The DOI matches its Crossref record.
Role of nickel in the oxidation of Fe–Cr–Ni alloys in air–water vapour atmospheres
Abstract
A series of experimental austenitic alloys has been produced in which the nickel content ranges from 14 to 43%, with constant levels of 20%Cr, 1%Mn and 0.5%Si. A combination of isothermal, discontinuous and cyclic oxidation testing has been used to elucidate the performance in dry air and in air with 10%, 45% or 62% water vapour at 700°C and 1000°C. Evaluation was by means of thermogravimetry, surface analysis with glow discharge optical emission spectroscopy and scanning electron microscopy.Nickel is shown to have several roles: it accelerates the kinetics of chromia formation yet suppresses chromia spallation at 700°C. At 1000°C, it strongly decreases the breakaway oxidation and spalling associated with iron oxide formation. This effect is particularly marked in environments containing water vapour, where the material loss may be decreased 10-fold by an increase in the nickel content. Results correlate to thermodynamic and kinetic data which show nickel to increase the chromium activity and diffusivity in the alloy.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Previous studies have shown that an increased amount of Ni is beneficial for the primary protection and the mitigation of breakaway corrosion (see e.g. [5,8,26,37,38]).”
From The influence of Nickel on the corrosion protection of FeCrNi alloys after breakaway corrosion at 600 °C (2024) · cites this paper as [37]
In the citing paper
“Peraldi and Pint [9] and R.F.A. Pettersson et al. [41,42] studied the influence of Ni at higher Ni contents (10-30 wt% Ni and 14-78 % Ni respectively) in presence of water vapor at 650-800 • C.”
From Beyond breakaway corrosion – Influence of chromium, nickel and aluminum on corrosion of iron-based alloys at 600 °C (2020) · cites this paper as [41]
Citations
Cited by
Sorted by citations
Persdotter, A., Eklund, J., Liske, J., & Jonsson, T. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108961 · Cited by 44
Persdotter, A., Larsson, H., Eklund, J., Bigdeli, S., & Jonsson, T. (2024) · Corrosion Science · doi:10.1016/j.corsci.2024.112473 · Cited by 1
Metadata
- Authors
- Pettersson, R. F. A., Enecker, J., & Liu, L.
- ORCID
- Pettersson, R.F.A.
- Venue
- Materials at High Temperatures
- Publisher
- Maney Publishing
- Published
- 2005-08-15
- Volume
- 22
- Issue
- 3
- Pages
- 269-281
- ISSN
- 0960-3409 (ISSN-L)
- OpenAlex
- W4247076815
- Cited by
- 14
- References
- 0
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 2 · 2021: 2 · 2020: 1 · 2017: 1 · 2014: 1 · 2012: 1
- FWCI
- 0.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Materials at High Temperatures (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Keywords
- nickel, Fe-Cr-Ni alloys, oxidation, high-temperature corrosion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
