Hollow Cathode and Keeper-Region Plasma Measurements Using Ultra-Fast Miniature Scanning Probes
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
In order to support the development of comprehensive performance and life models for future deep space missions that will utilize ion thrusters, we have undertaken a study of the plasma structure in hollow cathodes using an new pneumatic scanning probe diagnostic. This device is designed to insert a miniature probe directly into the hollow cathode orifice from either the upstream insert region in the interior of the hollow cathode, or from the downstream keeper-plasma region at the exit of the hollow cathode, to provide complete axial profiles of the discharge plasma parameters. Previous attempts to diagnose this region with probes was Limited by the melting of small probes in the intense discharge near the orifice, or caused significant perturbation of the plasma by probes large enough to survive. Our new probe is extremely compact, and when configured as a single Langmuir probe, the ceramic tube insulator is only 0.5mm in diameter and the current collecting conductor has a total area of 0.002 cm2. A series of current-voltage characteristics are obtained by applying a rapid sawtooth voltage waveform to the probe as it is scanned by the pneumatic actuator into and out of the plasma region, The bellow-sealed pneumatic drive scans the probe 4 cm in the cathode insert region and 10 cm in the anode/keeper plasmas region at average speeds of about 1 mm/msec, and the residence time at the end of the insertion stroke in the densest part of the plasma near the orifice is measured to be only 10 msec. Since the voltage sweep time is fast compared to the motion of the probe, axial profiles of the plasma density, temperature and potential with reasonable spatial resolution are obtained. Measurements of the internal cathode pressures and the axial plasma-parameter profiles for a hollow cathode operating at discharge currents of up to 35 A in xenon will be presented.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Characteristics of Electrical Discharges in Magnetic Fields
(1950) · Journal of the American Medical Association · doi:10.1001/jama.1950.02920020129032 · Cited by 1,128
The characteristics of electrical discharges in magnetic fields
Guthrie, A., & Wakerling, R. K. (1949) · McGraw-Hill eBooks · Cited by 303
Langmuir probe measurements in an inductively coupled plasma source
Schwabedissen, A., Benck, E. C., & Roberts, J. R. (1997) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.55.3450 · Cited by 149
A Mercury plasma-bridge neutralizer.
RAWLIN, V. K., & PAWLIK, E. V. (1968) · Journal of Spacecraft and Rockets · doi:10.2514/3.29363 · Cited by 75
Magneto-electrostatically contained plasma ion thruster
MOORE, R. (1969) · AIAA Electric Propulsion Conference · doi:10.2514/6.1969-260 · Cited by 50
An investigation of mercury hollow cathode phenomena
SIEGFRIED, D., & WILBUR, P. (1978) · 13th International Electric Propulsion Conference · doi:10.2514/6.1978-705 · Cited by 48
Model of the Plasma Potential Distribution in the Plume of a Hollow Cathode
Mikellides, I. G., Katz, I. M., & Goebel, D. M. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-4108 · Cited by 19
Self-citationMeasurements of electron energy distributions in a 14 cm diameter ring cusp ion thruster
Hayakawa, Y., Miyazaki, K., & KITAMURA, S. (1989) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1989-2715 · Cited by 14
Model of a Hollow Cathode Insert Plasma
Mikellides, I. G., Katz, I. M., Goebel, D. M., & Polk, J. E. (2004) · NASA Technical Reports Server (NASA) · Cited by 8
Self-citationPerformance of a magnetic multipole line-cusp argon ion thruster
Sovey, J. S. (1981) · AIAA Electric Propulsion Conference · doi:10.2514/6.1981-745 · Cited by 7
Research works printed but not linked: 3
- Mikellides I., AIAA Paper #2004-3817, 40th JointPropulsionConference,Ft.Lauderdale,FL,July11-14,2004.
- Chen F., 1966, Plasma Diagnostics Techniques
- Kameyama I., ISTSPaper#98-a-2-17, 21stIntl.SymposiumonSpaceTechnologyandScience,SonicCity,Omiya,Japan,May24-21,1998.
