The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lignin as Alternative Reinforcing Filler in the Rubber Industry: A Review
Open accessAbstract
Lignin has a potential reinforcing filler and alternative to carbon black in rubber industry. This is due to cheaper materials, abundant with yearly renewable source, low weight, high biological efficiency and wide ecological adaptability. Utilization of bio-filler in rubber industry has increased more attention among the researchers due to increasing environmental concerns and toxicological effect of carbon black towards health and environment. This article is intended to summarize the current efforts in development of green and sustainable of rubber product. Instead of focused to silica and alternative rubber matrix like guayule and Russian dandelion, lignin also has potential as reinforcing filler and lead to development of competitive green rubber composites. Lignin has several special properties such as good mechanical, physico-chemical, biodegradability, antioxidant and excellent thermal stability. However, incorporation of lignin in rubber matrix is not a straightforward and needs to overcome with certain suitable solution because of the polarity of lignin molecules which contribute to strong self-interactions. Consequently, chemical modification of lignin is often used to improve the dispersion of lignin in elastomers, or compatibilizer is added to enhance interfacial of adhesion between lignin and rubber matrix. This review attempts to compile relevant knowledge about the performance of lignin-filled rubber composite from different approach such as mixing method, surface modification, hybrid filler etc. This study is expected to gain significance interest of researcher globally on the subject of lignin-based rubber composites and the advancement of development in green rubber product.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Antibacterial properties of hemp hurd powder against E. coli
Khan, B. A., Wang, J., Warner, P., & Wang, H. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41588 · Cited by 163
Cited by
Multifunctional lignin-based nanocomposites and nanohybrids
Lizundia, E., Sipponen, M. H., Greca, L. G., Balakshin, M., Tardy, B. L., Rojas, O. J., & Puglia, D. (2021) · Green Chemistry · doi:10.1039/d1gc01684a · Cited by 293
Metadata
- Authors
- Mohamad Aini, N. A., Othman, N., Hussin, M. H., Sahakaro, K., & Hayeemasae, N.
- Venue
- Frontiers in Materials
- Publisher
- Frontiers Media SA
- Published
- 2020-01-08
- Volume
- 6
- ISSN
- 2296-8016 (ISSN-L)
- OpenAlex
- W3000028063
- Cited by
- 160
- References
- 2
- FWCI
- 5.16
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lignin as Alternative Reinforcing Filler in the Rubber Industry: A Review. https://app.cochat.ai/papers/10.3389/fmats.2019.00329
- The paper
- Mohamad Aini, N. A., Othman, N., Hussin, M. H., Sahakaro, K., & Hayeemasae, N. (2020). Lignin as Alternative Reinforcing Filler in the Rubber Industry: A Review. Frontiers in Materials. https://doi.org/10.3389/fmats.2019.00329
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.