Metal-containing Materials as Turning Point of EUV Lithography
Open accessThe DOI matches its Crossref record.
Abstract
Limitations on current performances of the chemically amplified resists (CAR), as well as the productivity driven low exposure dose requirements (below 20 mJ/cm2), have brought the researchers to look at a novel class of materials as possible alternative to the CA resists to simultaneously achieve resolution, line-width roughness (LWR) and sensitivity. In 2014, imec has started a new project to look into novel materials for EUV lithography with particular attention to metal containing materials (MCR) to explore alternative approaches that can offer superior characteristics in photoresist imaging: improved LWR and line collapse, high sensitivity and high etch resistance. In this paper we report the first assessment on the enablers of the MCRs from a manufacturing compatibility prospective, as metal cross-contamination and outgassing, to a device integration prospective through the patterning on the ASML NXE:3300 full field scanner exposure tool, the etch performances and new litho-etch integration scheme for 1x nm technology and below. The results obtained are highly promising and give a clear indication that other chemical paths in novel resist formulations are possible in advanced EUV lithography.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Key Challenges and Opportunities for Advanced Extreme Ultraviolet Lithography Photoresist Materials
Li, M., & Aqad, E. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202420962 · Cited by 33
Kataoka, S., & Sue, K. (2022) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.202200050 · Cited by 26
Toriumi, M., Sato, Y., Koshino, M., Suenaga, K., & Itani, T. (2016) · Applied Physics Express · doi:10.7567/apex.9.031601 · Cited by 22
Demonstration of an N7 integrated fab process for metal oxide EUV photoresist
De Simone, D., Mao, M., Kocsis, M., De Schepper, P., Lazzarino, F., Vandenberghe, G., Stowers, J., Meyers, S., Clark, B. L., Grenville, A., et al. (2016) · SPIE Proceedings · doi:10.1117/12.2220051 · Cited by 21
Self-citationCharacterization of 'metal resist' for EUV lithography
Toriumi, M., Sato, Y., Kumai, R., Yamashita, Y., Tsukiyama, K., & Itani, T. (2016) · SPIE Proceedings · doi:10.1117/12.2219030 · Cited by 16
Metadata
- Authors
- De Simone, D., Pollentier, I., & Vandenberghe, G.
- Venue
- Journal of Photopolymer Science and Technology
- Published
- 2015
- Volume
- 28
- Issue
- 4
- Pages
- 507-514
- ISSN
- 0914-9244 (ISSN-L)
- 1349-6336
- OpenAlex
- W1202456769
- Cited by
- 26
- References
- 0
- FWCI
- 1.76
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metal-containing Materials as Turning Point of EUV Lithography. https://app.cochat.ai/papers/10.2494/photopolymer.28.507
- The paper
- De Simone, D., Pollentier, I., & Vandenberghe, G. (2015). Metal-containing Materials as Turning Point of EUV Lithography. Journal of Photopolymer Science and Technology. https://doi.org/10.2494/photopolymer.28.507
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.