Physical Characterization or Aerosol Emissions from a Commercial Gas Turbine Engine
The DOI matches its Crossref record.
Abstract
This paper discusses the results of the Aircraft Particle Emissions Experiment Project for the physical characterization of total (nonvolatile plus volatile) aerosol emissions (emission factors, hydration properties, and distribution shape parameters) by extractive sampling from an on-wing CFM56-2C 1 engine. Samples were extracted at the engine exit plane (1 m) as well as locations 10 and 30 m downstream. Three different fuels were used in this study: base fuel, high-sulfur fuel, and high-aromatic fuel. For the 1 and 10-m probe locations, strong and sometimes nonlinear dependencies were observed on fuel flow rate and no statistically significant dependencies were observed for fuel composition. At 30 m, the onset of gas-to-particle conversion was apparent for low- to medium-fuel flow rates. The soluble mass fraction was found to increase with distance from the engine exit plane and with increasing fuel aromatic and sulfur content. An intercomparison of gas and particle sampling trains showed that gas-to-particle conversion is a serious sample train artifact for gas sampling trains in which dilution cannot be achieved at the probe tip.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lobo, P., Hagen, D. E., & Whitefield, P. D. (2011) · Environmental Science & Technology · doi:10.1021/es201902e · Cited by 140
Self-citationBrem, B. T., Durdina, L., Siegerist, F., Beyerle, P., Bruderer, K., Rindlisbacher, T., Rocci-Denis, S., Andac, M. G., Zelina, J., Penanhoat, O., et al. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b04167 · Cited by 140
Cain, J., DeWitt, M. J., Blunck, D., Corporan, E., Striebich, R., Anneken, D., Klingshirn, C., Roquemore, W. M., & Vander Wal, R. (2013) · Energy & Fuels · doi:10.1021/ef400009c · Cited by 65
Metadata
- Authors
- Lobo, P., Hagen, D. E., Whitefield, P. D., & Alofs, D. J.
- Venue
- Journal of Propulsion and Power
- Published
- 2007-09
- Volume
- 23
- Issue
- 5
- Pages
- 919-929
- ISSN
- 0748-4658 (ISSN-L)
- 1533-3876
- OpenAlex
- W1995187966
- Cited by
- 59
- References
- 0
- FWCI
- 3.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.