The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
A white paper describing produced water from production of crude oil, natural gas, and coal bed methane.
Open accessAbstract
One of the key missions of the U.S. Department of Energy (DOE) is to ensure an abundant and affordable energy supply for the nation. As part of the process of producing oil and natural gas, operators also must manage large quantities of water that are found in the same underground formations. The quantity of this water, known as produced water, generated each year is so large that it represents a significant component in the cost of producing oil and gas. Produced water is water trapped in underground formations that is brought to the surface along with oil or gas. It is by far the largest volume byproduct or waste stream associated with oil and gas production. Management of produced water presents challenges and costs to operators. This white paper is intended to provide basic information on many aspects of produced water, including its constituents, how much of it is generated, how it is managed and regulated in different settings, and the cost of its management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khatib, Z., & Verbeek, P. (2003) · Journal of Petroleum Technology · doi:10.2118/0103-0026-jpt · Cited by 165
A Comprehensive Determination of Produced Water Composition
Tibbetts, P. J. C., Buchanan, I. T., Gawel, L. J., & Large, R. (1992) · Springer eBooks · doi:10.1007/978-1-4615-2902-6_9 · Cited by 134
Janks, J. S., & Cadena, F. (1992) · Springer eBooks · doi:10.1007/978-1-4615-2902-6_37 · Cited by 31
Design and Construction of Pilot Wetlands for Produced-Water Treatment
Jackson, L. M., & Myers, J. E. (2003) · SPE Annual Technical Conference and Exhibition · doi:10.2118/84587-ms · Cited by 25
Initial Design Considerations for a Cost Effective Treatment of Stripper Oil Well Produced Water
Adewumi, M. A., Erb, J. E., & Watson, R. W. (1992) · Springer eBooks · doi:10.1007/978-1-4615-2902-6_40 · Cited by 15
Cited by
Review of technologies for oil and gas produced water treatment
Fakhru’l-Razi, A., Pendashteh, A., Abdullah, L. C., Biak, D. R. A., Madaeni, S. S., & Abidin, Z. Z. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.05.044 · Cited by 2,250
Water purification by membranes: The role of polymer science
Geise, G. M., Lee, H., Miller, D. J., Freeman, B. D., McGrath, J. E., & Paul, D. R. (2010) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22037 · Cited by 972
Water Management Challenges Associated with the Production of Shale Gas by Hydraulic Fracturing
Gregory, K. B., Vidic, R. D., & Dzombak, D. A. (2011) · Elements · doi:10.2113/gselements.7.3.181 · Cited by 893
Produced water treatment technologies
Igunnu, E. T., & Chen, G. Z. (2014) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/cts049 · Cited by 804
Produced water characteristics, treatment and reuse: A review
Al-Ghouti, M. A., Al-Kaabi, M. A., Ashfaq, M. Y., & Da’na, D. A. (2019) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.02.001 · Cited by 690
Metadata
- Authors
- Veil, J. A., Puder, M. G., Elcock, D., & Redweik, R. J., Jr.
- Published
- 2004-02-16
- OpenAlex
- W2134455893
- Cited by
- 686
- References
- 5
- Type
- report
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.