Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.

A Survey on LiDAR Scanning Mechanisms

Open access

Abstract

In recent years, light detection and ranging (LiDAR) technology has gained huge popularity in various applications such as navigation, robotics, remote sensing, and advanced driving assistance systems (ADAS). This popularity is mainly due to the improvements in LiDAR performance in terms of range detection, accuracy, power consumption, as well as physical features such as dimension and weight. Although a number of literatures on LiDAR technology have been published earlier, not many has been reported on the state-of-the-art LiDAR scanning mechanisms. The aim of this article is to review the scanning mechanisms employed in LiDAR technology from past research works to the current commercial products. The review highlights four commonly used mechanisms in LiDAR systems: Opto-mechanical, electromechanical, micro-electromechanical systems (MEMS), and solid-state scanning. The study reveals that electro-mechanical scanning is the most prominent technology in use today. The commercially available 1D time of flight (TOF) LiDAR instrument is currently the most attractive option for conversion from 1D to 3D LiDAR system, provided that low scanning rate is not an issue. As for applications with low size, weight, and power (SWaP) requirements, MEMS scanning is found to be the better alternative. MEMS scanning is by far the more matured technology compared to solid-state scanning and is currently given great emphasis to increase its robustness for fulfilling the requirements of ADAS applications. Finally, solid-state LiDAR systems are expected to fill in the gap in ADAS applications despite the low technology readiness in comparison to MEMS scanners. However, since solid-state scanning is believed to have superior robustness, field of view (FOV), and scanning rate potential, great efforts are given by both academics and industries to further develop this technology.

Overview

Integrity signals

Registry

Crossref · 10.3390/electronics9050741

Cites

58 of 58 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 58 references

Research works printed but not linked: 13

  1. Robin, G.J., and Jacky, C. (2014, January 27–30). Making a difference: Examples of the use of repeat LiDAR datasets to guide river management decisions following extreme floods. Proceedings of the 7th Australian Stream Management Conference, Townsville, Australia.
  2. Ebrahim, 2015, 3D Laser Scanners’ Techniques Overview, Int. J. Sci. Res., 4, 5
  3. NASA (2016). 2016 Lidar Technologies Review and Strategy, NASA Earth Science Technology Office.
  4. Wood, D., and Bishop, M. (2012, January 3–5). A Novel Approach to 3D Laser Scanning. Proceedings of the Australasian Conference on Robotics and Automation, Victoria University of Wellington, Wellington, New Zealand.
  5. Wulf, O., and Wagner, B. (2019, December 04). Fast 3D Scanning Methods for Laser Measurement Systems, 2003; pp. 312–317. Available online: https://pdfs.semanticscholar.org/633d/42113180b581e64ac04b846cb55c6b9bffd2.pdf.
  6. Gutierrez, M.A., Martinena, E., Sanchez, A., Rodriguez, R.G., and Nunez, P. (2011, January 5–6). A Cost-Efficient 3D Sensing System for Autonomous Mobile Robots. Proceedings of the XII Workshop of Physical Agents (WAF 2011), Albacete, Spain.
  7. Leeman, J. (2019, December 04). Scanse Sweep 3D Scanner Review, Servo Magazine. Available online: https://www.servomagazine.com/magazine/article/the-multi-rotor-hobbyist-scanse-sweep-3d-scanner-review?.
  8. Hui, Z., and Siyuan, H. (August, January 28). 1D LiDAR Based on Large Apeture FPCB Mirror. Proceedings of the International Conference on Optical MEMS and Nanophotonics, Daejeon, Korea.
  9. Poulton, C.V., and Watts, M.R. (2016). IEEE SPECTRUM, Institute of Electrical and Electronics Engineers.
  10. Ackerman, E. (2016). IEEE SPECTRUM. December 2016, Institute of Electrical and Electronics Engineers.
  11. Ackerman, E. (2016). IEEE SPECTRUM. September 2016, Institute of Electrical and Electronics Engineers.
  12. Optoelectronics, L. (2020, April 23). Sf30 Datasheet. 2016; pp. 1–16. Available online: http://documents.lightware.co.za/SF30%20-%20Laser%20Altimeter%20Manual%20-%20Rev%209.pdf.
  13. Kelden, P. (2015). Development of a Low-Cost Laser Range-Finder (LIDAR). [Master’s Thesis, Chalmers University of Technology].

Cited by

See all 422

Metadata

Authors
Raj, T., Hashim, F. H., Huddin, A. B., Ibrahim, M. F., & Hussain, A.
Affiliations
National University of Malaysia (MY)
Corresponding author
  • Raj, Thinal
  • Hashim, Fazida Hanim
Venue
Electronics
Publisher
MDPI AG
Published
2020-04-30
Volume
9
Issue
5
Pages
741
ISSN
2079-9292 (ISSN-L)
OpenAlex
W3021999445
Cited by
413
References
58
Citations by year
2026: 42 · 2025: 107 · 2024: 92 · 2023: 95 · 2022: 55 · 2021: 21 · 2020: 1
FWCI
27.70
Type
journal article
Language
en
Open access
Locations
  • Electronics (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Universiti Kebangsaan Malaysia research grant (DIP-2018-020)
Topics
  • Physical Sciences › Physics and Astronomy › Instrumentation › Advanced Optical Sensing Technologies
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Systems and Laser Technology
  • Life Sciences › Agricultural and Biological Sciences › Forestry › Remote Sensing and LiDAR Applications
Keywords
LiDAR, scanning mechanism, solid-state LiDAR, time-of-flight LiDAR, 3D LiDAR, driver assistance systems, size, weight, and power, field of view, scan rate

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Survey on LiDAR Scanning Mechanisms. https://app.cochat.ai/papers/10.3390/electronics9050741
The paper
Raj, T., Hashim, F. H., Huddin, A. B., Ibrahim, M. F., & Hussain, A. (2020). A Survey on LiDAR Scanning Mechanisms. Electronics. https://doi.org/10.3390/electronics9050741

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.