ENERGY FROM BIOMASS IN PULP AND PAPER MILLS
Open accessThe DOI matches its Crossref record.
Abstract
Pulp and paper mills generate various quantities of energy-rich biomass as wastes, depending on technological level, pulp and paper grades and wood quality. These wastes are produced in all stages of the process: wood preparation, pulp and paper manufacture, chemical recovery, recycled paper processing, waste water treatment. Energy recovery from wastes of different origin has become a generally accepted alternative to their disposal. Pulp and paper industry expresses an interest in adapting and integrating advanced biomass energy conversion technologies into its mill operations. Industrial adoption of these new technologies has the potential for higher efficiency, lower capital cost, and safer operation than conventional operations that burn fossil fuels for energy. Incineration with energy recovery has the advantage of hygienic disposal, volume reduction, and the recovery of thermal energy by means of steam or super heated water that can be used for heating and power generation. The paper reviews the current state and tendencies in using as a fuel of solid wastes generated in pulp and paper mills. A description of biomass-derived wastes regarding their opportunity to be used for energy recovery is presented. The heating properties of wood wastes, rejects from recycled paper processing, paper sludge, and low-quality recovered paper grades are discussed. Some aspects of emission of greenhouse gases (GHG) are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ligninolytic enzymes and its mechanisms for degradation of lignocellulosic waste in environment
Kumar, A., & Chandra, R. (2020) · Heliyon · doi:10.1016/j.heliyon.2020.e03170 · Cited by 648
Pollutants released from the pulp paper industry: Aquatic toxicity and their health hazards
Singh, A. K., & Chandra, R. (2019) · Aquatic Toxicology · doi:10.1016/j.aquatox.2019.04.007 · Cited by 348
Gaur, V. K., Sharma, P., Sirohi, R., Awasthi, M. K., Dussap, C.-G., & Pandey, A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123019 · Cited by 268
Demetrious, A., & Crossin, E. (2019) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-019-00842-4 · Cited by 179
Faubert, P., Barnabé, S., Bouchard, S., Côté, R., & Villeneuve, C. (2016) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.01.007 · Cited by 159
Metadata
- Authors
- Gavrilescu, D.
- Venue
- Environmental Engineering and Management Journal
- Publisher
- OAIMDD - EcoZone Publishing House
- Published
- 2008
- Volume
- 7
- Issue
- 5
- Pages
- 537-546
- ISSN
- 1582-9596 (ISSN-L)
- 1843-3707
- OpenAlex
- W816843510
- Cited by
- 163
- References
- 0
- FWCI
- 8.43
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.