The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
CFD simulation of an unbaffled stirred tank reactor driven by a magnetic rod: assessment of turbulence models
Open accessAbstract
A simulation of an unbaffled stirred tank reactor driven by a magnetic stirring rod was carried out in a moving reference frame. The free surface of unbaffled stirred tank was captured by Euler–Euler model coupled with the volume of fluid (VOF) method. The re-normalization group (RNG) k–ɛ model, large eddy simulation (LES) model and detached eddy simulation (DES) model were evaluated for simulating the flow field in the stirred tank. All turbulence models can reproduce the tangential velocity in an unbaffled stirred tank with a rotational speed of 150 rpm, 250 rpm and 400 rpm, respectively. Radial velocity is underpredicted by the three models. LES model and RNG k–ɛ model predict the better tangential velocity and axial velocity, respectively. RNG k–ɛ model is recommended for the simulation of the flow in an unbaffled stirred tank with magnetic rod due to its computational effort.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Therefore, in this physical problem, the accuracy of solving the turbulent eddy is the most important factor, so the gas flow in the Laval nozzle is considered to be the RNG k ε turbulent model [33], as shown in Equations ( 4) and ( 5).”
From Cold Spray Process for Co-Deposition of Copper and Aluminum Particles (2023) · cites this paper as [33]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Brucato, A., Ciofalo, M., Grisafi, F., & Micale, G. (1998) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00149-3 · Cited by 283
Numerical simulation of wavy falling film flow using VOF method
Gao, D., Morley, N. B., & Dhir, V. (2003) · Journal of Computational Physics · doi:10.1016/j.jcp.2003.07.013 · Cited by 182
Li, Y., Zhang, J., & Fan, L.-S. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00263-8 · Cited by 171
Turbulent flow in closed and free-surface unbaffled tanks stirred by radial impellers
Ciofalo, M., Brucato, A., Grisafi, F., & Torraca, N. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(96)00004-8 · Cited by 148
Large-eddy simulation of turbulent flow in an unbaffled stirred tank driven by a Rushton turbine
Alcamo, R., Micale, G., Grisafi, F., Brucato, A., & Ciofalo, M. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2004.11.017 · Cited by 147
Vortex flow generated by a magnetic stirrer
Halász, G., Gyüre, B., Jánosi, I. M., Szabó, K. G., & Tél, T. (2007) · American Journal of Physics · doi:10.1119/1.2772287 · Cited by 133
Ginzburg, I., & Wittum, G. (2001) · Journal of Computational Physics · doi:10.1006/jcph.2000.6655 · Cited by 122
Armenante, P. M., Luo, C., Chou, C., Fořt, I., & Medek, J. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00150-4 · Cited by 110
Effect of the shaft eccentricity on the hydrodynamics of unbaffled stirred tanks
Montante, G., Bakker, A., Paglianti, A., & Magelli, F. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2005.09.021 · Cited by 108
Kim, M. S., & Lee, W. I. (2003) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.553 · Cited by 102
Cited by
Effect of Agitator’s Types on the Hydrodynamic Flow in an Agitated Tank
Foukrach, M., Bouzit, M., Ameur, H., & Kamla, Y. (2020) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-020-00454-2 · Cited by 49
A solid-liquid mixing reactor based on swirling flow technology
Yang, Z., Holemans, T., Lagrain, B., Sels, B. F., & Vanierschot, M. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119054 · Cited by 23
Numerical Investigation and Estimating Correlation of Micromixing Performance of Coaxial Mixers
Liu, B., Sun, N., Jin, Z., Zhang, Y., & Sunden, B. A. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b04406 · Cited by 23
Study on the Numerical Model of Dense Solid Suspension Driven by a Coaxial Mixer
Xu, Z., Yang, C., Zhang, Z., Liu, B., & Jin, Z. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c06287 · Cited by 23
CFD Modeling of a Stirred Anaerobic Digestion Tank for Evaluating Energy Consumption through Mixing
Dabiri, S., Noorpoor, A., Arfaee, M., Kumar, P., & Rauch, W. A. (2021) · Water · doi:10.3390/w13121629 · Cited by 22
Hanspal, N. S., Chai, N., Allen, B. R., & Brown, D. A. R. (2020) · Journal of Industrial Microbiology & Biotechnology · doi:10.1007/s10295-020-02307-2 · Cited by 19
On the effect of biogas bubbles in anaerobic digester mixing
Dabiri, S., Kumar, P., Ebner, C., & Rauch, W. A. (2021) · Biochemical Engineering Journal · doi:10.1016/j.bej.2021.108088 · Cited by 19
Ramírez-Cruz, J., Salinas-Vázquez, M., Ascanio, G., Vicente, W., & Lagarza-Cortés, C. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115658 · Cited by 19
A novel ANN-CFD model for simulating flow in a vortex mixer
