The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Updating finite element dynamic models using an element-by-element sensitivity methodology
Abstract
A sensitivity-based methodology for improving the finite element model of a given structure using test modal data and a few sensors is presented. The proposed method searches for both the location and sources of the mass and stiffness errors and does not interfere with the theory behind the finite element model while correcting these errors. The updating algorithm is derived from the unconstrained minimization of the squared L sub 2 norms of the modal dynamic residuals via an iterative two-step staggered procedure. At each iteration, the measured mode shapes are first expanded assuming that the model is error free, then the model parameters are corrected assuming that the expanded mode shapes are exact. The numerical algorithm is implemented in an element-by-element fashion and is capable of 'zooming' on the detected error locations. Several simulation examples which demonstate the potential of the proposed methodology are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Golub, G. (2012) · doi:10.56021/9781421407944 · Cited by 34,505
Reduction of stiffness and mass matrices
GUYAN, R. J. (1965) · AIAA Journal · doi:10.2514/3.2874 · Cited by 2,642
Proceedings of the 15th International Modal Analysis Conference
Vol., P. S. (1997) · Cited by 683
Improvement of a Large Analytical Model Using Test Data
Berman, A., & Nagy, E. J. (1983) · AIAA Journal · doi:10.2514/3.60140 · Cited by 565
Statistical Identification of Structures
COLLINS, J. D., HART, G. C., HASSELMAN, T. K., & KENNEDY, B. (1974) · AIAA Journal · doi:10.2514/3.49190 · Cited by 477
Stiffness matrix adjustment using mode data
Kabe, A. M. (1985) · AIAA Journal · doi:10.2514/3.9103 · Cited by 340
Optimization procedure to correct stiffness and flexibility matrices using vibration tests
Baruch, M. (1978) · AIAA Journal · doi:10.2514/3.61032 · Cited by 322
Eigenstructure assignment approach for structural damage detection
Zimmerman, D. C., & Kaouk, M. (1992) · AIAA Journal · doi:10.2514/3.11146 · Cited by 92
STRUCTURAL HEALTH MONITORING ORIENTED FINITE ELEMENT MODEL OF TSING MA BRIDGE TOWER
Fei, Q. G., Xu, Y. L., Ng, C. C., Wong, K. Y., Chan, W. Y., & Man, K.-L. (2007) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455407002502 · Cited by 43
Diagnostics for geometrically locating structural math model errors from modal test data
Ojalvo, I. U., & PILON, D. (1988) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.1988-2358 · Cited by 35
Cited by
Vibration Based Condition Monitoring: A Review
Carden, E. P., & Fanning, P. (2004) · Structural Health Monitoring · doi:10.1177/1475921704047500 · Cited by 1,543
Computational methods in optimization considering uncertainties – An overview
Schuëller, G. I., & Jensen, H. A. (2008) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.05.004 · Cited by 572
SIMPLIFIED MODELS FOR THE LOCATION OF CRACKS IN BEAM STRUCTURES USING MEASURED VIBRATION DATA
SINHA, J. K., FRISWELL, M. I., & EDWARDS, S. (2002) · Journal of Sound and Vibration · doi:10.1006/jsvi.2001.3978 · Cited by 423
Wang, Z., & Cha, Y.-J. (2021) · Structural Health Monitoring · doi:10.1177/1475921720934051 · Cited by 336
Alkayem, N. F., Cao, M., Zhang, Y., Bayat, M., & Su, Z. (2018) · Neural Computing and Applications · doi:10.1007/s00521-017-3284-1 · Cited by 262
Metadata
- Authors
- Farhat, C., & Hemez, F. M.
- Venue
- AIAA Journal
- Published
- 1993-09
- Volume
- 31
- Issue
- 9
- Pages
- 1702-1711
- ISSN
- 0001-1452 (ISSN-L)
- 1533-385X
- OpenAlex
- W1984069088
- Cited by
- 283
- References
- 11
- FWCI
- 41.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Updating finite element dynamic models using an element-by-element sensitivity methodology. https://app.cochat.ai/papers/10.2514/3.11833
- The paper
- Farhat, C., & Hemez, F. M. (1993). Updating finite element dynamic models using an element-by-element sensitivity methodology. AIAA Journal. https://doi.org/10.2514/3.11833
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.