CoChat

Construction and Characteristic Analysis of Dynamic Stress Coupling Simulation Models for the Attitude-Adjustable Chassis of a Combine Harvester

Chai, Xiaoyu, Hu, Jinpeng, Ma, Tianle, Liu, Peng, Shi, Maolin, Zhu, Linjun, Zhang, Min, Xu, Lizhang · 2024 · Agronomy
Cited by 55

The DOI matches its Crossref record; the references it cites are not checked yet.

Abstract

The combine harvester equipped with attitude-adjustment functionality significantly enhances its adaptability to complex terrain but often struggles to maintain the reliability of its mechanisms. Therefore, investigating the dynamic load characteristics of the attitude-adjustment mechanism becomes imperative. This article employed the DEM–FMBD (Discrete Element Method–Flexible Multibody Dynamics) bidirectional coupling simulation method to establish a multibody dynamic model of a tracked combine harvester. The study delved into the interaction mechanism and dynamic stress response characteristics between the tracked chassis and the complex terrain under various height adjustments, lateral adjustment angles, longitudinal adjustment angles, and different field-ridge crossing methods. Finally, the accuracy of the coupled simulation model was validated through a constructed stress detection system. The research findings revealed that the displacement and tilt angle deviation of the hydraulic cylinders utilized to execute the chassis adjustment actions in the constructed coupled simulation model was less than 5%, and the deviation between the simulation results and the actual maximum dynamic stress under multiple working conditions ranged from 7% to 15%. This verification confirmed the effectiveness of the DEM–FMBD coupled simulation method. Under different adjustment conditions, the maximum stress position was consistently distributed in the same area of the left-front and left-rear rotating arms. The primary and secondary effects of the various parts of the adjustment mechanism on the overall reliability of the chassis were as follows: left front > right front > left rear > right rear. By implementing the middle height with the adjustment strategy, the dynamic stress extreme value of the adjustment mechanism can be effectively reduced by 21.98%, thereby enhancing the structural stability of the chassis.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/agronomy14081874

