The DOI matches its Crossref record.
Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys
Open accessAbstract
The effects of metallurgical factors on the aqueous corrosion behavior of high-entropy alloys (HEAs) are reviewed in this article. Alloying (e.g., Al and Cu) and processing (e.g., heat treatments) effects on the aqueous corrosion behavior of HEAs, including passive film formation, galvanic corrosion, and pitting corrosion, are discussed in detail. Corrosion rates of HEAs are calculated using electrochemical measurements and the weight-loss method. Available experimental corrosion data of HEAs in two common solutions [sulfuric acid (0.5 M H2SO4) and salt water (3.5 weight percent, wt.%, NaCl)], such as the corrosion potential (Ecorr), corrosion current density (icorr), pitting potential (Epit), and passive region (ΔE), are summarized and compared with conventional corrosion-resistant alloys. Possible directions of future work on the corrosion behavior of HEAs are suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Self-citationOxidation behavior of arc melted AlCoCrFeNi multi-component high-entropy alloys
Butler, T. M., & Weaver, M. L. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.02.257 · Cited by 470
Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys
Xiao, D. H., Zhou, P. F., Wu, W. Q., Diao, H. Y., Gao, M. C., Song, M., & Liaw, P. K. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.036 · Cited by 266
Self-citationLiu, B., Wu, J., Cui, Y., Zhu, Q., Xiao, G., Wu, S., Cao, G.-H., & Ren, Z. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.02.002 · Cited by 55
Superconductivity and paramagnetism in Cr-containing tetragonal high-entropy alloys
Liu, B., Wu, J., Cui, Y., Zhu, Q., Xiao, G., Wu, S., Cao, G.-H., & Ren, Z. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.159293 · Cited by 36
Metadata
- Authors
- Tang, Z., Huang, L., He, W., & Liaw, P.
- Venue
- Entropy
- Publisher
- MDPI AG
- Published
- 2014-02-14
- Volume
- 16
- Issue
- 2
- Pages
- 895-911
- ISSN
- 1099-4300 (ISSN-L)
- OpenAlex
- W1990077863
- Cited by
- 235
- References
- 0
- FWCI
- 14.41
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys. https://app.cochat.ai/papers/10.3390/e16020895
- The paper
- Tang, Z., Huang, L., He, W., & Liaw, P. (2014). Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys. Entropy. https://doi.org/10.3390/e16020895
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
