Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press
Open accessThe DOI matches its Crossref record; 16 of the 17 references it cites were found in a registry or an index.
Abstract
The study deals with the energy-saving process of hot open die elongation forging of heavy steel forgings on an 80 MN industrial hydraulic forging press. Three innovative energy-saving power supply solutions useful for industrial hydraulic forging presses were analyzsed. The energy-saving power supply of hydraulic forging presses consists in reducing electricity consumption by the electric motor driving the pumps, reducing the noise emitted by pumps and reducing leaks in hydraulic piston cylinders. The predicted forging force as a function of heavy steel forging heights for various deformation temperatures and strain rates was determined. A simulation model of the 80 MN hydraulic forging press is presented, which is useful for determining the time-varying parameters during the forging process. An energy-saving control for the hydraulic forging press based on the forging process parameters’ prediction has been developed. Real-time model predictive control (MPC) was developed based on multiple inputs multiple outputs (MIMO), and global predictive control (GPC). The GPC has been implemented in the control system of an 80 MN industrial hydraulic forging press. The main advantage of this control system is the repeatability of the forging process and minimization of the size deviation of heavy large steel forgings
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The state-of-the-art in this field does not offer a general approach to increasing the efficiency of a system driven by a hydraulic actuator.”
From A systematic management and control methodology for high energy saving in applications equipped with hydraulic servo-axes (2024) · cites this paper as Dindorf and Wos (2020)
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“An overall energy saving of the same order of magnitude as the previous ones, i.e. 20%, was achieved by Dindorf and Wos (2020) in his study on a hydraulic 80 MN forging press with parallel connection of three pumps and a real-time model predictive control based on multiple inputs multiple outputs, as well as a global predictive control.”
From A systematic management and control methodology for high energy saving in applications equipped with hydraulic servo-axes (2024) · cites this paper as Dindorf and Wos (2020)
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“In these works, the energy savings are obtained at the expense of increasing the number of motors and pumps (Huang et al., 2019), by carefully modifying and combining the working cycles of two different presses (Li et al., 2017), or by introducing several circuital modifications (Dindorf & Wos, 2020).”
From A systematic management and control methodology for high energy saving in applications equipped with hydraulic servo-axes (2024) · cites this paper as Dindorf & Wos, 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lin, Y. C., Chen, D., Chen, M.-S., Chen, X.-M., & Li, J. (2016) · Neural Computing and Applications · doi:10.1007/s00521-016-2556-5 · Cited by 92 · cited 1×
“A precise backpropagation (BP) neural network based on an online model predictive control (MPC) strategy is proposed to control the time-variant and nonlinear forging process on a 4000T hydraulic press machine in the study [9].”
MethodAdaptive Control of the Electro‐Hydraulic Servo‐System with External Disturbances
Wos, P., & Dindorf, R. (2013) · Asian Journal of Control · doi:10.1002/asjc.602 · Cited by 65 · cited 2×
“For simplicity, Ch ( z−1 ) , Cp ( z−1 ) polynomial in Equation (17) is chosen to be 1, then the other polynomials are [23]: { Ah(z−1) = 1 + a1h z−1 + · · ·+ anah z−nah Bh(z−1) = 1 + b1h z−1 + · · ·+ bnah z−nah (18) { Ap(z−1) = 1 + a1p z−1 + · · ·+ anap z−nap Bp(z−1) = 1 + b1p z−1 + · · ·+ bnap z−nap (19)”
MethodSelf-citationReal-time comparison of a number of predictive controllers
Abu-Ayyad, M., & Dubay, R. (2007) · ISA Transactions · doi:10.1016/j.isatra.2007.02.005 · Cited by 40 · cited 2×
“signals to minimize the multistage function defin d over th prediction horizon [22].”
BackgroundMethodReal-Time Process Characterization of Open Die Forging for Adaptive Control
Nye, T. J., Elbadan, A. M., & Bone, G. M. (2000) · Journal of Engineering Materials and Technology · doi:10.1115/1.1396350 · Cited by 39 · cited 2×
“[4] specifies real-time derivation of the actual spread coefficient for a given workpiece as it is being formed.”
BackgroundMethodGeneralized predictive optimal control: an introduction to the advantages and limitations
Grimble, M. J. (1992) · International Journal of Systems Science · doi:10.1080/00207729208949190 · Cited by 30
Peng, Y., Wang, J., & Wei, W. (2014) · Frontiers of Information Technology & Electronic Engineering · doi:10.1631/jzus.c1300182 · Cited by 27
Chadha, K., Shahriari, D., Tremblay, R., Bhattacharjee, P. P., & Jahazi, M. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-017-4177-8 · Cited by 26 · cited 1×
“The stress–strain curves describing the deformation behavior of the dendritic microstructure of the cast ingot were analyzed in terms of the Arrhenius and Hansel-Spittel models, which were implemented in Forge software [17].”