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

The citation lists haven’t been fetched yet

Cited by 55

Research works printed but not linked: 34

  1. Xin, 2023, Design and optimization of a new terrain-adaptive hitch mechanism for hilly tractors, Int. J. Agric. Biol. Eng., 16, 134
  2. Liu, 2022, Design and study on the leveling mechanism of the tractor body in hilly and mountainous areas, J. Eng. Des. Technol., 22, 679
  3. Sun, 2020, Development of a four-point adjustable lifting crawler chassis and experiments in a combine harvester, Comput. Electron. Agric., 173, 105416, 10.1016/j.compag.2020.105416 · doi:10.1016/j.compag.2020.105416
  4. Wang, X., Lv, X., He, L., and Wu, T. (2018, January 10–12). Design of a kind of automatic leveling device for crawler tractors. Proceedings of the 8th International Conference on Management and Computer Science (ICMCS 2018), Shenyang, China. · doi:10.2991/icmcs-18.2018.30
  5. Du, 2019, Design and field test of a new compact self-propelled cabbage harvester, Trans. ASABE, 62, 1243, 10.13031/trans.13327 · doi:10.13031/trans.13327
  6. Hu, J.P., Pan, J.H., Dai, B.W., Chai, X.Y., Sun, Y.X., and Xu, L.Z. (2022). Development of an attitude adjustment crawler chassis for combine harvester and Experiment of adaptive leveling system. Agronomy, 12. · doi:10.3390/agronomy12030717
  7. Sun, 2020, Design and physical model experiment of an attitude adjustment device for a crawler tractor in hilly and mountainous regions, Inf. Process. Agric., 7, 466
  8. Peng, 2018, Design and physical model experiment of body leveling system for roller tractor in hilly and mountainous region, Trans. CSAE, 34, 36
  9. Mocera, F., Somà, A., and Nicolini, A. (2020). Grousers effect in tracked vehicle multibody dynamics with deformable terrain contact model. Appl. Sci., 10. · doi:10.3390/app10186581
  10. Rauf, O., Ning, Y., Chen, M., and Ma, H.X. (2024). Evaluation of ground pressure, bearing capacity, and sinkage in rigid-flexible tracked vehicles on characterized terrain in laboratory conditions. Sensors, 24. · doi:10.20944/preprints202401.2189.v1
  11. Zhao, 2023, Fatigue life prediction of shearer rocker shell based on DEM-MFBD bidirectional coupling technology, Coal Sci. Tech., 51, 252
  12. Wang, 2024, The MFBD-DEM coupling simulation approach for the investigation of granules screening efficiency in 4-DOF Flip-Flow Screen, Granul. Matter, 26, 5, 10.1007/s10035-023-01380-5 · doi:10.1007/s10035-023-01380-5
  13. Si, 2023, Flexible gear modeling and stress spectrum compilation of an artillery steering machine, J. Phys. Conf. Ser., 2528, 012001, 10.1088/1742-6596/2528/1/012001 · doi:10.1088/1742-6596/2528/1/012001
  14. Khosravi, 2020, Discrete element model (DEM) simulations of cone penetration test (CPT) measurements and soil classification, Can. Geotech. J., 57, 1369, 10.1139/cgj-2019-0512 · doi:10.1139/cgj-2019-0512
  15. Zhao, 2020, The effect of various edge-curve types of plain-straight blades for strip tillage seeding on torque and soil disturbance using DEM, Soil Till. Res., 202, 104674, 10.1016/j.still.2020.104674 · doi:10.1016/j.still.2020.104674
  16. Shaikh, 2021, Discrete element method (DEM) simulation of single grouser shoe-soil interaction at varied moisture contents, Comput. Electron. Agric., 191, 106538, 10.1016/j.compag.2021.106538 · doi:10.1016/j.compag.2021.106538
  17. Zhao, 2023, Bionic threshing component optimized based on MBD-DEM coupling simulation significantly improves corn kernel harvesting rate, Comput. Electron. Agric., 212, 108075, 10.1016/j.compag.2023.108075 · doi:10.1016/j.compag.2023.108075
  18. Gan, 2023, Co-simulation of multibody dynamics and discrete element method for hydraulic excavators, Powder Technol., 414, 118001, 10.1016/j.powtec.2022.118001 · doi:10.1016/j.powtec.2022.118001
  19. Zhang, 2023, Analysis and construction of the coal and rock cutting state identification system in coal mine intelligent mining, Sci. Rep., 13, 3489, 10.1038/s41598-023-30617-9 · DOI
  20. Wang, 2024, Analysis of traction performance of deep-sea tracked mining vehicles under different grouser pitch-to-height ratios and traveling speeds, Ocean Eng., 297, 117112, 10.1016/j.oceaneng.2024.117112 · doi:10.1016/j.oceaneng.2024.117112
  21. Shaikh, S.A., Li, Y.M., Ma, Z., Chandio, F.A., Ahmad, F., Tunio, M.H., and Abbas, I. (2021). Effect of grouser height on the tractive performance of single grouser shoe under different soil moisture contents in clay loam terrain. Sustainability, 13. · doi:10.3390/su13031156
  22. Fu, 2023, Development and verification of adhesion models for track shoes operating on clay soils, Biosyst. Eng., 235, 69, 10.1016/j.biosystemseng.2023.09.009 · doi:10.1016/j.biosystemseng.2023.09.009
  23. Hu, J.P., Xu, L.Z., Yu, Y., Lu, J., Han, D.L., Chai, X.Y., Wu, Q.H., and Zhu, L.J. (2023). Design and experiment of bionic straw-cutting blades based on locusta migratoria manilensis. Agriculture, 13. · doi:10.3390/agriculture13122231
  24. Chen, 2020, Modal vibration response of rice combine harvester frame under multi-source excitation, Biosyst. Eng., 194, 177, 10.1016/j.biosystemseng.2020.04.002 · doi:10.1016/j.biosystemseng.2020.04.002
  25. Harkness, 1992, Finite element reliability analysis of fatigue life, Nucl. Eng. Des., 133, 209, 10.1016/0029-5493(92)90181-T · doi:10.1016/0029-5493(92)90181-t
  26. Zhu, 2024, Collaborative modeling-based improved moving Kriging approach for low-cycle fatigue life reliability estimation of mechanical structures, Reliab. Eng. Syst. Saf., 246, 110092, 10.1016/j.ress.2024.110092 · doi:10.1016/j.ress.2024.110092
  27. Tian, 2022, Reliability and fatigue life analysis of key parts of shearer, Eng. Fail. Anal., 138, 106357, 10.1016/j.engfailanal.2022.106357 · doi:10.1016/j.engfailanal.2022.106357
  28. Zhang, 2016, Analysis of Time-Dependent Reliability and Sensitivity of Vehicle Components, J. High. Transpor. Res. Dev., 10, 104
  29. Wu, 2023, Online estimation of fatigue damage of railway bogie frame based on axle box accelerations, Veh. Syst. Dyn., 61, 286, 10.1080/00423114.2022.2041204 · DOI
  30. Wang, 2021, Experiment and simulation study on the dynamic response of RC slab under impact loading, Shock. Vib., 2021, 7127793, 10.1155/2021/7127793 · doi:10.1155/2021/7127793
  31. Assogba, 2021, Effect of vehicle speed and overload on dynamic response of semi-rigid base asphalt pavement, Road Mater. Pavement Des., 22, 572, 10.1080/14680629.2019.1614970 · DOI
  32. Sun, J.B., Chu, H.J., Liu, Q., Luo, P.X., Yang, F.Z., and Liu, Z.J. (2022). Distribution of soil compaction stress during contour line operation of hillside crawler tractor. Trans. CSAM, 30–42.
  33. Jang, M.K., Hwang, S.J., and Nam, J.S. (2022). Simulation study for overturning and rollover characteristics of a tractor with an implement on a hard surface. Agronomy, 12. · DOI
  34. Jang, 2022, Overturning and rollover characteristics of a tractor through dynamic simulations: Effect of slope angle and obstacles on a hard surface, Biosyst. Eng., 219, 11, 10.1016/j.biosystemseng.2022.04.017 · doi:10.1016/j.biosystemseng.2022.04.017

