The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Searching for Next Single-Phase High-Entropy Alloy Compositions
Open accessAbstract
There has been considerable technological interest in high-entropy alloys (HEAs) since the initial publications on the topic appeared in 2004. However, only several of the alloys investigated are truly single-phase solid solution compositions. These include the FCC alloys CoCrFeNi and CoCrFeMnNi based on 3d transition metals elements and BCC alloys NbMoTaW, NbMoTaVW, and HfNbTaTiZr based on refractory metals. The search for new single-phase HEAs compositions has been hindered by a lack of an effective scientific strategy for alloy design. This report shows that the chemical interactions and atomic diffusivities predicted from ab initio molecular dynamics simulations which are closely related to primary crystallization during solidification can be used to assist in identifying single phase high-entropy solid solution compositions. Further, combining these simulations with phase diagram calculations via the CALPHAD method and inspection of existing phase diagrams is an effective strategy to accelerate the discovery of new single-phase HEAs. This methodology was used to predict new single-phase HEA compositions. These are FCC alloys comprised of CoFeMnNi, CuNiPdPt and CuNiPdPtRh, and HCP alloys of CoOsReRu.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
A unified formulation of the constant temperature molecular dynamics methods
Nosé, S. (1984) · The Journal of Chemical Physics · doi:10.1063/1.447334 · Cited by 19,152
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
The Thermo-Calc databank system
Sundman, B., Jansson, B., & Andersson, J.-O. (1985) · Calphad · doi:10.1016/0364-5916(85)90021-5 · Cited by 3,343
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationHigh-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
High-entropy high-hardness metal carbides discovered by entropy descriptors
Sarker, P., Harrington, T., Toher, C., Oses, C., Samiee, M., Maria, J.-P., Brenner, D. W., Vecchio, K. S., & Curtarolo, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07160-7 · Cited by 1,082
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Self-citationLattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Self-citationLi, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 532
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 528
Self-citationAlloy design for intrinsically ductile refractory high-entropy alloys
Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 509
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Self-citationRao, J. C., Diao, H. Y., Ocelík, V., Vainchtein, D., Zhang, C., Kuo, C., Tang, Z., Guo, W., Poplawsky, J. D., Zhou, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.066 · Cited by 439
Ma, Y., Wang, Q., Jiang, B. B., Li, C. L., Hao, J. M., Li, X. N., Dong, C., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.050 · Cited by 410
Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating
Ye, Q., Feng, K., Li, Z., Lu, F., Li, R., Huang, J., & Wu, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.11.176 · Cited by 408
Phase selection rules for cast high entropy alloys: An overview
Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Takeuchi, A., Amiya, K., Wada, T., Yubuta, K., & Zhang, W. (2014) · JOM · doi:10.1007/s11837-014-1085-x · Cited by 367
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H. F., & Zhang, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.07.102 · Cited by 361
Self-citationLi, D., & Zhang, Y. (2016) · Intermetallics · doi:10.1016/j.intermet.2015.11.002 · Cited by 346
Ikeda, Y., Grabowski, B., & Körmann, F. (2019) · Materials Characterization · doi:10.1016/j.matchar.2018.06.019 · Cited by 337
Zuo, T., Gao, M. C., Ouyang, L., Yang, X., Cheng, Y., Feng, R., Chen, S., Liaw, P. K., Hawk, J. A., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.013 · Cited by 332
Self-citationThe structure and properties of high-entropy alloys and nitride coatings based on them
Pogrebnjak, A. D., Bagdasaryan, A. A., Yakushchenko, I. V., & Beresnev, V. M. (2014) · Russian Chemical Reviews · doi:10.1070/rc2014v083n11abeh004407 · Cited by 320
High-throughput design of high-performance lightweight high-entropy alloys
Feng, R., Zhang, C., Gao, M. C., Pei, Z., Zhang, F., Chen, Y., Ma, D., An, K., Poplawsky, J. D., Ouyang, L., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-24523-9 · Cited by 319
Self-citationModel interatomic potentials and lattice strain in a high-entropy alloy
Farkas, D., & Caro, A. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.245 · Cited by 318
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
High-entropy functional materials
Gao, M. C., Miracle, D. B., Maurice, D., Yan, X., Zhang, Y., & Hawk, J. A. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.323 · Cited by 306
Self-citationSerration and noise behaviors in materials
Zhang, Y., Liu, J. P., Chen, S. Y., Xie, X., Liaw, P. K., Dahmen, K. A., Qiao, J. W., & Wang, Y. L. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.06.004 · Cited by 303
Model interatomic potentials for Fe–Ni–Cr–Co–Al high-entropy alloys
Farkas, D., & Caro, A. (2020) · Journal of Materials Research · doi:10.1557/jmr.2020.294 · Cited by 295
Design of Light-Weight High-Entropy Alloys
Feng, R., Gao, M., Lee, C., Mathes, M., Zuo, T., Chen, S., Hawk, J., Zhang, Y., & Liaw, P. (2016) · Entropy · doi:10.3390/e18090333 · Cited by 290
Self-citationUnderstanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloys
Zhang, C., Zhang, F., Diao, H., Gao, M. C., Tang, Z., Poplawsky, J. D., & Liaw, P. K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.073 · Cited by 285
Self-citationDiscovery of high-entropy ceramics via machine learning
Kaufmann, K., Maryanovsky, D., Mellor, W. M., Zhu, C., Rosengarten, A. S., Harrington, T. J., Oses, C., Toher, C., Curtarolo, S., & Vecchio, K. S. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0317-6 · Cited by 276
Kube, S. A., Sohn, S., Uhl, D., Datye, A., Mehta, A., & Schroers, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.023 · Cited by 270
Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys
Xiao, D. H., Zhou, P. F., Wu, W. Q., Diao, H. Y., Gao, M. C., Song, M., & Liaw, P. K. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.036 · Cited by 266
Self-citationYusenko, K. V., Riva, S., Carvalho, P. A., Yusenko, M. V., Arnaboldi, S., Sukhikh, A. S., Hanfland, M., & Gromilov, S. A. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.05.022 · Cited by 256
Sc–Zr–Nb–Rh–Pd and Sc–Zr–Nb–Ta–Rh–Pd High-Entropy Alloy Superconductors on a CsCl-Type Lattice
Stolze, K., Tao, J., von Rohr, F. O., Kong, T., & Cava, R. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04578 · Cited by 122
Lattice thermal conductivity of multi-component alloys
Caro, M., Béland, L. K., Samolyuk, G. D., Stoller, R. E., & Caro, A. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.06.035 · Cited by 106
Metadata
- Authors
- Gao, M., & Alman, D.
- Venue
- Entropy
- Publisher
- MDPI AG
- Published
- 2013-10-18
- Volume
- 15
- Issue
- 10
- Pages
- 4504-4519
- ISSN
- 1099-4300 (ISSN-L)
- OpenAlex
- W2163209911
- Cited by
- 349
- References
- 23
- FWCI
- 33.21
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.