Cited by 57Wireless Power Transfer SystemsAdvanced DC-DC ConvertersInduction Heating and Inverter Technology

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Research and Application of Capacitive Power Transfer System: A Review

Open access

Abstract

Capacitive power transfer (CPT) uses an electric field as the transfer medium to achieve wireless power transfer (WPT). Benefitting from the low eddy current loss, simple system structure and strong plasticity of the coupling coupler, the CPT system has recently gained much attention. The CPT system has significantly improved transfer power, system efficiency, and transfer distance due to continuous research and discussion worldwide. This review briefly presents the basic working principle of the CPT system and summarizes the theoretical research in four aspects, including coupling coupler and high-frequency power converter. Following this, the review focuses on research in six key directions, including system modelling and efficiency optimization. The application of CPT technology in five fields, including medical devices and transportation, is also discussed. This review introduces the progress of CPT research in recent years, hoping to serve as a reference for researchers, to promote the further research and application of the CPT system.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/electronics11071158

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Figures

C 13 +C 14 +C 23 +C 24 KFigure 4 . Figure 4. Different forms of CPT system coupler: (a) Parallel disc-shaped, annular coupling mechanism. Reprinted with permission from ref. [25], 2020 IEEE. (b) Parallel cylindrical coupling mechanism. Reprinted with permission from ref. [28]. (c) Laminated rectangular coupling mechanism. Reprinted with permission from ref. [29], 2019 IEEE. (d) Array type rectangular coupling mechanism. Reprinted with permission from ref. [29], 2019 IEEE.
C 13 +C 14 +C 23 +C 24 KFigure 4 . Figure 4. Different forms of CPT system coupler: (a) Parallel disc-shaped, annular coupling mechanism. Reprinted with permission from ref. [25], 2020 IEEE. (b) Parallel cylindrical coupling mechanism. Reprinted with permission from ref. [28]. (c) Laminated rectangular coupling mechanism. Reprinted with permission from ref. [29], 2019 IEEE. (d) Array type rectangular coupling mechanism. Reprinted with permission from ref. [29], 2019 IEEE.CC-BY · From the PDF
Figure 4 . Figure 4. Different forms of CPT system coupler: (a) Parallel disc-shaped, annular coupling mechanism. Reprinted with permission from ref. [25], 2020 IEEE. (b) Parallel cylindrical coupling mechanism. Reprinted with permission from ref. [28]. (c) Laminated rectangular coupling mechanism. Reprinted with permission from ref. [29], 2019 IEEE. (d) Array type rectangular coupling mechanism. Reprinted with permission from ref. [30], 2019 IEEE.
Figure 4 . Figure 4. Different forms of CPT system coupler: (a) Parallel disc-shaped, annular coupling mechanism. Reprinted with permission from ref. [25], 2020 IEEE. (b) Parallel cylindrical coupling mechanism. Reprinted with permission from ref. [28]. (c) Laminated rectangular coupling mechanism. Reprinted with permission from ref. [29], 2019 IEEE. (d) Array type rectangular coupling mechanism. Reprinted with permission from ref. [30], 2019 IEEE.CC-BY · From the PDF
Figure 7 . Figure 7. System coupler with shielding plates and simulated electric field distribution. Reprinted with permission from ref. [22], 2018 IEEE: (a) coupler dimension; (b) simulated electric field distribution.
Figure 7 . Figure 7. System coupler with shielding plates and simulated electric field distribution. Reprinted with permission from ref. [22], 2018 IEEE: (a) coupler dimension; (b) simulated electric field distribution.CC-BY · From the PDF
Figure 7 . Figure 7. System coupler with shielding plates and simulated electric field distribution. Reprinted with permission from ref. [22], 2018 IEEE: (a) coupler dimension; (b) simulated electric field distribution.
Figure 7 . Figure 7. System coupler with shielding plates and simulated electric field distribution. Reprinted with permission from ref. [22], 2018 IEEE: (a) coupler dimension; (b) simulated electric field distribution.CC-BY · From the PDF
Figure 8 . Figure 8. Power supply for biomedical implants based on CPT system. Reprinted from ref. [107], 2016 IEEE: (a) coupling model, (b) experiment.
Figure 8 . Figure 8. Power supply for biomedical implants based on CPT system. Reprinted from ref. [107], 2016 IEEE: (a) coupling model, (b) experiment.CC-BY · From the PDF
Figure 8 . Figure 8. Power supply for biomedical implants based on CPT system. Reprinted with permission from ref. [107], 2016 IEEE: (a) coupling model, (b) experiment.
Figure 8 . Figure 8. Power supply for biomedical implants based on CPT system. Reprinted with permission from ref. [107], 2016 IEEE: (a) coupling model, (b) experiment.CC-BY · From the PDF
Figure 9 . Figure 9. Schematic diagram of EV charging based on the CPT system by using concrete pavement and tire steel belt. Reprinted with permission from ref. [111], 2013 IEEE.