Metadata

Authors
Chai, X., Hu, J., Ma, T., Liu, P., Shi, M., Zhu, L., Zhang, M., & Xu, L.
Venue
Agronomy
Publisher
MDPI AG
Published
2024-08-22
Volume
14
Issue
8
Pages
1874
ISSN
2073-4395
Cited by
55
Language
en
Funders
  • Jiangsu Agriculture Science and Technology Innovation Fund (JASTIF) (CX(21)2042, 2022SFGC0201, KYCX22_3678, BK20230544)
  • Shandong Province Key R&D Scheme (Science and Technology Demon-stration Project) Project (CX(21)2042, 2022SFGC0201, KYCX22_3678, BK20230544)
  • Jiangsu Province Postgraduate Research and Practice Innovation Scheme Project (CX(21)2042, 2022SFGC0201, KYCX22_3678, BK20230544)
  • Natural Science Foundation of Jiangsu Province (CX(21)2042, 2022SFGC0201, KYCX22_3678, BK20230544)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Construction and Characteristic Analysis of Dynamic Stress Coupling Simulation Models for the Attitude-Adjustable Chassis of a Combine Harvester. https://app.cochat.ai/papers/10.3390/agronomy14081874
The paper
Chai, X., Hu, J., Ma, T., Liu, P., Shi, M., Zhu, L., Zhang, M., & Xu, L. (2024). Construction and Characteristic Analysis of Dynamic Stress Coupling Simulation Models for the Attitude-Adjustable Chassis of a Combine Harvester. Agronomy. https://doi.org/10.3390/agronomy14081874

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.