The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Selection of the Informative Frequency Band in a Bearing Fault Diagnosis in the Presence of Non-Gaussian Noise—Comparison of Recently Developed Methods
Open accessAbstract
The vibration signals acquired on machines usually have complex spectral structure. As the signal of interest (SOI) is weak (especially at an early stage of damage) and covers some frequency range (around structural resonance), it requires its extraction from a raw observation. Until now, most of the techniques assumed the presence of Gaussian noise. Unfortunately, there are cases when the non-informative part of the signal (considered as the noise) is non-Gaussian due to the random disturbances or nature of the process executed by the machine. Thus, the problem can be formulated as the extraction of the SOI from the non-Gaussian noise. Recently this problem has been recognized by several authors and some new ideas have been developed. In this paper, we would like to compare these techniques for benchmark signals (Gaussian noise, cyclic impulsive signals, non-cyclic impulsive signals with random amplitudes and locations of impulses and a mixture of all of them). Our analysis will cover spectral kurtosis, kurtogram, stability index (Alpha selector), conditional variance-based selector, spectral Gini index, spectral smoothness index and infogram. Finally, a discussion on the efficiency of each method is provided.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Kurtosis feature can provide the information regarding the non-Gaussianity or impulsiveness of the vibration signals [68,69].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [69]
Citations
Cites
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744 · cited 3×
“According to the literature, damage signature covers some frequency range around structural resonance [18].”
BackgroundArtificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
A review on empirical mode decomposition in fault diagnosis of rotating machinery
Lei, Y., Lin, J., He, Z., & Zuo, M. J. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.09.015 · Cited by 1,886 · cited 1×
“Depending on the complexity of the structure of the signal one may use simple band-pass filtering, advanced decomposition via Empirical Mode Decomposition (EMD) [10,11] or wavelet transform [12–14].”
MethodMeasurement of Inequality of Incomes
Gini, C. (1921) · The Economic Journal · doi:10.2307/2223319 · Cited by 1,710 · cited 1×
“Gini index was originally proposed in economics [59] to measure the inequality of wealth and it has been recognized as a sparsity measure.”
BackgroundFast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601 · cited 4×
“One may find the usage of the filter bank for the signal decomposition, e.g., 1/3-binary tree structure [19].”
BackgroundMethodInfluentialWavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
The spectral kurtosis: a useful tool for characterising non-stationary signals
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.001 · Cited by 1,441 · cited 3×
“It is the most frequently used sparsity index in the diagnosis of bearing faults [45,52].”
MethodAntoni, J., & Randall, R. B. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.002 · Cited by 1,333 · cited 1×
“The problem of bearings local damage detection is widely discussed in the literature [1–4].”
BackgroundPeng, Z. K., & Chu, F. L. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00075-x · Cited by 1,192 · cited 1×
“Depending on the complexity of the structure of the signal one may use simple band-pass filtering, advanced decomposition via Empirical Mode Decomposition (EMD) [10,11] or wavelet transform [12–14].”
MethodFeng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998 · cited 1×
“The signal decomposition can be performed by the short-time Fourier transform (STFT) or many other techniques (Wavelets, Wigner, EMD, etc.), see, e.g., [53].”
Method
Research works printed but not linked: 1
- Salehzadeh, N.A., and Ferri, A.M. (2018). Vibration-Based Techniques For Damage Detection And Localization In Engineering Structures, World Scientific.
Cited by
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“Kurtosis feature can provide the information regarding the non-Gaussianity or impulsiveness of the vibration signals [68, 69].”