Cited by
LaB6 Hollow Cathodes for Ion and Hall Thrusters
Goebel, D. M., Watkins, R. M., & Jameson, K. K. (2007) · Journal of Propulsion and Power · doi:10.2514/1.25475 · Cited by 143
Self-citationLifetime Assessment of the NEXT Ion Thruster
Noord, J. V. (2007) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2007-5274 · Cited by 72
Analytical Ion Thruster Discharge Performance Model
Goebel, D. M., Wirz, R. E., & Katz, I. (2007) · Journal of Propulsion and Power · doi:10.2514/1.26404 · Cited by 67
Self-citationRecent advances in nuclear powered electric propulsion for space exploration
Cassady, R. J., Frisbee, R., Gilland, J. H., Houts, M. G., LaPointe, M. R., Maresse-Reading, C. M., Oleson, S. R., Polk, J. E., Russell, D., & Sengupta, A. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.10.015 · Cited by 66
An evaluation of krypton propellant in Hall thrusters.
Linnell, J. A. (2007) · Deep Blue (University of Michigan) · Cited by 61
Hollow Cathode and Keeper-Region Plasma Measurements
Jameson, K. K., Goebel, D. M., & Watkins, R. M. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3667 · Cited by 60
Self-citationElectric Propulsion Technology Development for the Jupiter Icy Moon Orbiter Project
Oleson, S. R. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3449 · Cited by 52
Temperature Distributions in Hollow Cathode Emitters
Polk, J., Marrese, C., Dang, L., Johnson, L., & Thornber, B. (2004) · 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-4116 · Cited by 50
“In addition, the distribution of plasma density, potential and electron temperature will be measured for this cathode geometry using a fast scanning Langmuir probe [8].”
BackgroundMethodCharacterization of a Heaterless Hollow Cathode
Vekselman, V., Krasik, Y. E., Gleizer, S., Gurovich, V. T., Warshavsky, A., & Rabinovich, L. (2013) · Journal of Propulsion and Power · doi:10.2514/1.b34628 · Cited by 50
Plasma Processes of DC Ion Thruster Discharge Chambers
Wirz, R. E., & Katz, I. M. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3690 · Cited by 50
Self-citationAn Overview of the Nuclear Electric Xenon Ion System (NEXIS) Activity
Randolph, T. M., & Polk, J. E. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3450 · Cited by 46
Discharge Chamber Plasma Structure of a 30 cm NSTAR-type Ion Engine
Herman, D. A., & Gallimore, A. D. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3794 · Cited by 46
A Reduced-Order Model for Thermionic Hollow Cathodes
Albertoni, R., Pedrini, D., Paganucci, F., & Andrenucci, M. (2013) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2013.2266512 · Cited by 39
Dynamics of a hollow cathode discharge in the frequency range of 1–500 kHz
Mikellides, I. G., Ortega, A. L., Goebel, D. M., & Becatti, G. (2020) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab69e4 · Cited by 38
Self-citationTheoretical Model of a Hollow Cathode Insert Plasma
Mikellides, I. G., Katz, I. M., Goebel, D. M., & Polk, J. E. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3817 · Cited by 35
Self-citationTheoretical Model of a Lanthanum Hexaboride Hollow Cathode
Pedrini, D., Albertoni, R., Paganucci, F., & Andrenucci, M. (2014) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2014.2367815 · Cited by 32
Extending Hollow Cathode Life for Electric Propulsion for Long-Term Missions
Goebel, D. M. (2004) · Space 2004 Conference and Exhibit · doi:10.2514/6.2004-5911 · Cited by 32
Self-citationBecatti, G., Conversano, R. W., & Goebel, D. M. (2020) · Acta Astronautica · doi:10.1016/j.actaastro.2020.09.013 · Cited by 31
Self-citationDownstream Ion Energy Distributions in a Hollow Cathode Ring Cusp Discharge
Foster, J. E., & Patterson, M. (2005) · Journal of Propulsion and Power · doi:10.2514/1.4771 · Cited by 26
Experimentally Determined Neutral Density and Plasma Parameters in a 30 CM Ion Engine
Sengupta, A., Goebel, D. M., Tynan, G. R., Doerner, R. P., Fitzgerald, D. J., & Owens, A. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3613 · Cited by 25
Self-citationTheory and Experimental Evaluation of Electrodynamic Tether Systems and Related Technologies.
