Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 14 of the 17 references it cites were found in a registry or an index, and 2 are not checked yet.

Development of Hollow Cathodes for Space Electric Propulsion at Sitael

Open access

Abstract

Hollow cathodes are electron sources used for the gas ionization and the beam neutralization in both ion and Hall effect thrusters (HETs). A reduction of power and propellant consumption from the cathode is particularly needed in small satellite applications, where power and mass budgets are inherently limited. Concurrently, the interest in high-power HETs is increasingly fostered for a number of space applications, including final positioning and station-keeping of Geostationary Earth Orbit (GEO) satellites, spacecraft transfers from Low Earth Orbit (LEO) to GEO, and deep-space exploration missions. As such, several hollow cathodes have been developed and tested at Sitael, each conceived for a specific power class of thrusters. A numerical model was used during the cathode design to define the geometry, in accordance with the thruster unit specifications in terms of discharge current, mass flow rate, and lifetime. Lanthanum hexaboride (LaB6) hollow cathodes were successfully developed for HETs with discharge power ranging from 100 W to 20 kW. Experimental campaigns were carried out in both stand-alone and coupled configurations, to verify the operation of the cathodes and validate the numerical model. The comparison between experimental and theoretical results are presented, offering a sound framework to drive the design of future hollow cathodes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/aerospace4020026

Cites

14 of 16 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 General schematic of an orificed hollow cathode. Figure 1. General schematic of an orificed hollow cathode.
Figure 1 General schematic of an orificed hollow cathode. Figure 1. General schematic of an orificed hollow cathode.CC-BY · From the PDF
Figure 2 Comparison of the measured and computed HC1 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 1 A keeper current. Figure 2. Comparison of the measured and computed HC1 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 1 A keeper current.
Figure 2 Comparison of the measured and computed HC1 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 1 A keeper current. Figure 2. Comparison of the measured and computed HC1 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 1 A keeper current.CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Figure 4 HC1 electrical characteristics comparison with and without a heater, at 0.1 mg/s Xe. Figure 4. HC1 electrical characteristics comparison with and without a heater, at 0.1 mg/s Xe. Figure 4. HC1 electrical characteristics comparison with and without a heater, at 0.1 mg/s Xe.
Figure 4 HC1 electrical characteristics comparison with and without a heater, at 0.1 mg/s Xe. Figure 4. HC1 electrical characteristics comparison with and without a heater, at 0.1 mg/s Xe. Figure 4. HC1 electrical characteristics comparison with and without a heater, at 0.1 mg/s Xe.CC-BY · From the PDF
Figure 6 Comparison of the measured and computed HC3 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 3 A keeper current. Figure 6. Comparison of the measured and computed HC3 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 3 A keeper current.
Figure 6 Comparison of the measured and computed HC3 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 3 A keeper current. Figure 6. Comparison of the measured and computed HC3 internal pressure: ( a ) Room conditions; ( b ) Cathode operating with 3 A keeper current.CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Image 8
CC-BY · From the PDF
( b ) 0.1 mg/s Xe. Figure 8. Comparison of electrical characteristics of HC3 with the theoretical results: ( a ) 0.08 mg/s Xe; ( b ) 0.1 mg/s Xe. Figure 8. Comparison of electrical characteristics of HC3 with the theoretical results: ( a ) 0.08 mg/s Xe; ( b ) 0.1 mg/s Xe. Figure 8. Comparison of electrical characteristics of HC3 with the theoretical results: ( a ) 0.08 mg/s Xe; ( b ) 0.1 mg/s Xe.
( b ) 0.1 mg/s Xe. Figure 8. Comparison of electrical characteristics of HC3 with the theoretical results: ( a ) 0.08 mg/s Xe; ( b ) 0.1 mg/s Xe. Figure 8. Comparison of electrical characteristics of HC3 with the theoretical results: ( a ) 0.08 mg/s Xe; ( b ) 0.1 mg/s Xe. Figure 8. Comparison of electrical characteristics of HC3 with the theoretical results: ( a ) 0.08 mg/s Xe; ( b ) 0.1 mg/s Xe.CC-BY · From the PDF
Figure 10 HC20 characterization at 1 mg/s Xe and 2 A keeper current: ( a ) Keeper voltage vs. anode current; ( b ) Anode voltage vs. anode current. Figure 10. HC20 characterization at 1 mg/s Xe and 2 A keeper current: ( a ) Keeper voltage vs. anode current; ( b ) Anode voltage vs. anode current.
Figure 10 HC20 characterization at 1 mg/s Xe and 2 A keeper current: ( a ) Keeper voltage vs. anode current; ( b ) Anode voltage vs. anode current. Figure 10. HC20 characterization at 1 mg/s Xe and 2 A keeper current: ( a ) Keeper voltage vs. anode current; ( b ) Anode voltage vs. anode current.CC-BY · From the PDF
Image 11
CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Figure 13 HC20 during operation with HT5k. Figure 13. HC20 during operation with HT5k. Figure 13. HC20 during operation with HT5k. Figure 13. HC20 during operation with HT5k.
Figure 13 HC20 during operation with HT5k. Figure 13. HC20 during operation with HT5k. Figure 13. HC20 during operation with HT5k. Figure 13. HC20 during operation with HT5k.CC-BY · From the PDF
Figure 14 HC60 pressure at room conditions (Xe and Kr). Figure 14. HC60 pressure at room conditions (Xe and Kr).
Figure 14 HC60 pressure at room conditions (Xe and Kr). Figure 14. HC60 pressure at room conditions (Xe and Kr).CC-BY · From the PDF
Image 15
CC-BY · From the PDF
Figure 16 HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe. Figure 16. HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe. Figure 16. HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe. Figure 16. HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe.
Figure 16 HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe. Figure 16. HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe. Figure 16. HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe. Figure 16. HC60 experimental and theoretical electrical characteristics with the anode operating and the keeper off at 5 mg/s Xe.CC-BY · From the PDF
Figure 17 HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b Coupled with the thruster HT20k, operating with xenon. Figure 17. HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b ) Coupled with the thruster HT20k, operating with xenon. Figure 17. HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b ) Coupled with the thruster HT20k, operating with xenon. Figure 17. HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b ) Coupled with the thruster HT20k, operating with xenon.
Figure 17 HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b Coupled with the thruster HT20k, operating with xenon. Figure 17. HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b ) Coupled with the thruster HT20k, operating with xenon. Figure 17. HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b ) Coupled with the thruster HT20k, operating with xenon. Figure 17. HC60 during operation: ( a ) With 10 A keeper current, 38 A anode current, 3 mg/s Xe; ( b ) Coupled with the thruster HT20k, operating with xenon.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 17 references