BackgroundChen, B., Cheng, Y., Zhang, W., Gu, F., & Mei, G. (2021) · ISA Transactions · doi:10.1016/j.isatra.2021.08.025 · Cited by 86
Zimroz, P., Trybała, P., Wroblewski, A. C., Góralczyk, M., Szrek, J., Wójcik, A., & Zimroz, R. (2021) · Energies · doi:10.3390/en14133725 · Cited by 78
Self-citationIGIgram: An Improved Gini Index-Based Envelope Analysis for Rolling Bearing Fault Diagnosis
Chen, B., Song, D., Cheng, Y., Zhang, W., Huang, B., & Muhamedsalih, Y. (2022) · Journal of Dynamics Monitoring and Diagnostics · doi:10.37965/jdmd.2022.65 · Cited by 64
“Theworks in [21,22,28,29] summarized and compared the performance of typical blind IFBImethods in bearing fault diagnosis.”
BackgroundSzurgacz, D., Zhironkin, S., Vöth, S., Pokorny, J., Spearing, A. J. S., Cehlár, M., Stempniak, M., & Sobik, L. (2021) · Energies · doi:10.3390/en14113258 · Cited by 60
Schmidt, S. P., Heyns, P. S., & Gryllias, K. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107771 · Cited by 56
Chen, B., Cheng, Y., Zhang, W., & Gu, F. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109165 · Cited by 55
Chen, B., Cheng, Y., Zhang, W., & Gu, F. (2021) · Measurement · doi:10.1016/j.measurement.2021.110448 · Cited by 55
Brusa, E. G. M., Delprete, C., & Maggio, L. G. D. (2021) · Applied Sciences · doi:10.3390/app112411663 · Cited by 55
“In particular, signal processing methods have been extensively examined to uncover the links between vibration data [6–13] or acoustic emissions [14–16] and REB health state.”
MethodShiri, H., Wodecki, J., Ziętek, B., & Zimroz, R. (2021) · Energies · doi:10.3390/en14227646 · Cited by 53
Self-citationA Diagnostics of Conveyor Belt Splices
Kozłowski, T., Wodecki, J., Zimroz, R., Błażej, R., & Hardygóra, M. (2020) · Applied Sciences · doi:10.3390/app10186259 · Cited by 52
Self-citationHebda-Sobkowicz, J., Zimroz, R., Wyłomańska, A., & Antoni, J. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108764 · Cited by 43
Self-citationSkowronek, K., Barszcz, T., Antoni, J., Zimroz, R., & Wyłomańska, A. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110465 · Cited by 43
“However, the mixture of the SOI and impulsive (non-Gaussian infinite-variance) noise excludes impulsive criteria that involve moments equal or greater than 2 (such as kurtosis, smoothness index, etc.) [6, 21, 60– 62]) as SOI detectors.”
Self-citationBerrouche, Y., Vashishtha, G., Chauhan, S., & Zimroz, R. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2024.112265 · Cited by 38
Self-citationSchmidt, S. P., Zimroz, R., & Heyns, P. S. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107668 · Cited by 37
Self-citationInvestigation on enhanced mathematical morphological operators for bearing fault feature extraction
Chen, B., Cheng, Y., Zhang, W., & Mei, G. (2021) · ISA Transactions · doi:10.1016/j.isatra.2021.07.027 · Cited by 32
Xu, Z., Tang, X., & Wang, Z. (2023) · Machines · doi:10.3390/machines11020277 · Cited by 32
Nowicki, J., Hebda-Sobkowicz, J., Zimroz, R., & Wyłomańska, A. (2021) · Applied Acoustics · doi:10.1016/j.apacoust.2021.107974 · Cited by 31
Self-citationSzurgacz, D., Zhironkin, S., Cehlár, M., Vöth, S., Spearing, A. J. S., & Ma, L. (2021) · Energies · doi:10.3390/en14030697 · Cited by 25
“Recently, there has been extensive activity in the development of research on the application of new technologies in mining thanks to Industry 4.0 [29–32].”
