Flaking corn: processing mechanics, quality standards, and impacts on energy availability and performance of feedlot cattle
The DOI matches its Crossref record.
Abstract
Based on performance of feedlot cattle, steam flaking increases the value of corn by 18%, considerably more than is suggested by tabular values. Tabular values underestimate the energy availability of flaked corn by failing to account for digestibility of the nonstarch OM that is increased by flaking by the same magnitude (10%) as starch. Correcting for improvement in digestibility of nonstarch OM increases the NEg value of steam-flaked corn to 1.70 Mcal/kg, a value very close to values calculated from cattle performance trials. Digestibility of starch from corn grain is limited by the protein matrix that encapsulates starch granules, and by the compact nature of the starch itself. Disruption of the protein matrix (by shear forces on hot grain during flaking) is the first limiting step toward optimizing starch digestion. Five critical production factors influence the quality of steam-flaked corn: steam chest temperature, steaming time, roll corrugation, roll gap, and roll tension. For optimal shear, it is important that rolls be hot and that kernels be hot when flaked. Steam chests should be designed to allow a steaming time of at least 30 min at maximum roller mill capacity producing a flake of 0.31 kg/L (24 lb/bushel). As little as 5% moisture uptake during steaming appears adequate. The rate of flaking and distribution of kernels across the rolls also are critical. Quality standards for steam-flaked corn include measurements of flake thickness, flake density, starch solubility, and enzyme reactivity. Flake density, the most common quality standard, closely associated with starch solubility (r2 = 0.87) and enzyme reactivity (r2 = 0.79), still explains only 63% of the variability in percentage fecal starch and 52% of the variability in starch digestibility. Direct determination of fecal starch can explain 91% of the variability in starch digestion. The NEg value of corn can be predicted from fecal starch: NEg= 1.78 - 0.0184FS. Starch digestion is a Kappa Curve function of hot flake density, reaching a maximum at a flake density of approximately 0.31 kg/L. Flaking to a density of less than 0.31 kg/L, though increasing starch solubility, may reduce DMI, increase variability of weight gain among animals within a pen, and predispose cattle to acidosis and bloat without increasing starch digestion. We recommend that the steam-flaking process be optimized on the basis of fecal starch analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nair, J., Xu, S., Smiley, B., Yang, H.-E., McAllister, T. A., & Wang, Y. (2019) · Journal of Animal Science · doi:10.1093/jas/skz333 · Cited by 36
Varma, V. S., Shabtay, A., Yishay, M., Mizrahi, I., Shterzer, N., Freilich, S., Medina, S., Agmon, R., & Laor, Y. (2018) · Frontiers in Sustainable Food Systems · doi:10.3389/fsufs.2018.00033 · Cited by 12
Metadata
- Authors
- Zinn, R. A., Owens, F. N., & Ware, R. A.
- Venue
- Journal of Animal Science
- Publisher
- Oxford University Press (OUP)
- Published
- 2002-05-01
- Volume
- 80
- Issue
- 5
- Pages
- 1145-1156
- ISSN
- 0021-8812 (ISSN-L)
- 1525-3163
- OpenAlex
- W6869812
- Cited by
- 281
- References
- 0
- FWCI
- 7.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.