Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.

Thickness-Dependent Terahertz Permittivity of Epitaxially Grown PbTe Thin Films

Open access

Abstract

The exceptional thermoelectric properties of PbTe are believed to be associated with the incipient ferroelectricity of this material, which is caused by strong electron–phonon coupling that connects phononic and electronic dynamics. Here, we have used terahertz time-domain spectroscopy measurements to generate complex permittivity spectra for a set of epitaxially grown PbTe thin films with thicknesses between 100 nm and 500 nm at temperatures from 10 K to 300 K. Using a Drude–Lorentz model, we retrieved the physical parameters of both the phononic and electronic contributions to the THz permittivity. We observed a strong decrease, or softening, of the transverse optical phonon mode frequency with decreasing temperature, determining a thickness-independent negative ferroelectric-transition critical temperature, while we found a thickness-dependent anharmonic phonon decay lifetime. The electronic contribution to the permittivity was larger in thinner films, and both the carrier density and mobility increased with decreasing temperature in all films. Finally, we detected a thickness-dependent longitudinal optical phonon mode frequency, indicating the presence of plasmon–phonon coupling.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/coatings13111855

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Figures

1 Figure 1. ( a ) Schematic diagram of the THz-TDS setup in transmission geometry. ( b ) Time-domain waveforms of the THz electric field pulses transmitted through samples with different PbTe film thicknesses d , at room temperature, in comparison with a substrate-only reference measurement (ref). ( c ) Temperature-induced changes in the THz pulses transmitted through the 300 nm-thick sample, for a few temperatures. The curves are vertically offset for clarity.
1 Figure 1. ( a ) Schematic diagram of the THz-TDS setup in transmission geometry. ( b ) Time-domain waveforms of the THz electric field pulses transmitted through samples with different PbTe film thicknesses d , at room temperature, in comparison with a substrate-only reference measurement (ref). ( c ) Temperature-induced changes in the THz pulses transmitted through the 300 nm-thick sample, for a few temperatures. The curves are vertically offset for clarity.CC-BY · From the PDF
1 Figure 2. ( a -c ) Real and ( d -f ) imaginary parts of the frequency-dependent permittivity curves of the PbTe films, extracted from THz-TDS measurements for several temperatures (step of 20 K) between 10 K (blue curves) to 300 K (red curves). Each column in the grid of figure panels corresponds to the results for a particular film thickness considered in this study.
1 Figure 2. ( a -c ) Real and ( d -f ) imaginary parts of the frequency-dependent permittivity curves of the PbTe films, extracted from THz-TDS measurements for several temperatures (step of 20 K) between 10 K (blue curves) to 300 K (red curves). Each column in the grid of figure panels corresponds to the results for a particular film thickness considered in this study.CC-BY · From the PDF
1 Figure 3. ( a ) Real and ( b ) imaginary parts of the permittivity data for the 300 nm PbTe thin film at 10 K (blue circles) and 300 K (red squares) with the optimal fits using Equation (3) (black dashed lines).
1 Figure 3. ( a ) Real and ( b ) imaginary parts of the permittivity data for the 300 nm PbTe thin film at 10 K (blue circles) and 300 K (red squares) with the optimal fits using Equation (3) (black dashed lines).CC-BY · From the PDF
80 (c) Figure 4. Cont .
80 (c) Figure 4. Cont .CC-BY · From the PDF
1 Figure 4. For all investigated film thicknesses, the optimized parameters found through the fit of the model to the permittivity data are presented as a function of the temperature. ( a ) TO phonon central frequency; ( b ) TO phonon linewidth; ( c ) plasma frequency (inset: carrier density variation); ( d ) carrier collision rate (inset: carrier mobility variation); ( e ) high-frequency dielectric constant; and ( f ) static dielectric constant. Additionally, ( g ) shows the LO phonon frequency as computed from the n TO, e ¥ , and e s data.
1 Figure 4. For all investigated film thicknesses, the optimized parameters found through the fit of the model to the permittivity data are presented as a function of the temperature. ( a ) TO phonon central frequency; ( b ) TO phonon linewidth; ( c ) plasma frequency (inset: carrier density variation); ( d ) carrier collision rate (inset: carrier mobility variation); ( e ) high-frequency dielectric constant; and ( f ) static dielectric constant. Additionally, ( g ) shows the LO phonon frequency as computed from the n TO, e ¥ , and e s data.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 40 references

Research works printed but not linked: 3

  1. Fox, M. (2010). Optical Properties of Solids, Oxford University Press. [2nd ed.].
  2. Kittel, C. (2005). Introduction to Solid State Physics, Wiley. [8th ed.].
  3. Okazaki, A.K. (2019). Investigation of the Magnetotransport Properties in the Crystalline Topological Insulator Lead Tin Telluride. [Ph.D. Thesis, INPE].

Cited by

See all 11

Metadata

Authors
Kawahala, N. M., Matos, D. A., Rappl, P. H. O., Abramof, E., Baydin, A., Kono, J., & Hernandez, F. G. G.
Affiliations
  • Universidade de São Paulo (BR)
  • Instituto Nacional de Pesquisas Espaciais (BR)
  • Rice University (US)
  • Instituto de Física, Universidade de São Paulo, São Paulo 05508-090, Brazil
Venue
Coatings
Publisher
MDPI AG
Published
2023-10-28
Volume
13
Issue
11
Pages
1855
ISSN
2079-6412 (ISSN-L)
OpenAlex
W4388099562
Cited by
10
References
40
Citations by year
2026: 4 · 2025: 5 · 2024: 1
FWCI
0.74
Type
journal article
Language
en
Open access
Locations
  • Coatings (publishedVersion, cc-by)
  • Rice Research Repository (Rice University) (submittedVersion, cc-by)
  • Biblioteca Digital da Memória Científica do INPE (National Institute for Space Research) (submittedVersion)
Funders
  • São Paulo Research Foundation (FAPESP) (2018/06142-5, 2023/04245-0, 2023/11158-6, 141746/2019-0, 409245/2022-4, 307192/2021-0, C-1509)
  • Brazilian National Council for Scientific and Technological Development (CNPq) (2018/06142-5, 2023/04245-0, 2023/11158-6, 141746/2019-0, 409245/2022-4, 307192/2021-0, C-1509)
  • Robert A. Welch Foundation (2018/06142-5, 2023/04245-0, 2023/11158-6, 141746/2019-0, 409245/2022-4, 307192/2021-0, C-1509)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Terahertz technology and applications
  • Physical Sciences › Materials Science › Materials Chemistry › Ferroelectric and Piezoelectric Materials
  • Physical Sciences › Materials Science › Materials Chemistry › Advanced Thermoelectric Materials and Devices
Keywords
PbTe thin films, thickness dependence, incipient ferroelectricity, electron-phonon coupling, longitudinal optical phonons, plasmon-phonon coupling, anharmonic phonon decay, carrier concentration, carrier mobility, Drude-Lorentz model, thermoelectric properties

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Thickness-Dependent Terahertz Permittivity of Epitaxially Grown PbTe Thin Films. https://app.cochat.ai/papers/10.3390/coatings13111855
The paper
Kawahala, N. M., Matos, D. A., Rappl, P. H. O., Abramof, E., Baydin, A., Kono, J., & Hernandez, F. G. G. (2023). Thickness-Dependent Terahertz Permittivity of Epitaxially Grown PbTe Thin Films. Coatings. https://doi.org/10.3390/coatings13111855

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.