Figure 9 . Figure 9. Schematic diagram of EV charging based on the CPT system by using concrete pavement and tire steel belt. Reprinted with permission from ref. [111], 2013 IEEE.CC-BY · From the PDF
Figure 10 . Figure 10. Energy harvesting based on CPT system using power line ins permission from ref. [118], 2014 IEEE.
Figure 10 . Figure 10. Energy harvesting based on CPT system using power line ins permission from ref. [118], 2014 IEEE.CC-BY · From the PDF
Figure 10 . Figure 10. Energy harvesting based on CPT system using power line insulators. Reprinted with permission from ref. [118], 2014 IEEE.
Figure 10 . Figure 10. Energy harvesting based on CPT system using power line insulators. Reprinted with permission from ref. [118], 2014 IEEE.CC-BY · From the PDF
Figure 11 . Figure 11. Schematic diagram of system coupling coupler and underwater test. Reprinted from ref [124].
Figure 11 . Figure 11. Schematic diagram of system coupling coupler and underwater test. Reprinted from ref [124].CC-BY · From the PDF
.Figure 11 . Figure 11. Schematic diagram of system coupling coupler and underwater test. Reprinted from ref [124].Figure 11. Schematic diagram of system coupling coupler and underwater test. Reprinted from ref. [124].
.Figure 11 . Figure 11. Schematic diagram of system coupling coupler and underwater test. Reprinted from ref [124].Figure 11. Schematic diagram of system coupling coupler and underwater test. Reprinted from ref. [124].CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Research works printed but not linked: 127

  1. Zhang, 2019, Wireless Power Transfer—An Overview, IEEE Trans. Ind. Electron., 66, 1044, 10.1109/TIE.2018.2835378 · DOI
  2. Patil, 2018, Wireless Power Transfer for Vehicular Applications: Overview and Challenges, IEEE Trans. Transp. Electrif., 4, 3, 10.1109/TTE.2017.2780627 · DOI
  3. Hui, 2014, A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer, IEEE Trans. Power Electron., 29, 4500, 10.1109/TPEL.2013.2249670 · DOI
  4. Kazmierkowski, 2012, Unplugged But Connected: Review of Contactless Energy Transfer Systems, IEEE Ind. Electron. Mag., 6, 47, 10.1109/MIE.2012.2220869 · DOI
  5. Minnaert, B., and Stevens, N. (2017). Optimal Analytical Solution for a Capacitive Wireless Power Transfer System with One Transmitter and Two Receivers. Energies, 10. · DOI
  6. Lu, F., Zhang, H., and Mi, C. (2017). A Review on the Recent Development of Capacitive Wireless Power Transfer Technology. Energies, 10. · DOI
  7. Dai, 2015, A Survey of Wireless Power Transfer and a Critical Comparison of Inductive and Capacitive Coupling for Small Gap Applications, IEEE Trans. Power Electron., 30, 6017, 10.1109/TPEL.2015.2415253 · DOI
  8. Leung, 2018, Modeling the Contact Interface of Ultrasonic Power Transfer System Based on Mechanical and Electrical Equivalence, IEEE J. Emerg. Sel. Top. Power Electron., 6, 800, 10.1109/JESTPE.2017.2720852 · DOI
  9. Zhang, K., Du, H., Luo, B., Mai, R., Song, B., and Hu, A.P. (2021). Optimal Load Determination of Capacitor–Inductor Compensated Capacitive Power Transfer System with Curved-Edge Shielding Layer. Electronics, 10. · DOI
  10. Jin, 2019, Wireless Laser Power Transmission: A Review of Recent Progress, IEEE Trans. Power Electron., 34, 3842, 10.1109/TPEL.2018.2853156 · DOI
  11. Krasnok, A. (2019). Coherently Driven and Super directive Antennas. Electronics, 8. · DOI
  12. Kracek, 2019, Analysis of Capacitive Wireless Power Transfer, IEEE Access, 7, 26678, 10.1109/ACCESS.2018.2883712 · DOI
  13. Wang, 2022, Review, Analysis, and Design of Four Basic CPT Topologies and the Application of High-Order Compensation Networks, IEEE Trans. Power Electron., 37, 6181, 10.1109/TPEL.2021.3131625 · DOI
  14. Luo, 2022, Compensation Network Design of CPT Systems for Achieving Maximum Power Transfer Under Coupling Voltage Constraints, IEEE J. Emerg. Sel. Top. Power Electron., 10, 138, 10.1109/JESTPE.2020.3027348 · DOI
  15. Zou, 2021, Modeling Single-Wire Capacitive Power Transfer System with Strong Coupling to Ground, IEEE J. Emerg. Sel. Top. Power Electron., 9, 2295, 10.1109/JESTPE.2019.2942034 · DOI
