The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index; none of the 5 sources its claims cite is checked for support yet.
Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet
Open accessAbstract
Non-impact printing is gaining wider acceptance in the printing world, with one of the rapid growing applications being fine art color printing technology. With the right amount of artist's imagination and combination of the right substrate and ink, it is possible to create a piece of art work that will last for a long time.This study includes a comprehensive look into ink/substrate combinations. The choice of proper substrate and coating, ink jet inks, together with some form of protection for ink jet printouts, is discussed here. Substrates with special ink jet receptive layers, with and without optical brightening agents (OBAs), were chosen for this work. The correlation between substrate's characteristics and final print performance was investigated. Ink stability of prints with time was observed and lightfastness tests were performed in order to evaluate the stability of printed color patches on specific substrates. A special UV coating was applied to study its protection level. Results of accelerated lightfastness tests for the different substrates are interpreted in terms of change of color gamut volumes and ΔE.
Overview
CoChat Summary
TL;DR
This study evaluates how optical brightening agents (OBAs) and a UV protective coating affect color gamut and lightfastness of pigmented ink jet prints on fine art substrates. It finds no correlation between substrate brightness/whiteness and gamut volume, and the tested UV coating did not provide the claimed protection.
Key findings
- No correlation was found between optical properties (brightness, whiteness, opacity) and achievable color gamut; OBA-free substrates were capable of larger gamut volumes than OBA-containing substrates. The highest initial gamut volume was Hahnemühle Photo Rag (460,752), followed by Arches Infinity smooth (439,721) and Sterling Rag Platinum (433,931), the latter two OBA-free.
- After 48 h xenon fading (129,600 kJ/m², about 4.5 months of June daylight in Florida), all gamut volumes decreased. The smallest gamut-volume loss was Hahnemühle Photo Rag (2%), Sterling Rag Platinum (6%), Somerset Velvet smooth (7%), and Arches Infinity textured (7%); the largest loss was Brilliance Chromata White (32%, ΔE 13.9). The smallest ΔE was Sterling Rag Platinum (3.1), Arches Infinity smooth (4.5), and Hahnemühle Photo Rag (4.8).
- The UV protective coating on Sterling I did not show claimed protection: uncoated gamut changed from 417,193 to 359,814 (loss 57,379; 14%; ΔE 4.8), while coated changed from 415,864 to 347,671 (loss 68,193; 16%; ΔE 8.2). The coating also shifted the gamut boundary toward lower L values.
- Ink/substrate combinations reached constant values about 6 hours after printing, so color-stability testing should start at least 6–12 hours after printing.
Methods
- High-end fine art ink jet coated papers and canvases (100% cotton, with and without OBA) were printed with an Epson Stylus PRO 4000 using Epson UltraChrome pigment inks, PowerRIP X, 1440 dpi, and Premium glossy photo paper media setting; no color management was used for ICC profiling.
- Lab values were measured with a spectrophotometer. The ECI 2002R chart was printed on two substrates and measured at 0, 1, 2, 3, 6, 18, 24, and 48 h to assess ink stability; the ECI 2002 Random CMYK chart was printed on all substrates, and gamut volumes were calculated from ICC profiles. PPS porosity, roughness, permeability, TAPPI brightness, TAPPI opacity, and CIE whiteness were also measured.
- Fading used a Suntest CPS+ tabletop xenon exposure system with an 1100 W air-cooled xenon arc lamp, 129,600 kJ/m² over 48 h at 765 W/m², uncoated quartz glass filter, and 70°C chamber temperature. A UV coating was applied to one OBA substrate (Sterling I) with a foam roller or spraying system.
Limitations
- No explicit limitations section is stated in the paper.
- Evident from the text: the UV coating was tested on only one substrate (Sterling I), so coating conclusions are not generalizable across the other papers or canvases.
- Evident from the text: lightfastness was assessed with one accelerated xenon-arc condition and no real-time outdoor validation; OBA presence/absence was inferred from spectral peaks and optical measurements rather than chemical quantification.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 0 Not valid · 4 Not checked · 26 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In terms of the least loss of color data, again the OBAfree substrates showed the best lightfastness performance.”
§ Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet > Conclusions
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Unexpectedly, the one of the substrates, Hahnemühle Photo Rag, that does not claim no OBA presence, and thus suggested to be an OBA paper, did not show presence of brighteners based on the spectral data.”
§ Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet > Experimental
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The ink/substrate combinations reach constant values about 6 hours after outputting the prints.”
§ Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet > Experimental
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“After submission to radiation, the gamut volumes decreased for all the samples as seen from the figures 1 and 2 and table 3.”
§ Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet > Discussion
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“As seen from figures 1 and 2, the highest gamut volume number was achieved using Hahnemühle Photo Rag (OBA), followed by Arches Infinity smooth (OBA-free) and Sterling Rag Platinum (OBA-free) substrate, respectively (Table 3).”
§ Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet > Discussion
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
11 more claims
Create a free account to see all 30 claims and every source verdict.
- Probably not a substantial claim. 4
- It may state two separate claims as one. 12
Citations
Cites
Handbook of print media: technologies and production methods
(2002) · Choice Reviews Online · doi:10.5860/choice.39-3175 · Cited by 355
McCormick-Goodhart, M. H., Wilhelm, H., & Brower, C. (1996) · Journal of the American Institute for Conservation · doi:10.2307/3179943 · Cited by 23
Color and Lightfastness Performance of Different Epson Ink Sets
Chovancova, V., Fleming, P. D., Howell, P., & Rasmusson, A. (2005) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.2005.49.6.art00015 · Cited by 17
Self-citationWilhelm, H. (2004) · Cited by 11
An Investigation into papers for digital printing
Evans, M. A., & LeMaire, B. (2006) · RIT Scholar Works (Rochester Institute of Technology) · Cited by 6
Evaluation of Dye and Pigment Based Ink Jet Ink Sets
Chovancova, V. (2005) · ScholarWorks - WMU (Western Michigan University) · Cited by 2
Wilhelm, H. (2004) · NIP & Digital Fabrication Conference · doi:10.2352/issn.2169-4451.2004.20.1.art00033_2
Fine Art Papers for Ink Jet Printing
Bair, R. L. (2004) · NIP & Digital Fabrication Conference · doi:10.2352/issn.2169-4451.2004.20.1.art00095_2
Research works printed but not linked: 5
- B. W. Crouse and G. H. Snow, "Fluorescent Whitening Agents in the Paper Industry. Their Chemistry and Measurement", TAPPI J. 64(7), 87-89 (1981).
- V. Chovancova-Lovell, et al., "New in the Pressroom: Color Management -The Coating Formulator's New Opportunity", Panel Discussion at TAPPI 06 Coating and Graphic Arts Conference, Atlanta, 2006.
- V. Chovancova-Lovell and P. D. Fleming III, "Color Gamut -New Tool in the Pressroom?", submitted to TAPPI Journal.
- E. Hrehorova, A. Sharma, P. D. Fleming III, " Color Reproduction Studies in RGB and CMYK Workflow Using Inkjet Printer Drivers and RIPs", Proc. of TAGA 58th Annual Technical Conference, 2006, Vancouver, BC, Canada.
- L. Pal, M. K. Joyce, P. D. Fleming III, "A Simple Method for Calculation of the Permeability Coefficient of Porous Media", TAPPI Journal, August 2006. 14. CIE 15:2004, Colorimetry, Third Edition, 2004.
Cited by
Effects of Paper Manufacturing Factors on Inkjet Print Quality and Lightfastness
Pal, L., Agate, S., & Fleming, P. D. (2007) · Technical programs and proceedings/Technical program and proceedings · doi:10.2352/issn.2169-4451.2007.23.1.art00058_2 · Cited by 9
Self-citationThe effect of substrate properties on print attributes for gravure printing--From proof to press
Wu, Y. (2008) · ScholarWorks - WMU (Western Michigan University) · Cited by 7
Lovell, V. (2006) · ScholarWorks - WMU (Western Michigan University) · Cited by 3
Stability of wide format ink jet prints for outdoor application
Sinđić, I., Mirković, I. B., & Bolanča, Z. (2015) · Tehnicki vjesnik - Technical Gazette · doi:10.17559/tv-20141225184056 · Cited by 1
Metadata
- Authors
- Chovancova-Lovell, V., & Fleming, P. D.
- Affiliations
- Western Michigan University (US)
- ORCID
- Fleming, Paul D.
- Venue
- NIP & Digital Fabrication Conference
- Published
- 2006-01-01
- Volume
- 22
- Issue
- 1
- Pages
- 227-230
- ISSN
- 2169-4362 (ISSN-L)
- 2169-4451
- OpenAlex
- W2565750916
- Cited by
- 4
- References
- 8
- Citations by year
- 2015: 1
- FWCI
- 4.18
- Type
- conference paper
- Language
- en
- Open access
- bronze
- dx.doi.org
- Locations
- Technical programs and proceedings/Technical program and proceedings (publishedVersion)
- Funders
- National Science Foundation (0215356)
- Topics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Color Science and Applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Material Properties and Processing
- Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
- Keywords
- optical brightening agents, UV-protective coatings, inkjet printing, light fastness, inkjet ink, color gamut, color difference, non-impact printing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-14, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-14 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet. https://app.cochat.ai/papers/10.2352/issn.2169-4451.2006.22.1.art00058_1
- The paper
- Chovancova-Lovell, V., & Fleming, P. D. (2006). Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet. NIP & Digital Fabrication Conference. https://doi.org/10.2352/issn.2169-4451.2006.22.1.art00058_1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.