Min-max Model Predictive Control of Nonlinear Systems: A Unifying Overview on Stability
Open accessThe DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Min-max model predictive control (MPC) is one of the few techniques suitable for robust stabilization of uncertain nonlinear systems subject to constraints. Stability issues as well as robustness have been recently studied and some novel contributions on this topic have appeared in the literature. In this survey, we distill from an extensive literature a general framework for synthesizing min-max MPC schemes with ana priori robust stability guarantee. First, we introduce a general predictionmodel that covers a wide class of uncertainties, which includes bounded disturbances as well as state and input dependent disturbances (uncertainties). Second, we extend the notion of regional input-to-state stability (ISS) in order to fit the considered class of uncertainties. Then, we establish that the standard min-max approach can only guarantee practical stability. We concentrate our attention on two different solutions for solving this problem. The first one is based on a particular design of the stage cost of the performance index, which leads to aH∞ strategy, while the second one is based on a dual-mode strategy. Under fairly mild assumptions both controllers guarantee ISS of the resulting closed-loop system.Moreover, it is shown that the nonlinear auxiliary control law introduced in [29] to solve theH∞ problem can be used, for nonlinear systems affine in control, in all the proposed min-max schemes and also in presence of state-independent disturbances. A simulation example illustrates the techniques surveyed in this article.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Constrained model predictive control: Stability and optimality
Mayne, D. Q., Rawlings, J. B., Rao, C. V., & Scokaert, P. O. M. (2000) · Automatica · doi:10.1016/s0005-1098(99)00214-9 · Cited by 8,736 · cited 4×
“As it is standard in MPC [35], the terminal ingredients are added to provide closed-loop stability as it can be seen in the following section.”
BackgroundInfluentialA survey of industrial model predictive control technology
Qin, S. J., & Badgwell, T. A. (2003) · Control Engineering Practice · doi:10.1016/s0967-0661(02)00186-7 · Cited by 5,099 · cited 1×
“Model Predictive Control (MPC) is a widely used technique for its facility of handling constraints and model uncertainties (see e.g. the books [3, 28, 44] and the survey papers [39, 7]).”
MethodPredictive Control With Constraints
Maciejowski, J. M. (2001) · Cambridge University Engineering Department Publications Database · Cited by 4,368
Lee, J. H., Kaisare, N. S., & García, C. E. (2007) · Springer eBooks · doi:10.1002/9781394333325.fmatter · Cited by 3,766
Predictive control with constraints
Camacho, E. F. (2003) · Automatica · doi:10.1016/s0005-1098(03)00056-6 · Cited by 3,530
On characterizations of the input-to-state stability property
Sontag, E. D., & Wang, Y. (1995) · Systems & Control Letters · doi:10.1016/0167-6911(94)00050-6 · Cited by 1,784 · cited 1×
“A regional version of ISS with respect to A [47, 10] is given in Appendix.”
BackgroundInput-to-state stability for discrete-time nonlinear systems
Jiang, Z.-P., & Wang, Y. (2001) · Automatica · doi:10.1016/s0005-1098(01)00028-0 · Cited by 1,424
Corriou, J.-P. (2004) · Process Control · doi:10.1007/978-1-4471-3848-8_16 · Cited by 1,271
Robust receding horizon control of constrained nonlinear systems
Michalska, H., & Mayne, D. Q. (1993) · IEEE Transactions on Automatic Control · doi:10.1109/9.262032 · Cited by 1,181 · cited 1×
“In this survey paper, we concentrate on two different possible solutions to avoid this problem: the first one is based on an H ∞ like cost of the performance index (see e.g. [30, 29, 31, 16]), while the second one is based on a dual-mode strategy [37, 5, 46, 45, 19, 23].”
MethodModel-Based Predictive Control: A Practical Approach
Rossiter, J. A. (2003) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,025
Cited by
Yu, S., Maier, C., Chen, H., & Allgöwer, F. (2013) · Systems & Control Letters · doi:10.1016/j.sysconle.2012.11.004 · Cited by 236
Quevedo, D. E., & Nesic, D. (2011) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2010.2095950 · Cited by 213
“, [15], [19]–[23], and also [24]–[27] where linear systems with polytopic constraints are studied.”
BackgroundRubagotti, M., Raimondo, D. M., Ferrara, A., & Magni, L. (2011) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2010.2074590 · Cited by 196
Self-citationA Distributionally Robust Optimization Based Method for Stochastic Model Predictive Control
Li, B., Tan, Y., Wu, A.-G., & Duan, G.-R. (2022) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2021.3124750 · Cited by 156
Kohler, J., Soloperto, R., Muller, M. A., & Allgower, F. (2021) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2020.2982585 · Cited by 19
“nsure these properties despite disturbances and/or uncertainty in the model is the topic of robust MPC. There exist sophisticated methods to account for uncertainty and disturbances using Min-Max MPC [4], scenario MPC [5], [6] and stochastic MPC [7], [8]. These schemes enjoy rigorous theoretical properties and can yie…”
BackgroundMethodInfluential
Metadata
- Authors
- Raimondo, D. M., Limon, D., Lazar, M., Magni, L., & ndez Camacho, E. F.
- Venue
- European Journal of Control
- Publisher
- Elsevier BV
- Published
- 2009-01
- Volume
- 15
- Issue
- 1
- Pages
- 5-21
- ISSN
- 0947-3580 (ISSN-L)
- OpenAlex
- W2070768496
- Cited by
- 238
- References
- 44
- FWCI
- 17.83
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.