Fuhrhop, K. R. P. (2007) · Deep Blue (University of Michigan) · Cited by 23
2-D Discharge Chamber Model for Ion Thrusters
Wirz, R. E., & Katz, I. M. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-4107 · Cited by 21
Self-citationHerakles Thruster Development for the Prometheus JIMO Mission
Patterson, M., Elliott, F., Malone, S., Soulas, G. C., Goebel, D. M., & Sengupta, A. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3890 · Cited by 21
Self-citationOperation of a Hollow Cathode Neutralizer for Sub-100-W Hall and Ion Thrusters
Lev, D. R., & Alon, G. (2017) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2017.2779409 · Cited by 20
Model of the Plasma Potential Distribution in the Plume of a Hollow Cathode
Mikellides, I. G., Katz, I. M., & Goebel, D. M. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-4108 · Cited by 19
Self-citationLaB6 Hollow Cathodes for Ion and Hall Thrusters
Goebel, D. M., & Watkins, R. M. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4239 · Cited by 19
Self-citationA Critical Review of Orificed Hollow Cathode Modeling: 0D Models
Wordingham, C. J., Taunay, P.-Y., & Choueiri, E. (2017) · AIAA/SAE/ASEE Joint Propulsion Conference (JPC) · doi:10.2514/6.2017-4888 · Cited by 17
Erosion Processes of the Discharge Cathode Assembly of Ring-Cusp Gridded Ion Thrusters
Gallimore, A. D., Rovey, J. L., & Herman, D. A. (2007) · Journal of Propulsion and Power · doi:10.2514/1.27897 · Cited by 17
Experimental Investigation of Discharge Plasma Magnetic Confinement in the NSTAR Ion Thruster
Sengupta, A. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4069 · Cited by 17
Electron Energy Distribution Measurements in the Plume Region of a Low Current Hollow Cathode
Behlman, N. J. (2010) · Digital WPI · Cited by 16
Internal Langmuir Probe Mapping of a Hall Thruster with Xenon and Krypton Propellant
Linnell, J. A., & Gallimore, A. D. (2006) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2006-4470 · Cited by 16
Mikellides, I. G., Guerrero, P., Ortega, A. L., & Polk, J. E. (2018) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2018-4722 · Cited by 15
Production of High Energy Ions Near an Ion Thruster Discharge Hollow Cathode
Katz, I. M., Mikellides, I. G., Goebel, D. M., Jameson, K. K., Wirz, R. E., & Johnson, L. (2006) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2006-4485 · Cited by 15
Self-citationPerformance and Wear Test Results for a 20 kW-Class Ion Engine with Carbon-Carbon Grids
Polk, J., Goebel, D. M., Synder, J., Schneider, A., Johnson, L., & Sengupta, A. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4393 · Cited by 15
Self-citationDischarge Cathode Electron Energy Distribution Functions in a 40-cm NEXT-Type Ion Engine
Herman, D. A., & Gallimore, A. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4252 · Cited by 15
Discharge Chamber Plasma Potential Mapping of a 40-cm NEXT-type Ion Engine
Herman, D. A., & Gallimore, A. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4251 · Cited by 14
Development of the MiXI Thruster with the ARCH Discharge
Samples, S., & Wirz, R. E. (2020) · Plasma Research Express · doi:10.1088/2516-1067/ab906d · Cited by 13
Microthrusters based on the T5 and T6 hollow cathodes
Grubisic, A. N. (2011) · ePrints Soton (University of Southampton) · Cited by 12
Resonant Cavity Hollow Cathode
Diamant, K. D. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3662 · Cited by 11
