The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Distributed piezoelectric-polymer active vibration control of a cantilever beam
Abstract
An active vibration damper for a cantilever beam was designed using a distributed-parameter actuator and distributed-parameter control theory. The distributed-parameter actuator was a piezoelectric polymer, poly (vinylidene fluoride). Lyapunov's second method for distributed-parameter systems was used to design a control algorithm for the damper. If the angular velocity of the tip of the beam is known, all modes of the beam can be controlled simultaneously. Preliminary testing of the damper was performed on the first mode of the cantilever beam. A linear constant-gain controller and a nonlinear constant-amplitude controller were compared. The baseline loss factor of the first mode was 0.003 for large-amplitude vibrations (± 2 cm tip displacement) decreasing to 0.001 for small vibrations (±0.5 mm tip displacement). The constant-gain controller provided more than a factor of two increase in the modal damping with a feedback voltage limit of 200 V rms. With the same voltage limit, the constant-amplitude controller achieved the same damping as the constant-gain controller for large vibrations, but increased the modal loss factor by more than an order of magnitude to at least 0.040 for small vibration levels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Feedback control of flexible systems
Balas, M. (1978) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1978.1101798 · Cited by 797
Control System Analysis and Design Via the “Second Method” of Lyapunov: I—Continuous-Time Systems
Kalman, R. E., & Bertram, J. E. (1960) · Journal of Basic Engineering · doi:10.1115/1.3662604 · Cited by 790
Optimal control of distributed parameter systems
Ahmed, N. U., & Teo, K. L. (1981) · Cited by 242
Cited by
Use of piezoelectric actuators as elements of intelligent structures
Crawley, E. F., & de Luis, J. (1987) · AIAA Journal · doi:10.2514/3.9792 · Cited by 2,602
Finite element modeling of piezoelectric sensors and actuators
Hwang, W.-S., & Park, H. C. (1993) · AIAA Journal · doi:10.2514/3.11707 · Cited by 469
Inman, D. J. (2006) · Wiley eBooks · doi:10.1002/0470010533 · Cited by 338
Chee, C. Y. K., Tong, L., & Steven, G. P. (1998) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x9800900101 · Cited by 293
A review of active structural control: challenges for engineering informatics
Korkmaz, S. (2011) · Computers & Structures · doi:10.1016/j.compstruc.2011.07.010 · Cited by 290
Metadata
- Authors
- Bailey, T., & Hubbard, J. E.
- Venue
- Journal of Guidance, Control, and Dynamics
- Published
- 1985-09
- Volume
- 8
- Issue
- 5
- Pages
- 605-611
- ISSN
- 0731-5090 (ISSN-L)
- 1533-3884
- OpenAlex
- W2110190769
- Cited by
- 1,337
- References
- 3
- FWCI
- 30.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.