The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Microstructure and Properties of Al0.5CoCrCuFeNiTix (x=0–2.0) High-Entropy Alloys
Open accessAbstract
High-entropy Al 0:5 CoCrCuFeNiTi x alloys are synthesized using the well-developed arc-melting and casting method.The molar ratio (x) of titanium is varied from 0 to 2.0.The microstructure, hardness and wear resistance of the alloys are investigated.The alloys exhibit simple FCC, BCC, CoCr-like and Ti 2 Ni-like phases.For a small addition of titanium, the alloys form a monolithic FCC solid-solution phase.Two phases of 1 and 2 based on BCC appear at the titanium content of x ¼ 0:4 and the 1 phase becomes ordered at x ¼ 1:4.With the increase of titanium content, copper segregates to the interdendrite region in which nano-precipitates form.A CoCr-like phase forms when x ranges from 0.8 to 1.2.Ti 2 Ni-like phase forms when the titanium content exceeds x ¼ 1:0.The hardness value increases with titanium content.The alloys with lower titanium content exhibit similar wear resistance to Al 0:5 CoCrCuFeNi.The wear resistance is rapidly improved at titanium contents from 0.6 to 1.0, and reaches a maximum at x ¼ 1:0.This is followed by a gradual decrease with further increase of the titanium.The mechanisms behind the strengthening and wear resistance of the alloys are discussed.[
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Self-citation
Cited by
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Self-citationHigh-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Self-citationHigh-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Guo, S., Hu, Q., Ng, C., & Liu, C. T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.05.002 · Cited by 800
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Mapping the world of complex concentrated alloys
Gorsse, S., Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.027 · Cited by 432
Gorr, B., Azim, M., Christ, H.-J., Mueller, T., Schliephake, D., & Heilmaier, M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.012 · Cited by 386
Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys
Hsu, C.-Y., Sheu, T.-S., Yeh, J.-W., & Chen, S.-K. (2010) · Wear · doi:10.1016/j.wear.2009.10.013 · Cited by 383
Self-citationLi, D., & Zhang, Y. (2016) · Intermetallics · doi:10.1016/j.intermet.2015.11.002 · Cited by 346
Dong, Y., Lu, Y., Jiang, L., Wang, T., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.04.001 · Cited by 330
Database on the mechanical properties of high entropy alloys and complex concentrated alloys
Gorsse, S., Nguyen, M. H., Senkov, O. N., & Miracle, D. B. (2018) · Data in Brief · doi:10.1016/j.dib.2018.11.111 · Cited by 322
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 322
The structure and properties of high-entropy alloys and nitride coatings based on them
Pogrebnjak, A. D., Bagdasaryan, A. A., Yakushchenko, I. V., & Beresnev, V. M. (2014) · Russian Chemical Reviews · doi:10.1070/rc2014v083n11abeh004407 · Cited by 320
Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy
Dong, Y., Zhou, K., Lu, Y., Gao, X., Wang, T., & Li, T. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.12.048 · Cited by 316
Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy
Tsai, C.-W., Tsai, M.-H., Yeh, J.-W., & Yang, C.-C. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.10.088 · Cited by 293
Self-citationMicrostructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys
Xiao, D. H., Zhou, P. F., Wu, W. Q., Diao, H. Y., Gao, M. C., Song, M., & Liaw, P. K. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.036 · Cited by 266
Metadata
- Authors
- Chen, M.-R., Lin, S.-J., Yeh, J.-W., Chen, S.-K., Huang, Y.-S., & Tu, C.-P.
- Venue
- MATERIALS TRANSACTIONS
- Publisher
- Japan Institute of Metals
- Published
- 2006
- Volume
- 47
- Issue
- 5
- Pages
- 1395-1401
- ISSN
- 1345-9678 (ISSN-L)
- 1347-5320
- OpenAlex
- W2145625156
- Cited by
- 194
- References
- 1
- FWCI
- 8.61
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.