Research works printed but not linked: 4

  1. Misuri, T., Ducci, C., Albertoni, R., Andrenucci, M., and Pedrini, D. (2015, January 4–10). Sitael Low Power Hall Effect Thrusters for Small Satellites. Proceedings of the Joint Conference of 30th International Symposium on Space Technology and Science, 34th International Electric Propulsion Conference and 6th Nano-satellite Symposium, Hyogo-Kobe, Japan.
  2. Ducci, C., Albertoni, R., and Andrenucci, M. (2013, January 6–10). HT100D Performance Evaluation and Endurance Test Results. Proceedings of the 33rd International Electric Propulsion Conference, Washington, DC, USA.
  3. Ducci, C., Andreussi, T., Arkhipov, A., Passaro, A., Andrenucci, M., Bulit, A., and Edwards, C. (2015, January 4–10). Investigation of a 5 kW Class Hall-Effect Thruster Operating with Different Xenon-Krypton Mixtures. Proceedings of the Joint Conference of 30th International Symposium on Space Technology and Science, 34th International Electric Propulsion Conference and 6th Nano-satellite Symposium, Hyogo-Kobe, Japan.
  4. Leporini, A., Giannetti, V., Andreussi, T., Pedrini, D., Rossodivita, A., Piragino, A., Andrenucci, M., and Estublier, D. (2016, January 2–6). Development of a 20 kW Class Hall Effect Thruster. Proceedings of the Space Propulsion 2016, Rome, Italy.

Cited by

See all 35

Metadata

Authors
Pedrini, D., Misuri, T., Paganucci, F., & Andrenucci, M.
Affiliations
  • SITAEL (Italy) (IT)
  • University of Pisa (IT)
Corresponding author
Pedrini, Daniela
Venue
Aerospace
Publisher
MDPI AG
Published
2017-05-06
Volume
4
Issue
2
Pages
26
ISSN
2226-4310 (ISSN-L)
OpenAlex
W2611630284
Cited by
33
References
17
Citations by year
2026: 2 · 2025: 2 · 2024: 1 · 2023: 4 · 2022: 6 · 2021: 6 · 2020: 4 · 2019: 5 · 2018: 3
FWCI
1.36
Type
journal article
Language
en
Open access
Locations
  • Aerospace (publishedVersion, cc-by)
  • CINECA IRIS Institutial research information system (University of Pisa) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-Pressure Plasma Processing and Diagnostics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Vacuum and Plasma Arcs
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Gyrotron and Vacuum Electronics Research
Keywords
hollow cathode, Hall thruster, ion thrusters, electron source, beam neutralization, gas ionization, lanthanum hexaboride, cathode design, small satellites, geostationary satellites, station keeping, numerical modeling, cathode lifetime

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Development of Hollow Cathodes for Space Electric Propulsion at Sitael. https://app.cochat.ai/papers/10.3390/aerospace4020026
The paper
Pedrini, D., Misuri, T., Paganucci, F., & Andrenucci, M. (2017). Development of Hollow Cathodes for Space Electric Propulsion at Sitael. Aerospace. https://doi.org/10.3390/aerospace4020026

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.