The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
A Novel Structural Damage Identification Method Using a Hybrid Deep Learning Framework
Open accessAbstract
In the past few years, structural health monitoring (SHM) has become an important technology to ensure the safety of structures. Structural damage identification methods based on machine learning techniques have gained wide attention due to the advantages of effectively extracting features from monitoring data. However, the existing machine learning-based methods heavily depend on manually selected feature parameters from raw signals. This will cause the selected feature to obtain the optimal solution for a specific condition but may fail to provide a similar performance in other cases. In addition, the feature selection takes a long time, which can fail to achieve real-time performance in a practical structure. To address these problems, this article proposes a hybrid deep learning framework for structural damage identification that includes three components, namely, ensemble empirical mode decomposition (EEMD), Pearson correlation coefficient (PCC), and a convolutional neural network (CNN). The proposed EEMD-PCC-CNN method is capable of automatically extracting features from raw signals to satisfy any damage identification objective. To evaluate the performance of the proposed EEMD-PCC-CNN method, a three-story building structure is investigated. The acceleration signal of the three-story building structure is first analyzed by EEMD. After obtaining the time-frequency information, PCC is utilized to select optimal time-frequency information as the input of the CNN for damage identification. Compared with other classical methods (SVM, KNN, RF, etc.), the experimental results show that the newly proposed EEMD-PCC-CNN method has significant performance advantages in damage identification. In addition, the accuracy of the proposed damage identification method is improved by more than 4% after utilizing EEMD in comparison with CNN alone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Currently, the most commonly used SHM methods are vibration-based SHM [14,15,16,17,18], AE-based SHM [9,19,20], Guided Wave (GW) based SHM [21,22,23,24,25], and Electro-Mechanical Impedance (EMI) based SHM [26,27].”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [17]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564
Abdeljaber, O., Avci, O., Kiranyaz, S., Gabbouj, M., & Inman, D. J. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.10.043 · Cited by 1,278
A review on the application of deep learning in system health management
Khan, S., & Yairi, T. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.024 · Cited by 1,133
Structural health monitoring for a wind turbine system: a review of damage detection methods
Ciang, C. C., Lee, J.-R., & Bang, H.-J. (2008) · Measurement Science and Technology · doi:10.1088/0957-0233/19/12/122001 · Cited by 802
Feng, D., & Feng, M. Q. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2017.11.018 · Cited by 782
Prediction of solar energy guided by pearson correlation using machine learning
Jebli, I., Belouadha, F.-Z., Kabbaj, M. I., & Tilioua, A. (2021) · Energy · doi:10.1016/j.energy.2021.120109 · Cited by 556
Fault Detection in Wireless Sensor Networks Through SVM Classifier
Zidi, S., Moulahi, T., & Alaya, B. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2017.2771226 · Cited by 327
The state of the art in structural health monitoring of cable-stayed bridges
Li, H., & Ou, J. (2016) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-015-0115-x · Cited by 267
Structural health monitoring algorithm comparisons using standard data sets
Figueiredo, E., Park, G., Figueiras, J., Farrar, C., & Worden, K. (2009) · doi:10.2172/961604 · Cited by 262
Gui, G., Pan, H., Lin, Z., Li, Y., & Yuan, Z. (2017) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-017-1518-5 · Cited by 262
Cited by
Jia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
Rizvi, S. H. M., & Abbas, M. (2023) · Engineering Research Express · doi:10.1088/2631-8695/acefae · Cited by 53
Duran, B., Emory, D., Azam, S. E., & Linzell, D. G. (2024) · Measurement · doi:10.1016/j.measurement.2024.115393 · Cited by 50
Ghiasi, R., & Malekjafarian, A. (2023) · Journal of Structural Integrity and Maintenance · doi:10.1080/24705314.2023.2230398 · Cited by 26
“Finally, in order to compare the performance of the proposed framework on damage detection of the Los Almos dataset, the CA of similar ML algorithms from other paper (He et al., 2022) has been chosen and is shown in Table 16.”
MethodТрач, Р., Ryzhakova, G., Trach, Y., Шпаков, А., & Tyvoniuk, V. (2023) · Sustainability · doi:10.3390/su15065250 · Cited by 33
Metadata
- Authors
- He, Y., Huang, Z., Liu, D., Zhang, L., & Liu, Y.
- Affiliations
- Chongqing College of Humanities, Science and Technology (CN)
- School of Computer Engineering, Chongqing College of Humanities, Science & Technology, Chongqing 401524, China
- Chongqing University (CN)
- Corresponding author
- Zhang, Likai
- Venue
- Buildings
- Publisher
- MDPI AG
- Published
- 2022-12-04
- Volume
- 12
- Issue
- 12
- Pages
- 2130
- ISSN
- 2075-5309 (ISSN-L)
- OpenAlex
- W4311521042
- Cited by
- 16
- References
- 38
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 3 · 2023: 5
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Buildings (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Science and Technology Research Program of Chongqing Municipal Education Commission (KJQN202201805, KJZD202001801, CRKZK2022006, JSJGC202201, 2017-GX-155, 21CRKXJJG25)
- Science and Technology Research Program of Chongqing College of Humanities, Science & Technology (KJQN202201805, KJZD202001801, CRKZK2022006, JSJGC202201, 2017-GX-155, 21CRKXJJG25)
- Chongqing Education Science Planning Project (KJQN202201805, KJZD202001801, CRKZK2022006, JSJGC202201, 2017-GX-155, 21CRKXJJG25)
- Teaching Reform Project of Chongqing College of Humanities, Science & Technology (KJQN202201805, KJZD202001801, CRKZK2022006, JSJGC202201, 2017-GX-155, 21CRKXJJG25)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- structural damage detection, structural health monitoring, ensemble empirical mode decomposition, Pearson correlation, convolutional neural networks, hybrid deep learning model, automatic feature extraction, time-frequency analysis, acceleration signals
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Novel Structural Damage Identification Method Using a Hybrid Deep Learning Framework. https://app.cochat.ai/papers/10.3390/buildings12122130
- The paper
- He, Y., Huang, Z., Liu, D., Zhang, L., & Liu, Y. (2022). A Novel Structural Damage Identification Method Using a Hybrid Deep Learning Framework. Buildings. https://doi.org/10.3390/buildings12122130
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.