  16. Zhang, 2016, A 4-Plate Compact Capacitive Coupler Design and LCL-Compensated Topology for Capacitive Power Transfer in Electric Vehicle Charging Applications, IEEE Trans. Power Electron., 31, 8541
  17. Matos, 2015, Resonant Electrical Coupling: Circuit Model and First Experimental Results, IEEE Trans. Microw. Theory Tech., 63, 2983, 10.1109/TMTT.2015.2458323 · DOI
  18. Huang, 2015, Defining the mutual coupling of capacitive power transfer for wireless power transfer, Electron. Lett., 51, 1806, 10.1049/el.2015.2709 · DOI
  19. Huang, 2016, Z-Impedance Compensation for Wireless Power Transfer Based on Electric Field, IEEE Trans. Power Electron., 31, 7556, 10.1109/TPEL.2016.2557461 · DOI
  20. Liu, 2021, Interleaved Capacitive Coupler for Wireless Power Transfer, IEEE Trans. Power Electron., 36, 13526, 10.1109/TPEL.2021.3086629 · DOI
  21. Wu, 2021, Multiobjective Parameter Optimization of a Four-Plate Capacitive Power Transfer System, IEEE J. Emerg. Sel. Top. Power Electron., 9, 2328, 10.1109/JESTPE.2020.2979990 · DOI
  22. Zhang, 2018, Six-Plate Capacitive Coupler to Reduce Electric Field Emission in Large Air-Gap Capacitive Power Transfer, IEEE Trans. Power Electron., 33, 665, 10.1109/TPEL.2017.2662583 · DOI
  23. Behnamfar, M., Javadi, H., and Afjei, E. (2020, January 4–6). A dynamic CPT system L.C. Compensated with a six-plate capacitive coupler for wireless charging of electric vehicle in motion. Proceedings of the 2020 28th Iranian Conference on Electrical Engineering (ICEE), Tabriz, Iran. · DOI
  24. Wu, 2019, Study on load adaptation of capacitive power transfer system with a four-plate compact capacitive coupler, Electr. Eng., 101, 733, 10.1007/s00202-019-00820-x · DOI
  25. Park, 2020, Separated Circular Capacitive Coupler for Reducing Cross-Coupling Capacitance in Drone Wireless Power Transfer System, IEEE Trans. Microw. Theory Tech., 68, 3978, 10.1109/TMTT.2020.2989118 · DOI
  26. Chen, X., Yu, S., and Zhang, Z. (2019, January 14–17). A Strip-Coupler for Dynamic Capacitive Wireless Power Transfer. Proceedings of the IECON Proceedings (Industrial Electronics Conference), Lisbon, Portugal. · DOI
  27. Zhu, Q., Zou, L.J., Su, M., and Hu, A.P. (2019, January 18–21). E-Field Analysis of a 3D Capacitive Power Transfer Configuration with Single Source Excitation. Proceedings of the 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), London, UK. · DOI
  28. Wu, 2020, A Sleeve-Type Capacitive Power Transfer System with Different Coupling Arrangements for Rotary Application, IEEE Access, 8, 69148, 10.1109/ACCESS.2020.2986359 · DOI
  29. Pamungkas, L., Tampubolon, M., Chang, Y.-C., and Chiu, H.-J. (2019, January 25–28). Resonant Network Transformation and Implementation of a Compacted Four-Plate Capacitive Power Transfer. Proceedings of the 2019 IEEE 4th International Future Energy Electronics Conference (IFEEC), Singapore. · DOI
  30. Zhu, 2019, A Novel Capacitive Coupler Array with Free-Positioning Feature for Mobile Tablet Applications, IEEE Trans. Power Electron., 34, 6014, 10.1109/TPEL.2018.2888623 · DOI
  31. Abramov, 2019, A Network-Based Approach for Modeling Resonant Capacitive Wireless Power Transfer Systems, CPSS Trans. Power Electron. Appl., 4, 19, 10.24295/CPSSTPEA.2019.00003 · DOI
  32. Mishra, 2016, Power transfer using portable surfaces in capacitively coupled power transfer technology, IET Power Electron., 9, 997, 10.1049/iet-pel.2015.0332 · DOI
  33. Wang, 2020, Analysis and Design of Capacitive Power Transfer Systems Based on Induced Voltage Source Model, IEEE Trans. Power Electron., 35, 10532, 10.1109/TPEL.2020.2981675 · DOI
  34. Vu, 2020, An Improved LCL-L Compensation Topology for Capacitive Power Transfer in Electric Vehicle Charging, IEEE Access, 8, 27757, 10.1109/ACCESS.2020.2971961 · DOI
  35. Xia, 2018, Investigation of the constant-voltage, constant-current, and power characteristics of capacitive power transfer systems based on double-CLC topology, IEEJ Trans. Electr. Electron. Eng., 13, 1660, 10.1002/tee.22783 · DOI
  36. Li, 2018, A graphical analysis on compensation designs of large-gap CPT systems for E.V. charging applications, CES Trans. Electr. Mach. Syst., 2, 232, 10.30941/CESTEMS.2018.00029 · DOI
