The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Preparation and Photocatalytic Activities of TiO2-Based Composite Catalysts
Open accessAbstract
While modern industry has contributed to the prosperity of an increasingly urbanized society, it has also led to serious pollution problems, with discharged wastewater and exhaust gases causing significant environmental harm. Titanium dioxide (TiO2), which is an excellent photocatalyst, has received extensive attention because it is inexpensive and able to photocatalytically degrade pollutants in an environmentally friendly manner. TiO2 has many advantages, including high chemical stability, low toxicity, low operating costs, and environmental friendliness. TiO2 is an N-order semiconductor material with a bandgap of 3.2 eV. Only when the wavelength of ultraviolet light is less than or equal to 387.5 nm, the valence band electrons can obtain the energy of the photon and pass through the conduction band to form photoelectrons, meanwhile the valence band forms a photogenerated hole. And light in other wavelength regions does not excite this photogenerated electrons. The most common methods used to improve the photocatalytic efficiency of TiO2 involve increasing its photoresponse range and reducing photogenerated-carrier coupling. The morphology, size, and structure of a heterojunction can be altered through element doping, leading to improved photocatalytic efficiency. Mainstream methods for preparing TiO2 are reviewed in this paper, with several excellent preparation schemes for improving the photocatalytic efficiency of TiO2 introduced. TiO2 is mainly prepared using sol-gel, solvothermal, hydrothermal, anodic oxidation, microwave-assisted, CVD and PVD methods, and TiO2 nanoparticles with excellent photocatalytic properties can also be prepared. Ti-containing materials are widely used to purify harmful gases, as well as contaminants from building materials, coatings, and daily necessities. Therefore, the preparation and applications of titanium materials have become globally popular research topics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
TiO2 photocatalysis: Design and applications
Nakata, K., & Fujishima, A. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.06.001 · Cited by 3,651
Ajmal, A., Majeed, I., Malik, R. N., Idriss, H., & Nadeem, M. A. (2014) · RSC Adv. · doi:10.1039/c4ra06658h · Cited by 1,485
Zhou, W., Yin, Z., Du, Y., Huang, X., Zeng, Z., Fan, Z., Liu, H., Wang, J., & Zhang, H. (2013) · Small · doi:10.1002/smll.201201161 · Cited by 1,258
Selective Breaking of Hydrogen Bonds of Layered Carbon Nitride for Visible Light Photocatalysis
Kang, Y., Yang, Y., Yin, L., Kang, X., Wang, L., Liu, G., & Cheng, H. (2016) · Advanced Materials · doi:10.1002/adma.201601567 · Cited by 626
Iron doped TiO2 films and their photoactivity in nitrobenzene removal from water
Crişan, M., Mardare, D., Ianculescu, A., Drăgan, N., Niţoi, I., Crişan, D., Voicescu, M., Todan, L., Oancea, P., Adomniţei, C., et al. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.05.124 · Cited by 69
Cited by
Titanium Dioxide as the Most Used Photocatalyst for Water Purification: An Overview
Armaković, S. J., Savanović, M. M., & Armaković, S. (2022) · Catalysts · doi:10.3390/catal13010026 · Cited by 324
Metadata
- Authors
- Yang, H., Yang, B., Chen, W., & Yang, J.
- Venue
- Catalysts
- Publisher
- MDPI AG
- Published
- 2022-10-17
- Volume
- 12
- Issue
- 10
- Pages
- 1263
- ISSN
- 2073-4344 (ISSN-L)
- OpenAlex
- W4306651518
- Cited by
- 167
- References
- 5
- FWCI
- 5.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and Photocatalytic Activities of TiO2-Based Composite Catalysts. https://app.cochat.ai/papers/10.3390/catal12101263
- The paper
- Yang, H., Yang, B., Chen, W., & Yang, J. (2022). Preparation and Photocatalytic Activities of TiO2-Based Composite Catalysts. Catalysts. https://doi.org/10.3390/catal12101263
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.