The DOI matches its Crossref record; 39 of the 41 references it cites were found in a registry or an index; none of the 42 sources its claims cite is checked for support yet.
Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels
Open accessAbstract
Methanol and ethanol are among the most important biofuels and raw materials used to produce biorenewable fuels. These fuels are used with varying water contents. Nevertheless, the exact impact of the water content of these fuels on the energy potential and combustion characteristics is still unknown. Besides that, there are two noticeable risks (environmental impact of combustion and fire risk) associated with their production, processing, and utilization. Likewise, impact of the water content of these fuels on fire risk and the impact of their combustion on the environment is also unknown. The best indicator of energy potential is the effective heat of combustion, and the best combustion characteristic and indicator of the impact of the combustion of alcohols on the environment is the carbon monoxide (CO) yield, whereas the fire risk of liquid fuels is quantified by the flash point and maximum heat release rate (mHRR). The dependency of flash point on the water content was determined via the Pensky-Martens apparatus and the dependencies of the effective heat of combustion, CO yield, and mHRR on the water content were determined via the cone calorimeter. With increased water content, the flash points of both methanol and ethanol exponentially increased and the both effective heat of combustion and mHRR almost linearly decreased. In the range of water content from 0 to 60%, the CO yield of both methanol and ethanol was practically independent of the water content.
Overview
CoChat Summary
TL;DR
This study quantifies how water content in methanol and ethanol fuels affects their energy potential, combustion characteristics, environmental impact, and fire risk, using a Pensky-Martens apparatus for flash point and a cone calorimeter for heat release and CO yield. Increasing water content raises flash point exponentially and lowers effective heat of combustion, mHRR, and MARHE linearly, while CO yield per released heat rises with water content.
Key findings
- Flash point increased exponentially with water content: undiluted methanol and ethanol had flash points of 13 °C and 14 °C, rising to 55 °C and 50 °C at 90% water content; even at 90% water the alcohols still behaved as flammable liquids.
- Effective heat of combustion (EHC), maximum heat release rate (mHRR), and maximum average rate of heat emission (MARHE) decreased linearly with increasing water content. Undiluted EHC was 23.9 MJ/kg for methanol and 32.7 MJ/kg for ethanol; at 40% water methanol reached 17.25 MJ/kg and at 60% water ethanol reached 20.4 MJ/kg, comparable to wooden fuels (17–18 MJ/kg).
- CO yield per mass loss was practically independent of water content for methanol over 0–60%, while ethanol's CO yield per mass loss slightly decreased over that range; CO yield per released heat increased exponentially with water content for both fuels, with a maximum at 80% water content.
- Critical fuel contents for spontaneous flame extinction at 10 kW/m² heat flux were 15.6–17.3% for methanol and 11–14.2% for ethanol.
Methods
- Methanol and ethanol (99.80% purity, Centralchem Slovakia) were diluted with distilled water to 0, 10, 20, 30, 40, 50, 60, 70, 80, and 90% water content for flash point tests, and to 0, 20, 40, 60, and 80% for calorimeter tests.
- Flash point was measured with a Pensky-Martens apparatus (NPM 131, Normalab) per ISO 2719:2016, with samples and flask cooled to −15 °C (0–70% water) or 0 °C (80–90% water).
- EHC, HRR, mHRR, MARHE, and CO yield were measured with a dual cone calorimeter (Fire Testing Technology) per ISO 5660-1:2015, modified with a liquid sample container (106 mm internal diameter, 20 mm height), 85 ± 5 mL sample volume, and 10 kW/m² heat flux.
Limitations
- The paper states that the critical fuel content for spontaneous flame extinction applies only to these experimental conditions, and that the difference between the cone calorimeter critical water content and the flash point method arises from different measurement procedures.
- The paper notes that comparison of heat release rate with other studies is complicated because this is the first study to fully examine the impact of water content on heat release rate and the environmental impact of methanol and ethanol combustion.
- Evident from the text: the critical fuel content for solutions with alcohol content above 40% was not determined because only a negligible residue remained during combustion of the 60% and 80% alcohol solutions.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures









Verification
Claims the paper makes
0 Valid · 5 Not valid · 18 Not checked · 73 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“At a water content of 80%, the average methanol-to-water ratio in the combustion zone was approximately 0.50, and the average ethanol-to-water ratio was approximately 0.51 (Figure 6).”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 3. Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The flash point of the undiluted methanol was 13 • C and the undiluted ethanol had a flash point of 14 • C.”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 3. Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The EHC values (Figure 5) of undiluted methanol (23.9 MJ/kg) and ethanol (32.7 MJ/kg) were approximately equal to the maximum theoretical gross calorific values of methanol (22.7 MJ/kg) and ethanol (29.7 MJ/kg).”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 3. Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The EHC values (Figure 5) of undiluted methanol (23.9 MJ/kg) and ethanol (32.7 MJ/kg) were approximately equal to the maximum theoretical gross calorific values of methanol (22.7 MJ/kg) and ethanol (29.7 MJ/kg).”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 3. Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It shows a noticeable decrease in the heat release rate with increasing water content.”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 3. Results and Discussion
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
42 more claims
Create a free account to see all 96 claims and to verify the 41 references still open.
- It may state two separate claims as one. 21
- Probably not a substantial claim. 28
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 1.