  37. Wang, Y., Zhang, H., and Lu, F. (2021). Current-Fed Capacitive Power Transfer with Parallel-Series Compensation for Voltage Step-Down. IEEE J. Emerg. Sel. Top. Ind. Electron. · DOI
  38. Maji, S., Sinha, S., and Afridi, K.K. (2021, January 10–14). Roadway Embeddable Multi-MHz Capacitive Wireless Charging System with Matching Network Realized using Wiring Parasitics. Proceedings of the 2021 IEEE Energy Conversion Congress and Exposition (ECCE), Vancouver, BC, Canada. · DOI
  39. Lu, F., Zhang, H., Hofmann, H., and Mi, C. (2016, January 20–24). A CLLC-compensated high power and large air-gap capacitive power transfer system for electric vehicle charging applications. Proceedings of the 2016 IEEE Applied Power Electronics Conference and Exposition (APEC), Long Beach, CA, USA. · DOI
  40. Otaki, D., Funato, H., and Haruna, J. (2021, January 20–23). Proposal of Capacitive Power Transfer System through Automotive Body Paintings. Proceedings of the 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE), Kyoto, Japan. · DOI
  41. Truong, 2021, Single-Stage Duty-Controlled Half-Bridge Inverter for Compact Capacitive Power Transfer System, IEEE Access, 9, 119250, 10.1109/ACCESS.2021.3108193 · DOI
  42. Abdolkhani, 2015, Autonomous Polyphase Current-Fed Push–Pull Resonant Converter Based on Ring Coupled Oscillators, IEEE J. Emerg. Sel. Top. Power Electron., 3, 568, 10.1109/JESTPE.2014.2377171 · DOI
  43. Ueda, 2020, Class-E 2 DC-DC Converter with Basic Class-E Inverter and Class-E ZCS Rectifier for Capacitive Power Transfer, IEEE Trans. Circuits Syst. II Express Briefs, 67, 941
  44. Ahmad, S., Muharam, A., and Hattori, R. (2020, January 15–19). Rotary Capacitive Power Transfer with Class-E Inverter and Balun Circuit. Proceedings of the 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Seoul, Korea. · DOI
  45. Muharam, 2020, Preliminary study of 50 W Class-E GaN FET amplifier for 6.78 MHz capacitive wireless power transfer, J. Mechatron. Electr. Power Veh. Technol., 11, 22, 10.14203/j.mev.2020.v11.22-29 · DOI
  46. Choi, B.H., Nguyen, D.T., Yoo, S.J., Kim, J.H., and Rim, C.T. (2014, January 18–21). A Novel Source-Side Monitored Capacitive Power Transfer System for Contactless Mobile Charger Using Class-E Converter. Proceedings of the 2014 IEEE 79th Vehicular Technology Conference (VTC Spring), Seoul, Korea. · DOI
  47. Hasan, 2021, Analysis and design of class E-LCCL compensation circuit topology circuit topology for capacitive power transfer system, Int. J. Power Electron. Drive Syst., 12, 1265
  48. Domingos, F.C., De Campos de Freitas, S.V., and Mousavi, P. (2018, January 3–7). Capacitive Power Transfer based on Compensation Circuit for Class E Resonant Full-Wave Rectifier. Proceedings of the 2018 IEEE Wireless Power Transfer Conference (WPTC), Montreal, QC, Canada. · DOI
  49. Kim, M., and Choi, J. (2021). Design of Robust Capacitive Power Transfer Systems Using High-Frequency Resonant Inverters. IEEE J. Emerg. Sel. Top. Ind. Electron. · DOI
  50. Ludowicz, W., Pietrowski, W., and Wojciechowski, R.M. (2020). Analysis of an Operating State of the Innovative Capacitive Power Transmission System with Sliding Receiver Supplied by the Class-E Inverter. Electronics, 9. · DOI
  51. Lian, 2020, Design of a Double-Sided L.C. Compensated Capacitive Power Transfer System with Capacitor Voltage Stress Optimization, IEEE Trans. Circuits Syst. II Express Briefs, 67, 715
  52. Lian, J., and Qu, X. (2019, January 18–21). A High-Performance Double-Sided L.C. Compensated CPT System with Load-Independent Constant Current Output. Proceedings of the 2019 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), London, UK. · DOI
  53. Lu, 2018, A Double-Sided LC-Compensation Circuit for Loosely Coupled Capacitive Power Transfer, IEEE Trans. Power Electron., 33, 1633, 10.1109/TPEL.2017.2674688 · DOI
  54. Xin, D., and Min, S. (2020, January 7–10). Generalized Hamiltonian Energy Modeling Method for Wireless Power Transfer System. Proceedings of the 2020 8th International Conference on Power Electronics Systems and Applications (PESA), Hong Kong, China. · DOI
