CoChat

Characteristics of Cellulose, Hemicellulose and Lignin of MD2 Pineapple Biomass

Open access
Adila Maisyarah Mansor, Jeng Shiun Lim, Farid Nasir Ani, Haslenda binti Hashim, Wai Shin Ho · 2019 · Chemical engineering transactions
Cited by 168

The DOI matches its OpenAlex record.

Abstract

Three main lignocellulosic components (lignin, cellulose and hemicellulose) are major plant cell walls. Their content in biomass crops, for example, MD2 pineapple waste will affect the heating values (HHV) if uses as a feedstock for the solid biofuel (biocoke). The aim of this paper is to identify the amount of lignocellulosic content in the MD2 pineapple waste and its effect on heating value. The experiment and parameters setup were carried out by following the chemical composition determination of standard methods. The process involved the sample preparation and treatment process by using NaOH and sodium chlorite for bleaching purposes. The effect of a percent of the lignocellulosic content in the MD2 pineapple waste before and after bleaching process towards heating value was studied. From the result, lignocellulosic in leaves (Cellulose 30 wt%, Hemicellulose 37 wt% and Lignin 22 wt%) showed the similarities (slightly higher and lower) content compared to the stem (Cellulose 46 wt%, Hemicellulose 29 wt% and Lignin 17 wt%) and root (Cellulose 42 wt%, Hemicellulose 32 wt% and Lignin 19 wt%). The majority of the leaves for the whole non-woody plant will give the cumulative effects since the quantity of stem and root is only about 15 % of the total weight of the plant. The cellulose and hemicellulose produce different thermal stability due to their different chemical structure even though they are both polysaccharides. From the data, all parts of MD2 pineapple has high cellulose and hemicellulose content. The hemicellulose can indicate the ignition temperature and time to ignite of the biocoke product produce by MD2 pineapple waste same goes to the cellulose content. The decomposition of lignin from start to end of the burning process can be an indicator that the biocoke product produces from MD2 pineapple waste can withstand up until 900 °C or above with some additional reactor or chemical that can enhance its thermal properties.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

OpenAlex · 10.3303/cet1972014

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Mansor, A. M., Lim, J. S., Ani, F. N., Hashim, H. B., & Ho, W. S.
Venue
Chemical engineering transactions
Publisher
AIDIC-Italian Association of Chemical Engineering
Published
2019-01-01
ISSN
1974-9791 (ISSN-L)
OpenAlex
W2956476237
Cited by
168
References
0
FWCI
6.47
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.