Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 403

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Effectiveness of Portland Cement and Lime in Stabilizing Clay Soils

Prusinski, Jan R., Bhattacharja, Sankar · 1999 · Transportation Research Record: Journal of the Transportation Research Board

Abstract

Pavement subgrades constructed with clay soils can cause significant pavement distress because of moisture-induced volume changes and low subgrade support values. Lime is well known for its ability to stabilize plastic clays; however, portland cement also provides highly effective clay stabilization, usually with the added benefit of higher strength gain. Stabilizing clays with cement or lime can improve subgrade properties at a lower cost than either removing and replacing material or increasing the base thickness to reduce subgrade stress. The clay soil stabilization mechanism for the calcium-based stabilizers portland cement and lime is reviewed. These materials modify soil properties through cation exchange, flocculation and agglomeration, and pozzolanic reaction. Additionally, cement provides hydration products, which increase the strength and support values of the subgrade materials as well as enhance the permanence of the treatment. Comparative laboratory and field performance studies by others, focusing on stabilization of clay soils with portland cement or lime, are critically reviewed. Several factors affecting stabilization are discussed, including stabilizer test procedures, dosage effects to soil properties, mixing, compaction, and gradation and pulverization. Additionally, durability of cement and lime as stabilizers is reviewed, including wetting and drying, freezing and thawing, leaching, and long-term field performance. The research reviewed indicates that, if proportioned and applied properly, both cement and lime can effectively improve the engineering properties of clay soils over the life of a pavement. The results presented provide a guide to the engineer about the property changes to expect when using portland cement and lime with regard to volume stability, strength, and durability.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3141/1652-28

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 403

Metadata

Authors
Prusinski, J. R., & Bhattacharja, S.
Venue
Transportation Research Record: Journal of the Transportation Research Board
Published
1999-01
Volume
1652
Issue
1
Pages
215-227
ISSN
  • 0361-1981 (ISSN-L)
  • 2169-4052
OpenAlex
W2097817086
Cited by
403
References
2
FWCI
4.12
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.