  55. Deng, J., Lu, F., Li, S., Nguyen, T.-D., and Mi, C. (2014, January 17–19). Development of a high efficiency primary side controlled 7kW wireless power charger. Proceedings of the 2014 IEEE International Electric Vehicle Conference (IEVC), Florence, Italy. · DOI
  56. Yao, 2019, Analysis, Design, and Implementation of a Wireless Power and Data Transmission System Using Capacitive Coupling and Double-Sided LCC Compensation Topology, IEEE Trans. Ind. Appl., 55, 541, 10.1109/TIA.2018.2869120 · DOI
  57. Lu, 2015, A Double-Sided LCLC-Compensated Capacitive Power Transfer System for Electric Vehicle Charging, IEEE Trans. Power Electron., 30, 6011, 10.1109/TPEL.2015.2446891 · DOI
  58. Suarez, C., Kalmes, M., Suffeleers, J., and Martinez, W. (2020, January 18–21). Frequency Splitting in an LCLC Capacitive Wireless Power Transfer System for Electric Vehicle Charging. Proceedings of the IECON 2020 the 46th Annual Conference of the IEEE Industrial Electronics Society, Singapore. · DOI
  59. Atiyah, N.Q., Atilla, D.C., Aydin, C., and Mukhlif, Y.A. (November, January 31). The Analysis of Variation in Plate Geometry for Capacitive Power Transfer Pads Utilized in Electric Vehicles. Proceedings of the 2018 18th Mediterranean Microwave Symposium (MMS), Istanbul, Turkey. · DOI
  60. Vishnu, P.J., and Tummuru, N.R. (2020, January 2–4). A Phase Shift Control Strategy for Bidirectional Power Flow in Capacitive Wireless Power Transfer System Using LCLC Compensation. Proceedings of the 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE2020), Cochin, India. · DOI
  61. Hu, Z., Goodall, M., Zhao, L., Zhu, Q., and Hu, A.P. (2020, January 15–19). A Comparative Study of Different Compensation Topologies for Capacitive Power Transfer. Proceedings of the 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Seoul, Korea. · DOI
  62. Lian, 2022, An LCLC-LC-Compensated Capacitive Power Transferred Battery Charger with Near-Unity Power Factor and Configurable Charging Profile, IEEE Trans. Ind. Appl., 58, 1053, 10.1109/TIA.2021.3089448 · DOI
  63. Luo, B., Xu, L., Long, T., Xu, Y., Mai, R., and He, Z. (2020, January 15–19). An LC-CLC Compensated CPT System to Achieve the Maximum Power Transfer for High Power Applications. Proceedings of the 2020 IEEE Applied Power Electronics Conference and Exposition (APEC), New Orleans, LA, USA. · DOI
  64. Liu, 2021, Capacitive Power Transfer System with Double T-type Resonant Network for Mobile Devices Charging/Supply, IEEE Trans. Power Electron., 37, 2394
  65. Encarnacion, E.S.E., Hernandez-Gonzalez, L., Garcia, J.C.S., Ramirez-Hernandez, J., and Juarez-Sandoval, O.U. (2020, January 4–6). Modified Resonant Z Circuit Analysis by Capacitive Power Transfer. Proceedings of the 2020 IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC), Ixtapa, Mexico. · DOI
  66. Dai, 2015, Single Active Switch Power Electronics for Kilowatt Scale Capacitive Power Transfer, IEEE J. Emerg. Sel. Top. Power Electron., 3, 315, 10.1109/JESTPE.2014.2334621 · DOI
  67. Bui, D., Mostafa, T.M., Hu, A.P., and Hattori, R. (2018, January 3–7). DC-DC Converter Based Impedance Matching for Maximum Power Transfer of CPT System with High Efficiency. Proceedings of the 2018 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (Wow), Montreal, QC, Canada. · DOI
  68. Liu, C., and Hu, A.P. (2009, January 3–5). Power flow control of a capacitively coupled contactless power transfer system. Proceedings of the 2009 35th Annual Conference of IEEE Industrial Electronics, Porto, Portugal. · DOI
  69. Lu, K., and Nguang, S.K. (2017, January 20–22). LQG control of capacitive power transfer system. Proceedings of the 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Chongqing, China. · DOI
  70. Abramov, 2020, Multi-Loop Control for Power Transfer Regulation in Capacitive Wireless Systems by Means of Variable Matching Networks, IEEE J. Emerg. Sel. Top. Power Electron., 8, 2095, 10.1109/JESTPE.2019.2935631 · DOI
  71. Jeong, C.-H., Choi, H.-S., and Choi, S.-J. (2018, January 3–7). Single-Stage PWM Converter for Dual-Mode Control of Capacitive Wireless Power Transmission. Proceedings of the 2018 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (Wow), Montreal, QC, Canada. · DOI
