The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Characterization and Modeling of Pores and Surfaces in Cement Paste: :Correlations to Processing and Properties
Open accessAbstract
Cement-based materials have complex multi-component, multiscale structures that first form through chemical reaction and then continue to change with time.As with most classes of materials, the porosity of cement paste strongly influences its properties, including strength, shrinkage, creep, permeability and diffusion.Pores in cement paste range in size from nanometers to millimeters, and numerous investigations and models have been reported in the literature.This paper reviews some key concepts and models related to our understanding of the pore system and surface area.A major reason for the complexity of cement-based materials is that the principal reaction product, calcium silicate hydrate (C-S-H), forms with a significant volume fraction of internal, nanometer-scale pores.This gel pore system contains water that is also adsorbed to the solid surfaces, blurring the distinction between the solid phase and pores.The gel pore system changes not only with the chemical composition and extent of reaction, but also with changes in relative humidity, temperature, and applied load.Pores can be characterized by their surface area, size, volume fraction, saturation, and connectivity, but precise quantitative models are still not available.A useful approach for characterizing the structure of cement paste is to document the influence of time and external factors on structural changes.Scientific progress will be facilitated by the development of models that accurately describe the structure and use that structure to predict properties.This is particularly important because the composition and chemistry of commercial concretes is changing more rapidly than laboratory experimentation can document long-term properties such as durability.Some of the possible models are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Principles of Computerized Tomographic Imaging
Kak, A. C., & Slaney, M. (2001) · doi:10.1137/1.9780898719277 · Cited by 5,809
Cited by
Mechanisms of cement hydration
Bullard, J. W., Jennings, H. M., Livingston, R. A., Nonat, A., Scherer, G. W., Schweitzer, J. S., Scrivener, K. L., & Thomas, J. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.011 · Cited by 2,237
Self-citationNanotechnology in concrete – A review
Sanchez, F., & Sobolev, K. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.03.014 · Cited by 1,834
Comparison of methods for arresting hydration of cement
Zhang, J., & Scherer, G. W. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.003 · Cited by 793
Self-citationModeling and simulation of cement hydration kinetics and microstructure development
Thomas, J. J., Biernacki, J. J., Bullard, J. W., Bishnoi, S., Dolado, J. S., Scherer, G. W., & Luttge, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.10.004 · Cited by 489
Self-citationMicrostructural and bulk property changes in hardened cement paste during the first drying process
Maruyama, I., Nishioka, Y., Igarashi, G., & Matsui, K. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.007 · Cited by 284
Metadata
- Authors
- Jennings, H. M., Bullard, J. W., Thomas, J. J., Andrade, J. E., Chen, J. J., & Scherer, G. W.
- Venue
- Journal of Advanced Concrete Technology
- Publisher
- Japan Concrete Institute
- Published
- 2008
- Volume
- 6
- Issue
- 1
- Pages
- 5-29
- ISSN
- 1346-8014 (ISSN-L)
- 1347-3913
- OpenAlex
- W1974012341
- Cited by
- 249
- References
- 3
- FWCI
- 30.65
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.