Effectiveness Analysis of Rolling Bearing Fault Detectors Based On Self-Organising Kohonen Neural Network – A Case Study of PMSM Drive
Open accessThe DOI matches its Crossref record; 21 of the 22 references it cites were found in a registry or an index.
Abstract
Due to their many advantages, permanent magnet synchronous motors (PMSMs) are increasingly used in not only industrial drive systems but also electric and hybrid vehicle drives, aviation and other applications. Unfortunately, PMSMs are not free from damage that occurs during their operation. It is assumed that about 40% of the damage that occurs is related to rolling bearing damage. This article focuses on the use of Kohonen neural network (KNN) for rolling bearing damage detection in a PMSM drive system. The symptoms from the fast Fourier transform (FFT) and Envelope (ENV) Analysis of the mechanical vibration acceleration signal were analysed. The signal ENV was obtained by applying the Hilbert transform (HT). Two neural network functions are discussed: a detector and a classifier. The detector detected the damage and the classifier determined the type of damage to the rolling bearing (undamaged bearing, damaged rolling element, outer or inner race). The effectiveness of the analysed networks from the point of view of the applied signal processing method, map size, type of neighbourhood radius, distance function and the influence of input data normalisation are presented. The results are presented in the form of a confusion matrix, together with 2D and 3D maps of active neurons.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Most studies are carried out using physically damaged bearings by cutting, drilling or electrically engraved pitting of the component [117], [120], [121], [125], [127], [129], [138]- [140].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [120]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kohonen, T. (2001) · Springer Series in Information Sciences · doi:10.1007/978-3-642-56927-2 · Cited by 16,019
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“Most of the methods are based on the analysis of the diagnostic signal (Henao et al., 2014).”
MethodImmovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Frosini, L., Harlisca, C., & Szabo, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2361115 · Cited by 264 · cited 1×
“In the case of bearings damage, the diagnostic signal may be, for example, noise (Lu et al., 2018), vibrations (Nkuna, 2006), current (Picot et al., 2014), and stray flux (Frosini et al., 2015).”
BackgroundSound based induction motor fault diagnosis using Kohonen self-organizing map
Germen, E., Başaran, M., & Fidan, M. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.12.002 · Cited by 112 · cited 1×
“Early diagnostics help to recognise and fix the problems with low cost and time (Germen et al., 2014).”
BackgroundLu, S., He, Q., & Zhao, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.02.046 · Cited by 95 · cited 2×
“In the case of bearings damage, the diagnostic signal may be, for example, noise (Lu et al., 2018), vibrations (Nkuna, 2006), current (Picot et al., 2014), and stray flux (Frosini et al., 2015).”
BackgroundUllah, Z., Lodhi, B. A., & Hur, J. (2020) · Energies · doi:10.3390/en13153834 · Cited by 82 · cited 1×
“See for example Ullah et al. (2020).”
Picot, A., Obeid, Z., Régnier, J., Poignant, S., Darnis, O., & Maussion, P. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.01.006 · Cited by 60 · cited 2×
“In the case of bearings damage, the diagnostic signal may be, for example, noise (Lu et al., 2018), vibrations (Nkuna, 2006), current (Picot et al., 2014), and stray flux (Frosini et al., 2015).”
BackgroundRosero, J., Romeral, L., Rosero, E., & Urresty, J. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802777 · Cited by 57 · cited 2×
“Methods used for signal processing may be fast Fourier transform (FFT) (Rosero et al., 2009), Hilbert transform (HT) (Skora et al.”
MethodEwert, P., Orlowska-Kowalska, T., & Jankowska, K. (2021) · Energies · doi:10.3390/en14030712 · Cited by 48 · cited 2×
“, 2019), or detection and classification of rolling bearing damage (Ewert et al., 2021).”
BackgroundMethodSelf-citation
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
Self-citationMueller, P. N., Woelfl, L., & Can, S. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106834 · Cited by 58
Navarro-Navarro, Á., Ruiz-Sarrio, J. E., Biot-Monterde, V., Daviu, J. A. A., Becker, V., & Urschel, S. (2023) · Machines · doi:10.3390/machines11020288 · Cited by 17
Wei, Y., Ren, B., Gao, L., Chi, H., Li, X., Liu, J., Sun, Q., Sun, W., & Shu, L. (2026) · Advanced Engineering Informatics · doi:10.1016/j.aei.2026.104443 · Cited by 8
Face Detection Analysis of Digital Photos Using Mean Filtering Method
Sunardi, S., Yudhana, A., & Wijaya, S. A. (2022) · International Journal of Artificial Intelligence Research · doi:10.29099/ijair.v6i2.307 · Cited by 6
Metadata
- Authors
- Jankowska, K., & Ewert, P.
- Affiliations
- Wrocław University of Science and Technology (PL)
- Corresponding author
- Ewert, Pawel
- Venue
- Power Electronics and Drives
- Publisher
- Walter de Gruyter GmbH
- Published
- 2021-01-01
- Volume
- 6
- Issue
- 1
- Pages
- 100-112
- ISSN
- 2451-0262 (ISSN-L)
- 2543-4292
- OpenAlex
- W3185793720
- Cited by
- 9
- References
- 22
- Citations by year
- 2026: 3 · 2024: 1 · 2023: 3 · 2022: 2
- FWCI
- 0.67
- Type
- journal article
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- Locations
- Power Electronics and Drives (publishedVersion, cc-by-nc-nd)
- Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- rolling bearing fault detection, permanent magnet synchronous motor, Kohonen neural network, self-organizing maps, vibration signal analysis, envelope analysis, Hilbert transform, data normalization, electric vehicle drives
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effectiveness Analysis of Rolling Bearing Fault Detectors Based On Self-Organising Kohonen Neural Network – A Case Study of PMSM Drive. https://app.cochat.ai/papers/10.2478/pead-2021-0008
- The paper
- Jankowska, K., & Ewert, P. (2021). Effectiveness Analysis of Rolling Bearing Fault Detectors Based On Self-Organising Kohonen Neural Network – A Case Study of PMSM Drive. Power Electronics and Drives. https://doi.org/10.2478/pead-2021-0008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.