The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
Abstract
An integrated modelling approach, suitable for flight loads analysis and flight dynamics investigations is presented.These scenarios need fast loop capable simulation models.Typically, they are evaluated many times in the entire flight envelope, for varying mass cases and for changing parameters during the aircraft design process.Further, the simulations models have very different requirements depending on their application.Flight dynamics models must account for large nonlinear rigid body motions and aerodynamic nonlinearities, manoeuvre loads analysis, additionally need to take flexible deformations into account, and hence require distributed aerodynamics, and for gust loads analysis unsteady aerodynamic effects are essential.The proposed integrated model is based on nonlinear equations of motion using mean axes constraints.Potential flow based aerodynamics with low computational cost are the method of choice for most aeroelastic applications.Presented in this paper are some important aspects regarding the aerodynamic modelling, which are handled differently compared to other implementations.Instead of the Doublet Lattice Method (DLM), the 3D panel method NEWPAN is used, which is able to capture previously neglected flight mechanical effects such as roll-yaw coupling and induced drag.Since, the Aerodynamic Influence Coefficient (AIC) matrices obtained from NEWPAN are nonlinearly dependent on the flight state, a Reduced Order Model (ROM) based on Proper Orthogonal Decomposition (POD) is setup and subsequently interpolated.The proposed ROM interpolates directly AIC matrices (AIC-ROM) instead of pressures.The advantages of a ROM based on AIC matrices over similar approaches based on pressure coefficients are explained.Similarly to the Doublet Lattice Method, the 3D panel code is able to compute frequency based unsteady Aerodynamic Influence Coefficient (AIC) matrices, which are approximated by a "physical" Rational Functions (RFA) to make them amenable for time domain simulations.Unlike other approaches, the physical RFA allows a clear separation of quasi-steady, added mass and unsteady lag terms.Several application examples are presented and their particular needs are addressed.The proposed modelling approach supports flight dynamics by including previously neglected aerodynamic roll yaw coupling and nonlinear angle of attack dependencies, manoeuvre loads, including aeroelastic deformations, and gust loads analyses, including unsteady aerodynamics in one integrated model and is suitable for for investigations regarding active gust and manoeuvre load alleviation, primary flight control design, or performance improvement through lift redistribution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reduction of stiffness and mass matrices
GUYAN, R. J. (1965) · AIAA Journal · doi:10.2514/3.2874 · Cited by 2,642
Albano, E. D., & Rodden, W. P. (1969) · AIAA Journal · doi:10.2514/3.5086 · Cited by 990
Interpolation using surface splines.
HARDER, R. L., & DESMARAIS, R. N. (1972) · Journal of Aircraft · doi:10.2514/3.44330 · Cited by 770
Zimmermann, R., & Görtz, S. (2012) · The Aeronautical Journal · doi:10.1017/s0001924000007491 · Cited by 47
Comparing Aerodynamic Models for Numerical Simulation of Dynamics and Control of Aircraft
Sequeira, C., Willis, D. J., & Peraire, J. (2006) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2006-1254 · Cited by 31
Cited by
Digital Twins: State of the art theory and practice, challenges, and open research questions
Sharma, A., Kosasih, E., Zhang, J., Brintrup, A., & Calinescu, A. (2022) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2022.100383 · Cited by 587
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Machine learning in aerodynamic shape optimization
Li, J., Du, X., & Martins, J. R. R. A. (2022) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2022.100849 · Cited by 354
Effective adjoint approaches for computational fluid dynamics
Kenway, G. K. W., Mader, C. A., He, P., & Martins, J. R. R. A. (2019) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2019.05.002 · Cited by 331
Elahi, M., Afolaranmi, S. O., Martinez Lastra, J. L., & Perez Garcia, J. A. (2023) · Discover Artificial Intelligence · doi:10.1007/s44163-023-00089-x · Cited by 303
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Automated fiber placement: A review of history, current technologies, and future paths forward
Brasington, A., Sacco, C., Halbritter, J., Wehbe, R., & Harik, R. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100182 · Cited by 264
Metadata
- Published
- 2018-01-07
- OpenAlex
- W4253254723
- Cited by
- 295
- References
- 5
- Type
- paratext
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.