BackgroundInfluentialPitera, M., Chechkin, A. V., & Wyłomańska, A. (2021) · Statistical Methods & Applications · doi:10.1007/s10260-021-00571-9 · Cited by 24
Self-citationDynamic Analysis for the Hydraulic Leg Power of a Powered Roof Support
Szurgacz, D. (2021) · Energies · doi:10.3390/en14185715 · Cited by 22
Towards automated, integrated and unsupervised diagnosis of rolling element bearings
Jin, Y., Xin, G., & Antoni, J. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110691 · Cited by 22
Non-negative tensor factorization for vibration-based local damage detection
Gabor, M., Zdunek, R., Zimroz, R., Wodecki, J., & Wyłomańska, A. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110430 · Cited by 22
Self-citationChen, B., Gu, F., Zhang, W., Song, D., Cheng, Y., & Zhou, Z. (2023) · Structural Health Monitoring · doi:10.1177/14759217221149745 · Cited by 19
Industry Scale Optimization: Hammer Crusher and DEM Simulations
Doroszuk, B., & Król, R. (2022) · Minerals · doi:10.3390/min12020244 · Cited by 19
Diagnostics of Bolted Joints in Vibrating Screens Based on a Multi-Body Dynamical Model
Krot, P. V., Shiri, H., Dąbek, P., & Zimroz, R. (2023) · Materials · doi:10.3390/ma16175794 · Cited by 18
“The selection of the informative frequency band in a bearing fault diagnosis in the presence of non-Gaussian noise with a comparison of recently developed methods is fulfilled in [10].”
MethodSelf-citationGąsior, K., Urbańska, H., Grzesiek, A., Zimroz, R., & Wyłomańska, A. (2020) · Sensors · doi:10.3390/s20195648 · Cited by 15
Self-citationWodecki, J., Krot, P. V., Wroblewski, A. C., Chudy, K., & Zimroz, R. (2023) · Materials · doi:10.3390/ma16041533 · Cited by 14
“A novel approach for this problem’s solution, based on the conditional variance statistic with application to bearing fault diagnosis, is proposed in [38,39].”
BackgroundSelf-citationSchmidt, S. P., & Gryllias, K. (2020) · Measurement · doi:10.1016/j.measurement.2020.108517 · Cited by 14
Nowicki, J., Hebda-Sobkowicz, J., Zimroz, R., & Wyłomańska, A. (2020) · Sensors · doi:10.3390/s20226444 · Cited by 14
Self-citationSchmidt, S., & Gryllias, K. (2023) · Measurement · doi:10.1016/j.measurement.2023.113515 · Cited by 12
Kuzio, D., Zimroz, R., & Wyłomańska, A. (2023) · Measurement · doi:10.1016/j.measurement.2023.113148 · Cited by 11
“Specifically, damage detection at an early stage [1–3], with possible variation in operational condition [4– 11], and in the presence of non-Gaussian noise [12–15] is challenging.”
BackgroundSelf-citationPączek, K., Jelito, D., Pitera, M., & Wyłomańska, A. (2023) · Test · doi:10.1007/s11749-023-00894-7 · Cited by 11
“(Dominicy and Veredas 2013; Huixia et al. 2012; Maymon et al. 2000).”
Self-citationBenchmark solutions for stochastic dynamic responses of rectangular Mindlin plates
Huo, H., Liu, Z., Xu, A., Chen, G., & Yang, D. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107851 · Cited by 11
A Low-Cost, Small-Size, and Bluetooth-Connected Module to Detect Faults in Rolling Bearings
Raviola, E., & Fiori, F. L. (2020) · Applied Sciences · doi:10.3390/app10165645 · Cited by 11
Real-time detection of bearing faults through a hybrid WTMP analysis of frequency-related states
Bouaissi, I., Rezig, A., Laib, A., Djerdir, A., Guellout, O., Touati, S., & N’Diaye, A. (2024) · International Journal of Dynamics and Control · doi:10.1007/s40435-024-01468-7 · Cited by 9
Analysis of the vibro-acoustic data from test rig -comparison of acoustic and vibrational methods
Zimroz, P., Shiri, H., & Wodecki, J. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/942/1/012017 · Cited by 8
Wißbrock, P., Pelkmann, D., & Richter, Y. (2023) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin51400.2023.10217989 · Cited by 8
“A broad comparison for the selection of the informative-frequency band is presented in [10] to find a bandpass range that serves a specific type of fault best.”