  72. Erfani, 2020, A Dual-Output Single-Stage Regulating Rectifier with PWM and Dual-Mode PFM Control for Wireless Powering of Biomedical Implants, IEEE Trans. Biomed. Circuits Syst., 14, 1195, 10.1109/TBCAS.2020.3039690 · DOI
  73. Zhang, 2017, An LC-Compensated Electric Field Repeater for Long-Distance Capacitive Power Transfer, IEEE Trans. Ind. Appl., 53, 4914, 10.1109/TIA.2017.2697846 · DOI
  74. Ahmadi, 2022, A Filter Theory Approach to the Synthesis of Capacitive Power Transfer Systems, IEEE J. Emerg. Sel. Top. Power Electron., 10, 91, 10.1109/JESTPE.2020.3010424 · DOI
  75. Azer, 2020, Generalized State Space Average Model for Multi-Phase Interleaved Buck, Boost and Buck-Boost DC-DC Converters: Transient, Steady-State and Switching Dynamics, IEEE Access, 8, 77735, 10.1109/ACCESS.2020.2987277 · DOI
  76. Leng, 2019, Analytical Model for Abrupt Tapered Mach–Zehnder Interferometer Based on Coupled Mode Theory, IEEE Photonics Technol. Lett., 31, 1600, 10.1109/LPT.2019.2939949 · DOI
  77. Liao, 2019, Resonant Analysis of Magnetic Coupling Wireless Power Transfer Systems, IEEE Trans. Power Electron., 34, 5513, 10.1109/TPEL.2018.2868727 · DOI
  78. Varghese, 2021, Thermoelastic response of a nonhomogeneous elliptic plate in the framework of fractional order theory, Arch. Appl. Mech., 91, 3223, 10.1007/s00419-021-01962-w · DOI
  79. Xia, 2022, A Two-Stage Parameter Optimization Method for Capacitive Power Transfer Systems, IEEE Trans. Power Electron., 37, 1102, 10.1109/TPEL.2021.3097344 · DOI
  80. Wu, 2021, Efficiency Optimization Based Parameter Design Method for the Capacitive Power Transfer System, IEEE Trans. Power Electron., 36, 8774, 10.1109/TPEL.2021.3049474 · DOI
  81. Awadh, Y., and Saat, S. (2021, January 4–5). State Feedback Controller Design for Capacitive Power Transfer System. Proceedings of the 2021 International Congress of Advanced Technology and Engineering (ICOTEN), Taiz, Yemen. · DOI
  82. Gao, 2018, Capacitive power transfer through virtual self-capacitance route, IET Power Electron., 11, 1110, 10.1049/iet-pel.2017.0629 · DOI
  83. Zou, L.J., Hu, A.P., and Su, Y. (2017, January 20–22). A single-wire capacitive power transfer system with large coupling alignment tolerance. Proceedings of the 2017 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Chongqing, China. · DOI
  84. Lu, 2018, A Two-Plate Capacitive Wireless Power Transfer System for Electric Vehicle Charging Applications, IEEE Trans. Power Electron., 33, 964, 10.1109/TPEL.2017.2735365 · DOI
  85. Shu, X., and Zhang, B. (2018). Single-Wire Electric-Field Coupling Power Transmission Using Nonlinear Parity-Time-Symmetric Model with Coupled-Mode Theory. Energies, 11. · DOI
  86. Liu, 2019, Analytical Model of a 25–50 m Robust Single-Wire Electric-Field Coupling Power Transfer System Using a Limiter, IEEE Trans. Circuits Syst. II Express Briefs, 66, 978
  87. Chen, 2019, A Receiver-Controlled Coupler for Multiple Output Wireless Power Transfer Applications, IEEE Trans. Circuits Syst. I Regul. Pap., 66, 4542, 10.1109/TCSI.2019.2924949 · DOI
  88. Lu, 2016, An Inductive and Capacitive Combined Wireless Power Transfer System with LC-Compensated Topology, IEEE Trans. Power Electron., 31, 8471, 10.1109/TPEL.2016.2519903 · DOI
  89. Lu, 2017, An Inductive and Capacitive Integrated Coupler and Its LCL Compensation Circuit Design for Wireless Power Transfer, IEEE Trans. Ind. Appl., 53, 4903, 10.1109/TIA.2017.2697838 · DOI
  90. Luo, 2018, Analysis and design of hybrid inductive and capacitive wireless power transfer for high-power applications, IET Power Electron., 11, 2263, 10.1049/iet-pel.2018.5279 · DOI
  91. Zhou, 2021, Inductive–capacitive combined power transfer system and its power superposition characteristic for rail transit inspection vehicle charging, Measurement, 185, 110022, 10.1016/j.measurement.2021.110022 · DOI
  92. Li, 2018, An Inductive and Capacitive Combined Parallel Transmission of Power and Data for Wireless Power Transfer Systems, IEEE Trans. Power Electron., 33, 4980, 10.1109/TPEL.2017.2725990 · DOI