“While most components of fire risk (flash point and released heat) decrease with increasing water content”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 4. Conclusions
“With increasing water content, the flash point of both methanol and ethanol considerably increased.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 4. Conclusions
“the CO yield (per mass loss) of ethanol with decreasing water content (in the range 0 to 60%) slightly decreases.”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > Water Content in Solution (%) 60 80
“the CO yield (per mass loss unit) of ethanol with increasing water content (in the interval of 0 to 60%) decreases.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > 3. Results and Discussion
“MEW = (MLS/100) × (1 -EHC/EPF) (3”
§ Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels > Water Content in Solution (%) 60 80
“Mass loss of methanol solution (g) 35.5 8.1 Mass loss of ethanol solution (g) 35.4 14.8 Mass of burned methanol (g) 20.9 4.1 Mass of burned ethanol (g) 21.9 7.5 Mass of water evaporated from methanol solution (g) 14.6 4”
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Karlsson, B., & Quintiere, J. (1999) · CRC Press eBooks · doi:10.1201/9781420050219 · Cited by 900
Simoneit, B. R. T., Rogge, W. F., Mazurek, M. A., Standley, L. J., Hildemann, L. M., & Cass, G. R. (1993) · Environmental Science & Technology · doi:10.1021/es00048a034 · Cited by 443
XV. The relation of oxygen to the heat of combustion of organic compounds
Thornton, W. M. (1917) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786440208635627 · Cited by 371
Ferek, R. J., Reid, J. S., Hobbs, P. V., Blake, D. R., & Liousse, C. (1998) · Journal of Geophysical Research: Atmospheres · doi:10.1029/98jd00692 · Cited by 337
Srinivasan, K. K., Mago, P. J., & Krishnan, S. R. (2010) · Energy · doi:10.1016/j.energy.2010.02.018 · Cited by 277
Maurya, R. K., & Agarwal, A. K. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.015 · Cited by 268
Beyer, G. (2001) · Fire and Materials · doi:10.1002/fam.776 · Cited by 246
Hydrous ethanol–gasoline blends – Combustion and emission investigations on a Flex-Fuel engine
Melo, T. C. C. D., Machado, G. B., Belchior, C. R. P., Colaço, M. J., Barros, J. E. M., de Oliveira, E. J., & de Oliveira, D. G. (2012) · Fuel · doi:10.1016/j.fuel.2012.03.018 · Cited by 183
Lifecycle assessment of fuel ethanol from sugarcane in Brazil
Roberto Ometto, A., Zwicky Hauschild, M., & Nelson Lopes Roma, W. (2009) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0065-9 · Cited by 158
Research works printed but not linked: 2
- Ward, D.E., and Hao, W.M. (1992, January 16–25). Air Toxic Emissions from Burning of Biomass Globally: Preliminary Estimates. Proceedings of the 85th Annual Meeting and Exhibition, Air and Waste Management Association, Kansas City, MO, USA.
- Zhang, J. (2008). Study of Polyamide 6-Based Nanocomposites. [Ph.D. Thesis, Polytechnic University].
Cited by
Lee, C. C., Tran, M., Tan, B. T., Scribano, G., & Chong, C. T. (2020) · Fuel · doi:10.1016/j.fuel.2020.119749 · Cited by 112
Zare, T. S., Khoshsima, A., & ZareNezhad, B. (2021) · Fuel · doi:10.1016/j.fuel.2021.120249 · Cited by 21
Experimental and numerical fire behaviour analysis in Eucalyptus globulus trees
Modarres, M., Almeida, M., & Viegas, D. X. (2024) · International Journal of Wildland Fire · doi:10.1071/wf23131 · Cited by 18
Influence of fuel mixture and catalyst on the ethanol burner flue gas composition
Ryšavý, J., Horák, J., Krpec, K., Hopan, F., Kuboňová, L., & Molchanov, O. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.10.181 · Cited by 15
Shepel, O., Matijošius, J., Rimkus, A., Orynycz, O. A., Tucki, K., & Świć, A. (2022) · Energies · doi:10.3390/en15217892 · Cited by 12
Metadata
- Authors
- Martinka, J., Rantuch, P., & Wachter, I.
- Affiliations
- Slovak University of Technology in Bratislava (SK)
- Corresponding author
- Martinka, Jozef
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2019-09-10
- Volume
- 12
- Issue
- 18
- Pages
- 3491
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2972918552
- Semantic Scholar
- a749d4d919ad99d881234f900883a7cc7b1c530d
- Cited by
- 29
- References
- 41
- Citations by year
- 2026: 11 · 2025: 4 · 2024: 4 · 2023: 3 · 2022: 3 · 2021: 3 · 2020: 1
- FWCI
- 0.63
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Agentúra na Podporu Výskumu a Vývoja (APVV-16-0223)
- Topics
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- methanol, ethanol, moisture content, biofuels, effective heat of combustion, carbon monoxide yield, flash point, fire risk, combustion emissions, alcohol chemistry
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels. https://app.cochat.ai/papers/10.3390/en12183491
- The paper
- Martinka, J., Rantuch, P., & Wachter, I. (2019). Impact of Water Content on Energy Potential and Combustion Characteristics of Methanol and Ethanol Fuels. Energies. https://doi.org/10.3390/en12183491
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.