CoChat

Life-cycle analysis of energy use, greenhouse gas emissions, and water consumption in the 2016 MYPP algal biofuel scenarios

Open access
Argonne National Lab. (ANL), Argonne, IL (United States), Frank, Edward, USDOE Office of Energy Efficiency and Renewable Energy (EERE), Bioenergy Technologies Office (EE-3B), Pegallapati, Ambica, Davis, Ryan, Markham, Jennifer, Coleman, Andre, Jones, Sue, Wigmosta, Mark, Zhu, Yunhua · 2016

The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index; none of the 7 sources its claims cite is checked for support yet.

Abstract

The Department of Energy (DOE) Bioenergy Technologies Office (BETO) Multi-year Program Plan (MYPP) describes the bioenergy objectives pursued by BETO, the strategies for achieving those objectives, the current state of technology (SOT), and a number of design cases that explore cost and operational performance required to advance the SOT towards middle and long term goals (MYPP, 2016). Two options for converting algae to biofuel intermediates were considered in the MYPP, namely algal biofuel production via lipid extraction and algal biofuel production by thermal processing. The first option, lipid extraction, is represented by the Combined Algae Processing (CAP) pathway in which algae are hydrolyzed in a weak acid pretreatment step. The treated slurry is fermented for ethanol production from sugars. The fermentation stillage contains most of the lipids from the original biomass, which are recovered through wet solvent extraction. The process residuals after lipid extraction, which contain much of the original mass of amino acids and proteins, are directed to anaerobic digestion (AD) for biogas production and recycle of N and P nutrients. The second option, thermal processing, comprises direct hydrothermal liquefaction (HTL) of the wet biomass, separation of aqueous, gas, and oil phases, and treatment of the aqueous phase with catalytic hydrothermal gasification (CHG) to produce biogas and to recover N and P nutrients. The present report describes a life cycle analysis of energy use and greenhouse gas (GHG) emissions of the CAP and HTL options for the three scenarios just described. Water use is also reported. Water use during algal biofuel production comes from evaporation during cultivation, discharge to bleed streams to control pond salinity (“blowdown”), and from use during preprocessing and upgrading. For scenarios considered to date, most water use was from evaporation and, secondarily, from bleed streams. Other use was relatively small at the level of fidelity being modeled now.

Overview

CoChat Summary

## TL;DR

This technical report presents a life-cycle analysis of energy use, greenhouse gas emissions, and water consumption for two algal biofuel conversion pathways in the 2016 DOE BETO MYPP: Combined Algae Processing (CAP) and hydrothermal liquefaction (HTL). It focuses on three MYPP scenarios and notes that, for the scenarios considered, most water use came from cultivation evaporation, with bleed streams as the second-largest source.

## Key findings

  • The report analyzes two conversion options for algae to biofuel intermediates: lipid extraction via CAP and thermal processing via HTL.
  • It covers three MYPP scenarios and reports life-cycle energy use, GHG emissions, and water use for the CAP and HTL options.
  • The text states that, for the scenarios considered to date, most water use was from evaporation, and secondarily from bleed streams used to control pond salinity.
  • The report notes that other water uses during preprocessing and upgrading were relatively small at the model fidelity used.

## Methods

  • Design: Life-cycle analysis comparing CAP and HTL pathways described in the 2016 DOE BETO MYPP.
  • Data/sample: Three MYPP scenarios; the text does not provide the numerical scenario inputs in the excerpt.
  • Main analysis: Life-cycle assessment of energy use and GHG emissions, with water use also reported; process descriptions include CAP steps (hydrolysis, fermentation, wet solvent extraction, anaerobic digestion) and HTL/CHG steps (hydrothermal liquefaction, phase separation, catalytic hydrothermal gasification).

## Limitations

  • The text says the water-use results are at the “level of fidelity being modeled now,” indicating limited model resolution; this is stated in the paper.
  • The excerpt does not provide numerical results for energy, emissions, or water use; this limits what can be extracted from the provided text. This limitation is evident from the text.
  • The excerpt does not describe uncertainty analysis, validation, or sensitivity analysis; this is not stated in the paper excerpt.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.2172/1281137

Cites

11 of 11 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 1 Not valid · 8 Not checked · 4 Own results and interpretations

7 references still to check

A free account verifies the references that are still open.

Verify all 7 references — free account
  • Borderline: one of the tests for a substantial claim is unclear. 1
  • It may state two separate claims as one. 3
  • Probably not a substantial claim. 11
  • The quote only partly states this claim. 3

Create a free account to see these claims.

Citations

Cites

Show all 11 references

Cited by

Metadata

Authors
Argonne National Lab. (ANL), A., Frank, E., USDOE Office of Energy Efficiency and Renewable Energy (EERE), B. T. O. (.-3., Pegallapati, A., Davis, R., Markham, J., Coleman, A., Jones, S., Wigmosta, M., & Zhu, Y.
Affiliations
  • Argonne National Laboratory (US)
  • National Laboratory of the Rockies (US)
  • Pacific Northwest National Laboratory (US)
Published
2016-06-16
OpenAlex
W2526792001
Cited by
10
References
11
Citations by year
2023: 2 · 2021: 2 · 2020: 2 · 2019: 1 · 2018: 2 · 2017: 1
Type
report
Language
en
Open access
Locations
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
  • USDOE Office of Energy Efficiency and Renewable Energy (EERE), Bioenergy Technologies Office (EE-3B)
  • DOE (AC02-06CH11357)
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Algal biology and biofuel production
  • Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Bioenergy crop production and management
Keywords
algal biofuels, life cycle assessment, greenhouse gas emissions, energy consumption, water consumption, hydrothermal liquefaction, catalytic hydrothermal gasification, anaerobic digestion, biogas, nutrient cycling, lipid extraction, alcoholic fermentation, windthrow, algae cultivation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.