MethodSun, W., Cai, J.-J., Du, T., & Zhang, D. (2010) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(10)60180-x · Cited by 21 · cited 1×
“[11], the theoretical minimum and actual specific energy consumption (SEC) of the typical steel manufacturing process (SMP) were studied.”
BackgroundPrediction of Material Spreading in Hot Open‐Die Forging
Knap, M., Kugler, G., Palkowski, H., & Turk, R. (2004) · steel research international · doi:10.1002/srin.200405787 · Cited by 14 · cited 1×
“where a is the value of the spreading coefficient determined experimentally by Tomlinson and Stringer [14], which was adapted to the empirical model via the equation [15]:”
MethodHot flow stress models of the steel C45
Opěla, P., Schindler, I., Kawulok, P., Vančura, F., Kawulok, R., Rusz, S., & Petrek, T. (2015) · DSpace VŠB-TUO (VŠB-TUO) · Cited by 13
Research works printed but not linked: 5
- Nefissi, 2008, Prediction and simulation of axisymmetric forging load of aluminum, Adv. Prod. Eng. Manag., 2, 71
- Mehta, 2011, Computer Simulation of Forging Using the Slab Method Analysis, Int. J. Sci. Eng. Res., 2, 1
- Zdonek, 2013, Innovative solutions in the technology for manufacturing large-size forgings from ultra-clean steels for power equipment, Work. Iron Met. Inst., 4, 53
- Tomlinson, 1959, Spread and Elongation in Flat Tool Forging, J. Iron Steel Inst. Lond., 10, 157
- Ganesh., U.G., Krishna, M., and Hariprasad, A.P. (2011, January 15–17). Review on models for a generalized predictive controller. Proceedings of the CCSEA 2011, First International Conference on Computer Science, Engineering and Applications, Chennai, India.
Cited by
Jonšta, P., Jonšta, Z., Brožová, S., Ingaldi, M. K., Pietraszek, J., & Klimecka-Tatar, D. (2021) · Materials · doi:10.3390/ma14185160 · Cited by 48
“The reaction of REMs with Al2O3 formed clusters during casting [14,15], which resulted in a narrowing of the casting stream.”
BackgroundMIMO modeling and multi-loop control based on neural network for municipal solid waste incineration
Ding, H., Tang, J., & Qiao, J. (2022) · Control Engineering Practice · doi:10.1016/j.conengprac.2022.105280 · Cited by 39
Morrell, S. (2022) · Minerals Engineering · doi:10.1016/j.mineng.2022.107431 · Cited by 29
Sword, J. I., Galloway, A., & Toumpis, A. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00600 · Cited by 41
An integrated energy efficiency evaluation method for forging workshop based on IoT and data-driven
Zhang, H., Li, L., Li, L., Cai, W., Liu, J., & Sutherland, J. W. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.10.010 · Cited by 25
Metadata
- Authors
- Dindorf, R., & Wos, P.
- Affiliations
- Kielce University of Technology (PL)
- Department of Manufacturing Engineering and Metrology, Kielce University of Technology, 25-314 Kielce, Poland
- Corresponding author
- Dindorf, Ryszard
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2020-04-02
- Volume
- 13
- Issue
- 7
- Pages
- 1620
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W3014152473
- Semantic Scholar
- 315fd4cf352d4c4ff637e06e3609aba2aa93e457
- Cited by
- 46
- References
- 17
- Citations by year
- 2026: 5 · 2025: 11 · 2024: 8 · 2023: 6 · 2022: 6 · 2021: 5 · 2020: 4
- FWCI
- 2.58
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Narodowe Centrum Badań i Rozwoju (POIR.01.01)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Hydraulic and Pneumatic Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Energy Efficiency and Management
- Physical Sciences › Engineering › Control and Systems Engineering › Industrial Technology and Control Systems
- Keywords
- energy conservation, deformation temperature, strain rate, hydraulic power supply, forging simulation, model predictive control, multivariable control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press. https://app.cochat.ai/papers/10.3390/en13071620
- The paper
- Dindorf, R., & Wos, P. (2020). Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press. Energies. https://doi.org/10.3390/en13071620
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.