delgenès, J.-P., Steyer, J.-P., & Escudié, R. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.01.174 · Cited by 431
Self-citationCodigestion of solid wastes: A review of its uses and perspectives including modeling
Mata-Alvarez, J., Dosta, J., Macé, S., & Astals, S. (2011) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2010.525496 · Cited by 322
Microbiome modeling: a beginner's guide
Lange, E., Kranert, L., Krüger, J., Benndorf, D., & Heyer, R. (2024) · Frontiers in Microbiology · doi:10.3389/fmicb.2024.1368377 · Cited by 21
Metadata
- Authors
- Batstone, D. J., Keller, J., & Steyer, J. P.
- Venue
- Water Science and Technology
- Publisher
- IWA Publishing
- Published
- 2006-08-01
- Volume
- 54
- Issue
- 4
- Pages
- 1-10
- ISSN
- 0273-1223 (ISSN-L)
- 1996-9732
- OpenAlex
- W2072182444
- Cited by
- 162
- References
- 0
- FWCI
- 17.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of ADM1 extensions, applications, and analysis: 2002–2005. https://app.cochat.ai/papers/10.2166/wst.2006.520
- The paper
- Batstone, D. J., Keller, J., & Steyer, J. P. (2006). A review of ADM1 extensions, applications, and analysis: 2002–2005. Water Science and Technology. https://doi.org/10.2166/wst.2006.520
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.