Fluorosurfactants in Enhanced Oil Recovery
The DOI matches its Crossref record; 9 of the 20 references it cites were found in a registry or an index.
Abstract
Fluorosurfactants are effective in a variety of Enhanced Oil Recovery (EOR) techniques including (i) improv- ing subterranean wetting, (ii) increasing foam stability, and (iii) modifying the surface properties of the reservoir forma- tion. While fluorosurfactants have been used in gas and oil exploration for four decades, the increased demand for petro- leum and the greater understanding of the benefits of fluorosurfactants have led to growing acceptance for fluorosurfac- tants throughout the petroleum industry. This mini-review summarizes the published research for fluorosurfactants in EOR from 1977 to 2007. The references in this mini-review are mostly patents (vs peer reviewed articles) and laboratory models of the benefits of fluorosurfactants in EOR (vs actual oil and gas recovery experiments). This summary of the pub- lished reports on fluorosurfactants in EOR provides petroleum scientists and engineers an overview of this emerging tech- nology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“According to Paul et al. [123] and Prevedouros et al. [64], over 95% of PFAS emissions are discharged into aquatic environments, with less than 5% released into the atmosphere.”
From Industrial Applications, Environmental Fate, Human Exposure, and Health Effects of PFAS (2025) · cites this paper as [64]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Foams: Fundamentals and Applications in the Petroleum Industry
(1994) · Advances in Chemistry · doi:10.1021/ba-1994-0242 · Cited by 473 · cited 1×
“com polymers, surfactants, foaming agents, acids, alkalines, and solvents [5].”
Surfactants: Fundamentals and Applications in the Petroleum Industry
Shosa, J. D., & Schramm, L. L. (2001) · PALAIOS · doi:10.2307/3515635 · Cited by 461
Fluorinated surfactants : synthesis, properties, applications
Kissa, E. (1994) · M. Dekker eBooks · Cited by 272
Have we run out of oil yet? Oil peaking analysis from an optimist's perspective
Greene, D. L., Hopson, J. L., & Li, J. (2006) · Energy Policy · doi:10.1016/j.enpol.2005.11.025 · Cited by 202 · cited 1×
“While estimates vary, the peaking of worldwide conventional oil production is a serious concern that has perhaps already taken place or will occur within the next few decades [2].”
Surfactants: Fundamentals and Applications in the Petroleum Industry
SHOSA, J. D. (2001) · PALAIOS · doi:10.1669/0883-1351(2001)016<0615:brsfaa>2.0.co;2 · Cited by 168
Wettability Alteration to Intermediate Gas-Wetting in Porous Media at Elevated Temperatures
Tang, G., & Firoozabadi, A. (2003) · Transport in Porous Media · doi:10.1023/a:1023579706686 · Cited by 99 · cited 1×
“Polymeric fluorosilane surfactants were used to durably alter the surface properties of three wettability states of Berea sandstone (water-wet, weakly water-wet, weakly oil-wet) to intermediate gas-wetting [24].”
Effect of surfactant structure on foam–oil interactions
Vikingstad, A. K., Aarra, M. G., & Skauge, A. (2006) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.12.047 · Cited by 78 · cited 1×
“…characteristics of either (i) an amphoteric fluorosurfactant or (ii) a C14-C16 sulfonate (AOS) formulation showed that only the fluorosurfactant had negative spreading coefficients for all crude oils tested, which explained the consistent stability of these foams in the presence of the oils [18].”
Applications of Surfactants in Petroleum Industry
Bhardwaj, A., & Hartland, S. (1993) · Journal of Dispersion Science and Technology · doi:10.1080/01932699308943389 · Cited by 47
Water-Soluble Fluorochemical Surfactant Well Stimulation Additives
Clark, H. B., Pike, M. T., & Rengel, G. L. (1982) · Journal of Petroleum Technology · doi:10.2118/9008-pa · Cited by 16
Research works printed but not linked: 2
- [3][3] J. Kanicky, J. Lopez-Montilla, S. Pandey, and D. Shah, 'Surface Chemistry in the Petroleum Industry', in Handbook of applied surface and colloid chemistry , John Wiley & Sons, 2002, pp. 251-267. -
- [25][25] B. Adabhatla, K. Mohanty, P. Berger, and C. Lee, 'Effect of surfactants on wettability of near-wellborne regions of gas reservoirs', J. Petrol. Sci. Eng. , vol. 52, pp. 227-236, June 2006. © Murphy and Hewat; Licensee Bentham Open . This is an open access article licensed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0/) which permits unrestricted, non-commercial use, distribution and reproduction in any medium, provided the work is properly cited.
Cited by
Historical and current usage of per- and polyfluoroalkyl substances (PFAS): A literature review
Gaines, L. G. T. (2023) · American Journal of Industrial Medicine · doi:10.1002/ajim.23362 · Cited by 665
Chemistry, Properties, and Uses of Commercial Fluorinated Surfactants
Buck, R. C., Murphy, P. M., & Pabon, M. (2011) · The handbook of environmental chemistry · doi:10.1007/978-3-642-21872-9_1 · Cited by 141
Self-citationDou, J., Liu, J., Wang, Y., Zhi, L., Shen, J., & Wang, G. (2023) · Molecules · doi:10.3390/molecules28207151 · Cited by 137
“First, N , N (cid:48) -dimethyl-1,3-propyldiamine (5.2 g) and triethylamine (5.0 g) in 50 mL of ether were added into a 250 mL three-necked flask, followed by the gradual dropwise addition of PFPF (19.5 g) over a time period of 1–2 h under ice-bath conditions (0 ◦ C).”
MethodInfluentialFluorinated surfactants: A review on recent progress on synthesis and oilfield applications
Hussain, S. M. S., Adewunmi, A. A., Mahboob, A., Murtaza, M., Zhou, X., & Kamal, M. S. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2022.102634 · Cited by 121
Information Requirements under the Essential-Use Concept: PFAS Case Studies
Glüge, J., London, R., Cousins, I. T., DeWitt, J., Goldenman, G., Herzke, D., Lohmann, R., Miller, M., Ng, C. A., Patton, S., et al. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.1c03732 · Cited by 101
Metadata
- Authors
- Murphy, P. M., & Hewat, T.
- Venue
- The Open Petroleum Engineering Journal
- Publisher
- Bentham Science Publishers Ltd.
- Published
- 2008-11-17
- Volume
- 1
- Issue
- 1
- Pages
- 58-61
- ISSN
- 1874-8341 (ISSN-L)
- OpenAlex
- W2007151918
- Cited by
- 31
- References
- 20
- Citations by year
- 2026: 7 · 2025: 2 · 2024: 3 · 2023: 2 · 2022: 4 · 2021: 4 · 2018: 1 · 2017: 1 · 2016: 2 · 2014: 4
- FWCI
- 0.78
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Open Petroleum Engineering Journal (publishedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Enhanced Oil Recovery Techniques
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surfactants and Colloidal Systems
- Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
- Keywords
- fluorosurfactants, enhanced oil recovery, foam stability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fluorosurfactants in Enhanced Oil Recovery. https://app.cochat.ai/papers/10.2174/1874834100801010058
- The paper
- Murphy, P. M., & Hewat, T. (2008). Fluorosurfactants in Enhanced Oil Recovery. The Open Petroleum Engineering Journal. https://doi.org/10.2174/1874834100801010058
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.