Discharge Chamber Plasma Structure of a 40-cm NEXT-type Ion Engine
Herman, D. A., & Gallimore, A. D. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4250 · Cited by 11
Particle based plasma simulation for an ion engine discharge chamber
Mahalingam, S. (2007) · CORE Scholar (Wright State University) · Cited by 10
Physics of thermionic, orificed hollow cathodes: I. Theory and experimental validation
Taunay, P.-Y., Wordingham, C. J., & Choueiri, E. (2022) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ac5c63 · Cited by 9
High Current Cathode Development for 50 kW Class Hall Thrusters
John, J. W., Sarver-Verhey, T. R., Jacobson, D., & Kamhawi, H. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4244 · Cited by 8
Results of a 2000-Hour Wear Test of the NEXIS Ion Engine
Snyder, J., Goebel, D. M., Polk, J. E., Schneider, A., & Sengupta, A. (2005) · Cited by 8
Self-citationModel of a Hollow Cathode Insert Plasma
Mikellides, I. G., Katz, I. M., Goebel, D. M., & Polk, J. E. (2004) · NASA Technical Reports Server (NASA) · Cited by 8
Self-citationIon Engine Discharge Chamber Plasma Modeling Using a 2-D PIC Simulation
Mahalingam, S., & Menart, J. A. (2006) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2006-4488 · Cited by 8
Influence of heating on the discharge characteristics of a hollow cathode
Hu, Y., Ning, Z., Liu, X., Chu, Y., Wei, M., Shen, Y. R., & Zhu, X.-M. (2019) · Plasma Science and Technology · doi:10.1088/2058-6272/ab472a · Cited by 7
Plasma Surface Interaction Studies for Next-Generation Ion Thrusters
Tynan, G. R., Doerner, R. P., Goebel, D. M., Katz, I. M., Oyerzabal, E., & Taylor, K. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-4104 · Cited by 7
Self-citationHuang, Y.-L., Hsieh, J. H., Wang, W., & Li, Y. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.11.018 · Cited by 6
Martin, R. H., & Williams, J. D. (2006) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2006-4820 · Cited by 6
Measurement of Ion Energy Distributions Produced within an NSTAR Discharge Chamber
Farnell, C. C., & Williams, J. D. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3432 · Cited by 6
Electric Propulsion for Project Prometheus' Jupiter Icy Moon Orbiter
Oleson, S. R. (2004) · Space 2004 Conference and Exhibit · doi:10.2514/6.2004-5908 · Cited by 6
Modélisation d'une cathode creuse pour propulseur à plasma
Sary, G. (2016) · theses.fr (ABES) · doi:10.70675/9aee20b5ze30fz430ezac81z6bf48413107e · Cited by 6
The attachment length in orificed hollow cathodes
Wordingham, C. J., Taunay, P.-Y., & Choueiri, E. (2021) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ac3d3f · Cited by 5
An empirical scaling relationship for the total pressure in hollow cathodes
Taunay, P.-Y., Wordingham, C. J., & Choueiri, E. (2018) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2018-4428 · Cited by 5
Direct and Remote Measurements of Plasma Properties nearby Hollow Cathodes
Martin, R. H., Farnell, C. C., & Williams, J. D. (2005) · Cited by 5
Randolph, T. M. (2004) · Space 2004 Conference and Exhibit · doi:10.2514/6.2004-5909 · Cited by 5
Martens, P. D., Barton, D. A. W., Schartner, A. P., Charles, C., & Boswell, R. W. (2025) · Journal of Electric Propulsion · doi:10.1007/s44205-025-00115-3 · Cited by 4
Korkmaz, O., & Celik, M. (2014) · Contributions to Plasma Physics · doi:10.1002/ctpp.201400036 · Cited by 4