Sarkar, S., Singh, K. K., Kumar, K. S., Sreekumar, G., & Shenoy, K. T. (2022) · Chemical Engineering Science · doi:10.1016/j.ces.2022.117819 · Cited by 16
Jiang, H., Yuan, S., Liu, H., Li, W., & Zhou, X. (2022) · Science Progress · doi:10.1177/00368504211067200 · Cited by 8
Numerical investigation on the intensification of coaxial slurry mixing systems
Xu, Z., Yang, C., Wan, L., & Liu, B. (2023) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2023.109514 · Cited by 6
A draft tube to improve mixing in swirling flow-based solid–liquid mixing reactors
Yang, Z., Holemans, T., Lagrain, B., Sels, B. F., & Vanierschot, M. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2024.05.005 · Cited by 5
Determination of the just suspended speed for solid particle in torus reactor
Alouache, A., Selatnia, A., Lefkir, A., Halet, F., Sayah, H. E., & Nadjemi, B. (2019) · Water Science & Technology · doi:10.2166/wst.2019.245 · Cited by 5
Rotors with a novel structure for enhanced follow-up dynamic mixing
Wen, X., Ding, Y., Shi, M., Yan, H., Zuo, X., Yang, W., Yang, Y., & Ding, S. (2021) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2020-0205 · Cited by 4
Pukkella, A. K., & Subramanian, S. (2022) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24645 · Cited by 4
Cold Spray Process for Co-Deposition of Copper and Aluminum Particles
Hu, S., Li, H., Zhang, L., & Xu, Y. (2023) · Coatings · doi:10.3390/coatings13111953 · Cited by 3
Koçak, E. (2024) · International Journal of Energy Studies · doi:10.58559/ijes.1570736 · Cited by 3
Pai-Wechsung, S., Harris, J. M., Ali, F., Kolhe, P., & Badkar, A. V. (2026) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2026.104280 · Cited by 2
Tajik, A. R., Leventaki, E., Baena‐Moreno, F. M., Kugge, C., Bernin, D., Ström, H., & Sardina, G. (2025) · International Journal of Thermofluids · doi:10.1016/j.ijft.2025.101385 · Cited by 2
Study, development and improvement of MCM41-type MSN synthesis oriented to biomedical applications
Noguera, V. C. (2022) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/182386 · Cited by 2
Analysis of flow field in Si3N4 dry granulation chamber with non-standard composite structure
Jiang, Z., Ning, X., Duan, T., Wu, N., & Yu, D. (2020) · Journal of Computational Methods in Sciences and Engineering · doi:10.3233/jcm-204664
Advancing Fluid Mechanics Through Machine Learning: Case Studies and Computational InsightsPreprint
Aylı, E. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4627724
Advancing Fluid Mechanics Through Machine Learning: Case Studies and Computational InsightsPreprint
Aylı, E., & Koçak, E. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4835789
Flow Field Analysis of Agitated Displacement Tank for Cementing Equipment
Hou, L., Chen, C., Jiang, R., Ji, W., Lei, B., Zhang, M., & Huang, Y. (2025) · International Journal of Energy Technology and Policy · doi:10.1504/ijetp.2025.151789
Développement et propriétés de biofilms électroactifs en conditions hydrodynamiques contrôlées
Bouchon, F. (2023) · theses.fr (ABES) · doi:10.70675/c02ea152zac99z41d5zad00z7b5ed2d8113b
Wu, H. (2026) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York)
Hydrodynamic Selection of Polymorphic Assembly Pathways in Plant Protein Amyloid Fibrils
Xu, Z., Yang, P., Li, M., Cao, Z., Lan, T., Zhang, Y., Zhou, W., Jiang, L., & Sui, X. (2026) · Advanced Science · doi:10.1002/advs.78458
Metadata
- Authors
- Li, J., Deng, B., Zhang, B., Shen, X., & Kim, C. N.
- Affiliations
- University of Shanghai for Science and Technology (CN)
- Kyoto University (JP)
- Kyung Hee University (KR)
- Corresponding author
- Deng, Baoqing
- Venue
- Water Science and Technology
- Publisher
- IWA Publishing
- Published
- 2015-07-07
- Volume
- 72
- Issue
- 8
- Pages
- 1308-1318
- ISSN
- 0273-1223 (ISSN-L)
- 1996-9732
- OpenAlex
- W2266405170
- Cited by
- 24
- References
- 29
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 3 · 2023: 4 · 2022: 4 · 2021: 4 · 2020: 4 · 2019: 2
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- Water Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Shanghai Municipal Education Commission (14ZZ136)
- Japan Society for the Promotion of Science (26420870)
- Topics
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Fluid Dynamics and Mixing
- Physical Sciences › Engineering › Computational Mechanics › Fluid Dynamics and Turbulent Flows
- Physical Sciences › Engineering › Civil and Structural Engineering › Hydraulic flow and structures
- Keywords
- unbaffled stirred tank, magnetic stirring, turbulence model evaluation, RNG k-epsilon turbulence model, large eddy simulation, detached eddy simulation, two-fluid model, volume of fluid method, moving reference frame, free surface flow, tangential velocity, radial velocity
- MeSH terms
- Computer Simulation, Magnetics, Models, Theoretical, Bioreactors
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.