High-Current Lanthanum Hexaboride Hollow Cathode for High-Power Hall Thrusters
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
NASA is continuing to develop high-power Hall thrusters in the range of 20 to 100 kW for future cargo and manned missions. The cathodes for these thrusters will be required to produce discharge currents in the 50 to 300 A range with lifetimes in excess of 10 kh. A prototype high-current hollow cathode with a 2-cm-diam lanthanum hexaboride insert was previously developed for these applications. The original design featured a graphite cathode tube to interface with the insert and an insulated sheath heater capable of heating the higher temperature emitter to ignition temperatures. A new version of this cathode has been designed and built that uses a refractory metal cathode tube and features a robust design similar to the small cathode used for the H6 Hall thruster. The new cathode has been successfully tested at steady-state discharge currents from 25 to 300 A. This cathode is intended to be used in an 80 kW nested Hall thruster being built at the University of Michigan at discharge currents of over 250 A.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Goebel, D. M., Jameson, K. K., Watkins, R. M., Katz, I., & Mikellides, I. G. (2005) · Journal of Applied Physics · doi:10.1063/1.2135417 · Cited by 129
Self-citation
Cited by
Goebel, D. M., Becatti, G., Mikellides, I. G., & Lopez Ortega, A. (2021) · Journal of Applied Physics · doi:10.1063/5.0051228 · Cited by 95
Self-citationReview of High-Power Electrostatic and Electrothermal Electric Propulsion
Jovel, D. R., Walker, M. L. R., & Herman, D. (2022) · Journal of Propulsion and Power · doi:10.2514/1.b38594 · Cited by 38
Numerical study of a hollow cathode neutraliser by means of a zero-dimensional plasma model
Gurciullo, A., Fabris, A. L., & Potterton, T. (2020) · Acta Astronautica · doi:10.1016/j.actaastro.2020.05.006 · Cited by 16
Hybrid-PIC Simulation on Plasma Flow of Hollow Cathode
KUBOTA, K., OSHIO, Y., WATANABE, H., CHO, S., OHKAWA, Y., & FUNAKI, I. (2016) · TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, AEROSPACE TECHNOLOGY JAPAN · doi:10.2322/tastj.14.pb_189 · Cited by 13
Oshio, Y., Hirai, K., Watanabe, H., Horisawa, H., & Funaki, I. (2024) · doi:10.21203/rs.3.rs-5180086/v1 · Cited by 1
Metadata
- Authors
- Goebel, D. M., & Chu, E.
- Venue
- Journal of Propulsion and Power
- Published
- 2014-01
- Volume
- 30
- Issue
- 1
- Pages
- 35-40
- ISSN
- 0748-4658 (ISSN-L)
- 1533-3876
- OpenAlex
- W2048931167
- Cited by
- 82
- References
- 1
- FWCI
- 2.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.