Open Electric Propulsion with an Application to Thermionic Orificed Hollow Cathodes
Taunay, P.-Y., Wordingham, C. J., & Choueiri, E. (2020) · AIAA Propulsion and Energy Forum · doi:10.2514/6.2020-3638 · Cited by 3
Electron Trajectory Simulation in Experimental Hall Thruster Fields
McDonald, M., & Gallimore, A. D. (2011) · Cited by 3
Cathode Keeper Orifice Wear Measurements Using Surface Layer Activation
Kolasinski, R. D., & Polk, J. E. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3664 · Cited by 3
Tsukizaki, R., Koizumi, H., Shimamura, K., Nishiyama, K., & Kuninaka, H. (2012) · JOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES · doi:10.2322/jjsass.60.135 · Cited by 2
Physics of thermionic orificed hollow cathodes: II. Scaling laws and design rules
Taunay, P.-Y., Wordingham, C. J., & Choueiri, E. (2022) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ac734d · Cited by 2
Plume Structure and Current-Voltage Characteristic Analysis for a Cathodic Plasma Contactor
Xia, Q., Xie, K., Guo, N., Jia, Y.-H., Liu, X., & Wu, Z. (2015) · AIAA Aerospace Sciences Meeting · doi:10.2514/6.2015-1397
Scaling Relationships for the Total Pressure in Orificed Hollow Cathodes
Taunay, P.-Y., Wordingham, C. J., & Choueiri, E. (2019) · AIAA Propulsion and Energy Forum · doi:10.2514/6.2019-4246
Discharge Chamber Plasma Structure of a 40-cm NEXT-type Ion Engine
Herman, D. A., & Gallimore, A. D. (2005) · Deep Blue (University of Michigan)
Discharge Chamber Plasma Potential Mapping of a 40-cm NEXT-type Ion Engine
Herman, D. A., & Gallimore, A. D. (2005) · Deep Blue (University of Michigan)
Discharge Cathode Electron Energy Distribution Functions in a 40-cm NEXT-Type Ion Engine
Herman, D. A., & Gallimore, A. D. (2005) · Deep Blue (University of Michigan)
マイクロ波放電式イオンエンジンμ10 における光ファイバを活用したプラズマ診断
月崎, 竜., 小泉, 宏., 伊勢, 俊., 西山, 和., 國中, 均., Tsukizaki, R., Koizumi, H., Ise, T., Nishiyama, K., & Kuninaka, H. (2013) · Institutional Repositories DataBase (IRDB)
Kojima, K. (2021) · Institutional Repositories DataBase (IRDB) · doi:10.15068/0002001018
Experimentally Determined Plasma Parameters in a 30 cm Ion Engine
Sengupta, A., Goebel, D. M., Fitzgerald, D. J., Owens, A., Tynan, G. R., & Dorner, R. (2004) · NASA Technical Reports Server (NASA)
Self-citation
Metadata
- Authors
- Goebel, D., Katz, I., Watkins, R., & Jameson, K.
- Affiliations
- Jet Propulsion Laboratory (US)
- ORCID
- Venue
- 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
- Published
- 2004-06-26
- OpenAlex
- W2074404964
- Cited by
- 63
- References
- 10
- Citations by year
- 2025: 1 · 2024: 1 · 2022: 2 · 2021: 1 · 2020: 4 · 2019: 2 · 2018: 2 · 2017: 2 · 2015: 1 · 2014: 2 · 2013: 2 · 2012: 1
- FWCI
- 16.52
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit (publishedVersion)
- Funders
- National Aeronautics and Space Administration
- Jet Propulsion Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-Pressure Plasma Processing and Diagnostics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Vacuum and Plasma Arcs
- Physical Sciences › Physics and Astronomy › Nuclear and High Energy Physics › Magnetic confinement fusion research
- Keywords
- hollow cathode, ion thrusters, Langmuir probes, plasma density, plasma temperature, plasma electric potential, xenon discharge, cathode pressure, deep space propulsion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.