CoChat

NM-Series of Representative Manufactured Nanomaterials - Zinc Oxide NM-110, NM-111, NM-112, NM-113: Characterisation and Test Item Preparation

Singh Charanjeet, Steffi Friedrichs, Levin Michael, Birkedal Rene, Jensen Keld Astrup, Giulio Pojana, Wohlleben Wendel, Stefan Schulte, Karin Wiench, Terence W. Turney, D Koulaeva, Marshall Damian, Kerstin Hund‐Rinke, W Koerdel, Van Doren E, Pieter-Jan De Temmerman, Abi Daoud Francisco M, Jan Mast, P.N. Gibson, Robert Koeber, LINSINGER Thomas, Klein Christoph · 2011 · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft)
Cited by 59

The DOI matches its OpenAlex record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

The European Commission Joint Research Centre (JRC) provides scientific support to European Union policy regarding nanotechnology. Over the last three years, the JRC, in collaboration with international public and private partners, focused part of its work on establishing and applying a priority list (NM-Series) of Representative Manufactured Nanomaterials (RMNs) in support of one of the most comprehensive nanomaterial research programmes that is currently being carried out: the Organisation for Economic Co-operation and Development’s (OECD) Working Party on Manufactured Nanomaterials (WPMN) Sponsorship Programme; this collaborative programme ultimately enables the development and collection of data on characterisation, measurement, toxicological and eco-toxicological testing, as well as risk assessment and safety evaluation of nanomaterials (NMs). It is of utmost timely importance to make representative nanomaterials available to the international scientific community, in order to enable innovation and development of safe materials and products.\nThe present report describes the characterisation of NM-110, NM-111, NM-112, and NM-113, RMN Zinc Oxide substances, originating from defined batches of commercially manufactured material, respectively. The NM-Series materials were subsampled in collaboration with Fraunhofer Institute for Molecular and Applied Ecology (Fh IME), in order to be made available for measurement and testing for hazard identification, risk and exposure assessment studies. The results for more than 15 endpoints are addressed in the present report, including physical-chemical properties, such as size and size distribution, crystallite size and electron microscopy images. Sample and test item preparation procedures are addressed. The RMNs are studied by a number of international laboratories.\nThe properties of the Zinc Oxide RMNs NM-110, NM-111, NM-112, and NM-113 studied and described in this report demonstrate their relevance for use in measurement and testing studies of nanomaterials. The studies were performed in close collaboration between the PROSPECT consortium partners, the JRC, the Fraunhofer Institute for Molecular and Applied Ecology (Fh-IME), BASF AG Ludwigshafen, LGC standards, the National Physical Laboratory (NPL) as national metrology institute of the United Kingdom, the National Research Centre for the Working Environment, Denmark, CSIRO and the National Measurement Institute of Australia.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

OpenAlex · 10.2787/55008

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 59

Metadata

Authors
Charanjeet, S., Friedrichs, S., Michael, L., Rene, B., Astrup, J. K., Pojana, G., Wendel, W., Schulte, S., Wiench, K., Turney, T. W., Koulaeva, D., Damian, M., Hund‐Rinke, K., Koerdel, W., Van Doren, E., Temmerman, P.-J. D., Abi Daoud Francisco, M., Mast, J., Gibson, P. N., Koeber, R., Thomas, L., & Christoph, K.
Venue
Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft)
Publisher
Fraunhofer-Gesellschaft
Published
2011-01-01
OpenAlex
W1605083079
Cited by
59
References
1
FWCI
1.48
Type
book
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.