Heavy Metal Removal Investigation in Conventional Activated Sludge Systems
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The combination of industrial and domestic wastewater in municipal WWTPs (waste water treatment plants) may be economically profitable, but it increases the difficulty of treatment, and also has some detrimental effects on the biomass and causes a low-quality final effluent. The present study evaluates the treatment process both in the presence and absence of heavy metals using ASM3 (activated sludge model no.3) so as to improve the model by means of incorporating other novel inhibitory kinetic and settler models. The results reveal that the presence of heavy metal, a case study for copper and cadmium at a concentration of 0.7 mgL−1 in a biological treatment system has a negative effect on heterotrophic bacteria concentration by 25.00 %, and 8.76 % respectively. Meanwhile, there are no important changes in COD (chemical oxygen demand), SS (total suspended solids) and TN (total nitrogen) in the final effluent in the conventional system. However, all these parameters are acceptable and consistent with EU Commission Directives. The results indicate that ASM3 can predict and provide an opportunity of the operation for an activated sludge wastewater treatment plant that receives the effluent from an industrial plant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703 · cited 1×
“Among them the most frequently studied technologies are ion-exchange, adsorption and membrane filtration [1].”
BackgroundHuman Health Risk Assessment of Heavy Metals in Urban Stormwater
Ma, Y., Egodawatta, P., McGree, J., Liu, A., & Goonetilleke, A. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.03.067 · Cited by 217 · cited 1×
“The effect on the wastewater treatment process is mainly the direct impact on the metabolism of microorganisms, but in the case of human beings the focus is mostly on the nervous system and cells [2, 3].”
Background
Cited by
Mustafa, H. M., & Hayder, G. (2021) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2020.05.009 · Cited by 301
Ugwu, E. I., Othmani, A., & Nnaji, C. C. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03560-3 · Cited by 105
“But nickel (Ni), chromium (Cr), iron (Fe), cadmium (Cd), lead (Pb), zinc (Zn), mercury (Hg), and copper (Cu) are the most preponderant in industrial wastewater (Buaisha et al. 2020).”
BackgroundThermokinetic study of residual solid digestate from anaerobic digestion
Akor, C. I., Osman, A. I., Farrell, C., McCallum, C. S., John Doran, W., Morgan, K., Harrison, J., Walsh, P. J., & Sheldrake, G. N. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127039 · Cited by 69
Metadata
- Authors
- Buaisha, M., Balku, S., & Yaman, Š. Ö.
- Venue
- Civil Engineering Journal
- Publisher
- Ital Publication
- Published
- 2020-03-01
- Volume
- 6
- Issue
- 3
- Pages
- 470-477
- ISSN
- 2476-3055 (ISSN-L)
- 2676-6957
- OpenAlex
- W3010005448
- Cited by
- 191
- References
- 2
- FWCI
- 8.98
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heavy Metal Removal Investigation in Conventional Activated Sludge Systems. https://app.cochat.ai/papers/10.28991/cej-2020-03091484
- The paper
- Buaisha, M., Balku, S., & Yaman, Š. Ö. (2020). Heavy Metal Removal Investigation in Conventional Activated Sludge Systems. Civil Engineering Journal. https://doi.org/10.28991/cej-2020-03091484
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.