BackgroundRolling Element Bearing Fault Identification using Vibration Data
Prawin, J. (2023) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455424400091 · Cited by 7
Robust correlation measures for informative frequency band selection in heavy-tailed signals
Hebda-Sobkowicz, J., Zimroz, R., Kumar, A., & Wyłomańska, A. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2025.103174 · Cited by 7
Self-citationA note on conditional variance and characterization of probability distributions
Jaworski, P., & Pitera, M. (2020) · Statistics & Probability Letters · doi:10.1016/j.spl.2020.108800 · Cited by 7
Hebda-Sobkowicz, J., Nowicki, J., Zimroz, R., & Wyłomańska, A. (2021) · Electronics · doi:10.3390/electronics10151863 · Cited by 7
Self-citationKuzio, D., Zimroz, R., & Wyłomańska, A. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.113166 · Cited by 5
Self-citationStatistical tools for anomaly detection as a part of predictive maintenance in the mining industry
Wyłomańska, A. (2022) · European Mathematical Society Magazine · doi:10.4171/mag/66 · Cited by 5
Self-citationYang, C., Li, H., Cao, S., & Zhang, K. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acf0dd · Cited by 5
Xu, Y., Wei, Y., Wang, Y., & Zhang, N. (2024) · Journal of Vibration and Control · doi:10.1177/10775463241288053 · Cited by 4
Karyatanti, I. D. P., Purnomo, F. R., Noersena, A., Zulkifli, R. S., Harahab, N., Wibowo, R., Budiarto, A., & Wijayanto, A. (2023) · Serbian Journal of Electrical Engineering · doi:10.2298/sjee2301033k · Cited by 4
An improved B-spline-based energy operator method for fault detection of motor bearings
Yao, D., Wei, Y., Xu, Y., & Sun, M. (2024) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062241307888 · Cited by 3
“To better measure the impulsivity and cyclostationary of a fault signal in motor fault diagnosis, a full-fledge index using Envelope Spectrum Kurtosis (ESK) 29 and negentropy 30 is proposed because ESK and negentropy can both measure the cyclostationary.”
Michalak, A., Hebda-Sobkowicz, J., Kumar, A., Zimroz, R., Zdunek, R., & Wyłomańska, A. (2025) · Measurement · doi:10.1016/j.measurement.2025.116840 · Cited by 3
“To compare the e ffi ciency of the filtering procedure, ENVSI is used [21].”
InfluentialSelf-citationWodecki, J., Michalak, A., Hebda-Sobkowicz, J., Wyłomańska, A., Szabat, K., Wolkiewicz, M., Pawlak, M., & Zimroz, R. (2025) · Mechanical sciences · doi:10.5194/ms-16-597-2025 · Cited by 3
Self-citationLuo, R., Xie, H., Wen, H., He, H., Li, Y., & Wang, K. (2026) · Algorithms · doi:10.3390/a19030228 · Cited by 3
Optimization of impulsive noise filtering method for rolling bearing signal enhancement
Xu, Y., Wei, Y., & Qu, J. (2023) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-023-04394-5 · Cited by 3
Fault Feature Extraction Using L-Kurtosis and Minimum Entropy-Based Signal Demodulation
Kumar, S., Chauhan, S., Vashishtha, G., Kumar, S., & Kumar, R. (2024) · Applied Sciences · doi:10.3390/app14188342 · Cited by 3
ORgram: semi-supervised learning framework for inline bearing diagnosis in varying speed
Hung, C.-Y., Lee, C., Tsai, C.-H., & Wu, J.-M. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14235-x · Cited by 3
“…of classification ✓ ✓ ✓ ✓ Liang et al. [11] Averaged local kurtosis Averaging the kurtosis of the segmented signal ✓ Hebda-Sobkowicz et al. [7, 10] Conditional variance Derivation of 20/60/20 Rule ✓ Roy et al. [18] Bi-directional LSTM Bi-directional LSTM ✓ S Yu et al. [19] TDMSAE A…”
