The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Estimation and Comparison of Bio-Oil Components from Different Pyrolysis Conditions
Open accessAbstract
In the case of development and utilization of bio-oils, a quantitative chemical characterization is necessary to evaluate its actual desired characteristics for downstream production. This paper describes an analytical approach for the determination of families of lightweight chemicals from bio-oils by using GC-MS techniques. And on this basis, new explorations in the field of influence factors, such as feedstocks, pyrolysis temperatures, and low temperature pretreatment, on the composition and products yields of bio-oil were further investigated. Up to 40% (wt.%) of the bio-oil is successful quantified by the current method. Chemical functionalities in the bio-oil correlates strongly with the original feedstocks because of their different chemical compositions and structure. Pyrolysis temperature plays a vital role in the yields of value-added compounds, both overall and individually. Higher temperature favored the generation of small aldehydes and acids, accompanied by a reduction of phenols. The optimal temperatures for maximum furans and ketones yields were 520 oC and 550 oC, respectively. The low temperature pretreatment of biomass has a good enrichment for the lightweight components of the bio-oils. In this case, much higher amounts of compounds, such as furans, ketones, and phenols were produced. Such a determination would contribute greatly to a deeper understanding of the chemical efficiency of the pyrolysis reaction and how the bio-oils could be more properly utilized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Influence of inorganic salts on the primary pyrolysis products of cellulose
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.112 · Cited by 799
Cited by
A Critical Review on Hemicellulose Pyrolysis
Zhou, X., Li, W., Mabon, R., & Broadbelt, L. J. (2017) · Energy Technology · doi:10.1002/ente.201600327 · Cited by 419
Lignocellulosic Agricultural Waste Valorization to Obtain Valuable Products: An Overview
Blasi, A., Verardi, A., Lopresto, C. G., Siciliano, S., & Sangiorgio, P. (2023) · Recycling · doi:10.3390/recycling8040061 · Cited by 338
Mozhiarasi, V., & Natarajan, T. S. (2025) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02352-0 · Cited by 188
Recent Progress in Quantum Chemistry Modeling on the Pyrolysis Mechanisms of Lignocellulosic Biomass
Hu, B., Zhang, B., Xie, W.-L., Jiang, X.-Y., Liu, J., & Lu, Q. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01948 · Cited by 161
Industrial hemp by-product valorization
Moliterni, V. M. C., Pojić, M., & Tiwari, B. (2022) · Industrial Hemp · doi:10.1016/b978-0-323-90910-5.00007-5 · Cited by 9
Metadata
- Authors
- Lyu, G., Wu, S., & Zhang, H.
- Venue
- Frontiers in Energy Research
- Publisher
- Frontiers Media SA
- Published
- 2015-06-15
- Volume
- 3
- ISSN
- 2296-598X (ISSN-L)
- OpenAlex
- W1574430524
- Cited by
- 193
- References
- 3
- FWCI
- 2.99
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Estimation and Comparison of Bio-Oil Components from Different Pyrolysis Conditions. https://app.cochat.ai/papers/10.3389/fenrg.2015.00028
- The paper
- Lyu, G., Wu, S., & Zhang, H. (2015). Estimation and Comparison of Bio-Oil Components from Different Pyrolysis Conditions. Frontiers in Energy Research. https://doi.org/10.3389/fenrg.2015.00028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.