  93. Luo, 2020, Misalignment tolerance wireless power transfer system combining inductive and capacitive coupling, IET Electr. Power Appl., 14, 1925, 10.1049/iet-epa.2019.0874 · DOI
  94. Luo, 2020, Analysis and Design of Inductive and Capacitive Hybrid Wireless Power Transfer System for Railway Application, IEEE Trans. Ind. Appl., 56, 3034, 10.1109/TIA.2020.2979110 · DOI
  95. Gao, 2021, Design and Analysis of a New Hybrid Wireless Power Transfer System with a Space-Saving Coupler Structure, IEEE Trans. Power Electron., 36, 5069, 10.1109/TPEL.2020.3027473 · DOI
  96. Luo, 2019, LC–CLC compensation topology for capacitive power transfer system to improve misalignment performance, IET Power Electron., 12, 2626, 10.1049/iet-pel.2018.5606 · DOI
  97. Jing, G., Li, Y., Zhang, Z., Qian, C., Gong, Q., and Jing, Y. (2021, January 1–4). Capacitive Coupling Wireless Energy Transmission Constant Voltage System Based On Composite Network Resonance. Proceedings of the 2021 IEEE 16th Conference on Industrial Electronics and Applications (ICIEA), Chengdu, China. · DOI
  98. Li, 2020, A family of compensation topologies for capacitive power transfer converters for wireless electric vehicle charger, Appl. Energy, 260, 114156, 10.1016/j.apenergy.2019.114156 · DOI
  99. Su, 2017, Capacitive Power Transfer System with a Mixed-Resonant Topology for Constant-Current Multiple-Pickup Applications, IEEE Trans. Power Electron., 32, 8778, 10.1109/TPEL.2016.2640314 · DOI
  100. Liu, 2022, A Multi-Load Capacitive Power Transfer System with Load-Independent Characteristic for Reefer Container Application, IEEE Trans. Power Electron., 37, 6194, 10.1109/TPEL.2021.3132357 · DOI
  101. Chen, 2022, A Multi-Load Capacitive Power Relay System with Load-Independent Constant Current Outputs, IEEE Trans. Power Electron., 37, 6144, 10.1109/TPEL.2021.3123542 · DOI
  102. Mai, 2018, Double-sided CL compensation topology based component voltage stress optimization method for capacitive power transfer charging system, IET Power Electron., 11, 1153, 10.1049/iet-pel.2017.0554 · DOI
  103. Liang, J., Wu, D., and Yu, J. (2021). A Design Method of Compensation Circuit for High-Power Dynamic Capacitive Power Transfer System Considering Coupler Voltage Distribution for Railway Applications. Electronics, 10. · DOI
  104. Su, 2017, Analysis on safety issues of capacitive power transfer system, Int. J. Appl. Electromagn. Mech., 53, 673, 10.3233/JAE-160046 · DOI
  105. Jegadeesan, 2017, Wireless Power Delivery to Flexible Subcutaneous Implants Using Capacitive Coupling, IEEE Trans. Microw. Theory Tech., 65, 280, 10.1109/TMTT.2016.2615623 · DOI
  106. Erfani, 2018, Modeling and Experimental Validation of a Capacitive Link for Wireless Power Transfer to Biomedical Implants, IEEE Trans. Circuits Syst. II Express Briefs, 65, 923
  107. Erfani, 2018, Modeling and Characterization of Capacitive Elements with Tissue as Dielectric Material for Wireless Powering of Neural Implants, IEEE Trans. Neural Syst. Rehabil. Eng., 26, 1093, 10.1109/TNSRE.2018.2824281 · DOI
  108. Erfani, 2020, A 1–10-MHz Frequency-Aware CMOS Active Rectifier with Dual-Loop Adaptive Delay Compensation and >230-mW Output Power for Capacitively Powered Biomedical Implants, IEEE J. Solid-State Circuits, 55, 756, 10.1109/JSSC.2019.2956883 · DOI
  109. Sedehi, 2021, A Wireless Power Method for Deeply Implanted Biomedical Devices via Capacitively Coupled Conductive Power Transfer, IEEE Trans. Power Electron., 36, 1870, 10.1109/TPEL.2020.3009048 · DOI
  110. Ohira, T. (2013, January 15–16). Via-wheel power transfer to vehicles in motion. Proceedings of the 2013 IEEE Wireless Power Transfer (WPT), Perugia, Italy. · DOI
  111. Guo, 2020, Voltage Optimization Method for Wireless Charging of Electric Vehicles Based on Capacitive Power Transfer, Diangong Jishu Xuebao/Trans. China Electrotech. Soc., 35, 19
  112. Dai, 2016, Capacitive Power Transfer through a Conformal Bumper for Electric Vehicle Charging, IEEE J. Emerg. Sel. Top. Power Electron., 4, 1015, 10.1109/JESTPE.2015.2505622 · DOI
  113. Li, 2016, Wireless Power Transfer by Electric Field Resonance and Its Application in Dynamic Charging, IEEE Trans. Ind. Electron., 63, 6602, 10.1109/TIE.2016.2577625 · DOI