Zimroz, P., Wroblewski, A. C., & Trybała, P. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/942/1/012018 · Cited by 3
Wodecki, J., Shiri, H., Siami, M., & Zimroz, R. (2022) · ePrints Soton (University of Southampton) · doi:10.5281/zenodo.7864611 · Cited by 3
Self-citationBearing fault detection using a method involving absolute value spectrum and impulsivity evaluation
Bouaouiche, K., Menasria, Y., & Khalfa, D. (2024) · Diagnostyka · doi:10.29354/diag/188371 · Cited by 3
Goodness-of-fit tests for the one-sided Lévy distribution based on quantile conditional moments
Pączek, K., Jelito, D., Pitera, M., & Wyłomańska, A. (2024) · Journal of Applied Statistics · doi:10.1080/02664763.2024.2340592 · Cited by 3
“The conditional moment-based methodologies have been also recently applied to various practical problems including local damage detection based on the signals with heavy-tailed background noise or to study the asymptotic behaviour of empirical processes, see [5, 7, 8].”
Self-citationBearing Fault Diagnosis usingEnhanced Envelope Analysis
Prawin, J. (2022) · e-Journal of Nondestructive Testing · doi:10.58286/27472 · Cited by 2
Integrated auto-diagnosis based on stochastic model for rolling element bearings
Jin, Y. (2022) · theses.fr (ABES) · doi:10.70675/0246041fzc5e3z4d31zab79zb5e755e8fd79 · Cited by 2
Huang, B., Zhang, Y., & Zhu, D. (2021) · Journal of Vibroengineering · doi:10.21595/jve.2020.21698 · Cited by 1
Qiu, T., You, Q., Jin, H., Xu, Z., & Wang, X. (2026) · Measurement · doi:10.1016/j.measurement.2026.121859 · Cited by 1
Sierra-Alonso, E. F., Antoni, J., & Castellanos-Dominguez, G. (2019) · HAL · Cited by 1
Sierra-Alonso, E. F. (2020) · theses.fr (ABES) · doi:10.70675/87004caez3f27z4e87zbf28z17ae513d2a57
Hebda-Sobkowicz, J., Wodecki, J., Michalak, A., Wyłomańska, A., Zimroz, R., Wolkiewicz, M., Pawlak, M., & Szabat, K. (2026) · Applied Acoustics · doi:10.1016/j.apacoust.2026.111354
Self-citationHebda-Sobkowicz, J., Michalak, A., Wodecki, J., Zimroz, R., Szabat, K., Wolkiewicz, M., & Wyłomańska, A. (2026) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-026-01541-2
“The CV has unique properties, and one of its variants, partitioning into seven subsets, is applied to select the informative frequency band (IFB) in signals with non-Gaussian noise [16, 23].”
Self-citationSoprani, D., Santos, K., Macedo, L. G. C., Junior, A. G. L., & Frizera, A. (2025) · Anais do ... Simpósio Brasileiro de Sistemas Elétricos · doi:10.29327/1842969.1-397
Metadata
- Authors
- Hebda-Sobkowicz, J., Zimroz, R., & Wyłomańska, A.
- Affiliations
- Wrocław University of Science and Technology (PL)
- Corresponding author
- Hebda-Sobkowicz, Justyna
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2020-04-12
- Volume
- 10
- Issue
- 8
- Pages
- 2657
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3016339222
- Cited by
- 65
- References
- 65
- Citations by year
- 2026: 4 · 2025: 4 · 2024: 8 · 2023: 15 · 2022: 8 · 2021: 18 · 2020: 7
- FWCI
- 5.94
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- EIT RawMaterials (18253)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- bearing fault diagnosis, non-Gaussian noise, signal-to-noise ratio estimation, spectral kurtosis, kurtogram, stability index, vibration signals, structural resonance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.