The Effect of Ageing on the Mechanical Properties of Eastern White Pine
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In [12,28] no shear strength variation was reported comparing new and old specimens of respectively 120 and 270 years, while Attar-Hassan reported a shear strength increase of about 17%.
“In [12,28] no shear strength variation was reported comparing new and old specimens of respectively 120 and 270 years, while Attar-Hassan [55] reported a shear strength increase of about 17%.”
From A review on the mechanical properties of aged wood and salvaged timber (2016) · cites this paper as [55]
Attar-Hassan reports a clear tensile strength reduction of about 29%, observed while testing small clear specimens.
“Only Attar-Hassan [55] reports a clear tensile strength reduction of about 29%, observed while testing small clear specimens.”
From A review on the mechanical properties of aged wood and salvaged timber (2016) · cites this paper as [55]
The other analyzed researches reported no compressive strength variation [12][13][14][15]36], a slight increase [11,55,61] or a significant compressive strength increase [62,63].
“The other analyzed researches reported no compressive strength variation [12][13][14][15]36],a slight increase [11,55,61] or a significant compressive strength increase [62,63].”
From A review on the mechanical properties of aged wood and salvaged timber (2016) · cites this paper as [55]
The lower MOR and higher MOE of CLST may be attributable to the greater number of finger joints necessitated by the shorter length of the secondary timber boards, and greater stiffness and brittleness may also be an effect of ageing.
“The lower MOR and higher MOE of CLST may be attributable to the greater number of finger joints necessitated by the shorter length of the secondary timber boards; however, greater stiffness and brittleness may also be an effect of ageing [87] and requires further investigation.”
From Cross-Laminated Secondary Timber: Experimental Testing and Modelling the Effect of Defects and Reduced Feedstock Properties (2018) · cites this paper as [87]
Cited by
Sorted by citations
A review on the mechanical properties of aged wood and salvaged timber
Cavalli, A., Cibecchini, D., Togni, M., & Sousa, H. S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.001 · Cited by 155 · see citing works
Rose, C. M., Bergsagel, D., Dufresne, T., Unubreme, E., Lyu, T., Duffour, P., & Stegemann, J. A. (2018) · Sustainability · doi:10.3390/su10114118 · Cited by 68 · see citing works
“The lower MOR and higher MOE of CLST may be attributable to the greater number of finger joints necessitated by the shorter length of the secondary timber boards; however, greater stiffness and brittleness may also be an effect of ageing [87] and requires further investigation.”
BackgroundXin, Z., Fu, R., Zong, Y., Ke, D., Zhang, H., Yu, Y., & Zhang, W. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129476 · Cited by 26 · see citing works
Feasibility of cross-laminated secondary timber
University College London, U., Rose, C., Stegemann, J., & University College London, U. (2019) · Sustainable Construction Materials and Technologies (SCMT) · doi:10.18552/2019/idscmt5053 · Cited by 2 · see citing works
- Authors
- Attar-Hassan, G.
- Corresponding author
- Attar-Hassan, G.
- Venue
- Bulletin of the Association for Preservation Technology
- Publisher
- JSTOR
- Published
- 1976
- Volume
- 8
- Issue
- 3
- Pages
- 64
- ISSN
- 0044-9466 (ISSN-L)
- OpenAlex
- W2798059774
- Cited by
- 18
- References
- 0
- Citations by year
- 2025: 3 · 2024: 2 · 2022: 2 · 2021: 2 · 2020: 1 · 2019: 1 · 2018: 1 · 2017: 1 · 2016: 2 · 2015: 1 · 2014: 1 · 2013: 1
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Bulletin of the Association for Preservation Technology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Bamboo properties and applications
- Physical Sciences › Engineering › Civil and Structural Engineering › Civil and Structural Engineering Research
- Keywords
- Pinus strobus, wood aging, mechanical properties, wood durability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