  114. Lu, F., Zhang, H., Hofmann, H., Mei, Y., and Mi, C. (2016, January 4–6). A dynamic capacitive power transfer system with reduced power pulsation. Proceedings of the 2016 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), Knoxville, TN, USA. · DOI
  115. Moghe, R., Yang, Y., Lambert, F., and Divan, D. (2009, January 20–24). A scoping study of electric and magnetic field energy harvesting for wireless sensor networks in power system applications. Proceedings of the 2009 IEEE Energy Conversion Congress and Exposition, San Jose, CA, USA. · DOI
  116. Keutel, T., Zhao, X., and Kanoun, O. (2009). C6.2—Energy Scavenging for Monitoring of Overhead Power Line Networks. Proceedings SENSOR 2009 Volume II, AMA Service GmbH. · DOI
  117. Rodriguez, J.C., Holmes, D.G., McGrath, B.P., and Wilkinson, R.H. (October, January 28). Maximum energy harvesting from medium voltage electric-field energy using power line insulators. Proceedings of the 2014 Australasian Universities Power Engineering Conference (AUPEC), Perth, WA, Australia. · DOI
  118. Moghe, 2015, A Low-Cost Electric Field Energy Harvester for an MV/HV Asset-Monitoring Smart Sensor, IEEE Trans. Ind. Appl., 51, 1828, 10.1109/TIA.2014.2354741 · DOI
  119. Chang, 2012, Electric Field Energy Harvesting Powered Wireless Sensors for Smart Grid, J. Electr. Eng. Technol., 7, 75, 10.5370/JEET.2012.7.1.75 · DOI
  120. Li, Z., Mei, H., and Wang, L. (2019). A Power Supply Technology for a Low-Power Online Monitoring Sensor Based on Electric Field Induction. Sensors, 19. · DOI
  121. Zhang, 2020, Insulated Coupler Structure Design for the Long-Distance Freshwater Capacitive Power Transfer, IEEE Trans. Ind. Inform., 16, 5191, 10.1109/TII.2019.2948649 · DOI
  122. Tamura, 2018, Design of a Capacitive Wireless Power Transfer System for Operation in Fresh Water, IEEE Trans. Microw. Theory Tech., 66, 5873, 10.1109/TMTT.2018.2875960 · DOI
  123. Naka, Y., Yamamoto, K., Nakata, T., Tamura, M., and Masuda, M. (2017, January 19–21). Verification efficiency of electric coupling wireless power transfer in water. Proceedings of the 2017 IEEE MTT-S International Conference on Microwaves for Intelligent Mobility (ICMIM), Nagoya, Japan. · DOI
  124. Tamura, M., Naka, Y., and Murai, K. (2018, January 10–15). Design of Capacitive Coupler for Wireless Power Transfer under Fresh Water Focusing on kQ Product. Proceedings of the 2018 IEEE/MTT-S International Microwave Symposium—IMS, Philadelphia, PA, USA. · DOI
  125. Ludois, 2014, Aerodynamic Fluid Bearings for Translational and Rotating Capacitors in Noncontact Capacitive Power Transfer Systems, IEEE Trans. Ind. Appl., 50, 1025, 10.1109/TIA.2013.2273484 · DOI
  126. Liang, 2020, Design, Analysis, and Experimental Verification of a Ball-Joint Structure with Constant Coupling for Capacitive Wireless Power Transfer, IEEE J. Emerg. Sel. Top. Power Electron., 8, 3582, 10.1109/JESTPE.2019.2938226 · DOI
  127. Rouse, 2022, Three-Phase Resonant Capacitive Power Transfer for Rotary Applications, IEEE J. Emerg. Sel. Top. Power Electron., 10, 160, 10.1109/JESTPE.2020.3009316 · DOI

Cited by

Sorted by citations

See all 57

Metadata

Authors
Wang, Z., Zhang, Y., He, X., Luo, B., & Mai, R.
Affiliations
Southwest Jiaotong University (CN)
Corresponding author
Luo, Bo
Venue
Electronics
Publisher
MDPI AG
Published
2022-04-06
Volume
11
Issue
7
Pages
1158
ISSN
2079-9292 (ISSN-L)
OpenAlex
W4224269875
Cited by
57
References
1
Citations by year
2026: 12 · 2025: 14 · 2024: 13 · 2023: 14 · 2022: 4
FWCI
3.07
Type
journal article
Language
en
Open access
Locations
  • Electronics (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
Keywords
capacitive power transfer, wireless power transfer, high-frequency converters, system modeling, efficiency optimization, medical devices

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Research and Application of Capacitive Power Transfer System: A Review. https://app.cochat.ai/papers/10.3390/electronics11071158
The paper
Wang, Z., Zhang, Y., He, X., Luo, B., & Mai, R. (2022). Research and Application of Capacitive Power Transfer System: A Review. Electronics. https://doi.org/10.3390/electronics11071158